Lampshades: Here are two ideas: If you want one that looks modern, look for a medicine, glue or paint tube that is nearly empty and clean it out. If you cut off part of the tube and the nozzle, it will look like a very modern, funnel-shaped shade. White tubes don't even need to be painted, but if there is a label, you can paint it whatever color you like. Then put the wire through the nozzle and it will hang. If the hole in the nozzle is too big and the bulb falls through, string a small button on the wire before you put on the shade to hold the bulb in place. You can also cut a pingpong ball in half, punch a hole to put the wire through, and leave it white or paint designs on it. If you want a Victorian-type shade, look for cat toys in the supermarket or pet shop. Here in the States they sell transparent colored plastic balls with a bell inside. Saw the two halves of the ball apart, drill a hole in the top of each half, and you have two pretty "glass" shades. The ball halves are different colors, so you get two different colored shades! You can make them even fancier with some gold braid or fringe around the bottom. This isn't an original idea, but I can't remember which magazine or book had the tip in it awhile back. Loretta Sniarowski |
Psychic Minis: If you want some web pages to whet your imagination regarding the metaphysical roombox, here are three that suggest lots more accessories. Some of these might also be of interest to people doing fairy scenes: http://www.themagicalblend.com/faq.html http://www.almostradio.com/earthsongs/witch.htm Mary, Oregon |
Posters and art: These are all non-mini sites, but have useable posters etc for us mini-nuts. Sondra Klingbeil |
Sunfish boat: Check with the local marine supply store for information on dealers. Check the yellow pages. Ifthere is no "local" marine supply store for you, go to the public library andlook up such suppliers in the yellow pages there. The large main libraries and mostof the city library systems have phone books from all over the United States in thereference sections. The library may also have books on the subject you want -they usually have sections where do-it-yourself is highlighted. Jeanne |
Easy Garden Ornament: Some gift shops are selling mini resin garden ornaments, including a gazing globe (witch ball)with a silvered glass-ball on a pedestal. Around $8.00, it's quite usable, but itseems maybe a little bit clunky. To improvise your own, all it takes is asilvered tree ball, diameter 1 inch or less; something for the neck of the ball to fitdown into; enough of a base to support it; and something between the top and the bottom. Inreal life a concrete pedestal 2 or so feet high is fairly traditional, but garden storesand catalogs are full of variations, both formal and whimsical. You can make a column of corrugated paper (as from light bulb packaging), glue this onto acouple of different-size flat washers, and maybe add a collar of clay or cording tothe top end. Or saw one end off a short plastic cake-column. Or stick the cap of a lipstick tube onto rounds or squares of clay. Or use a stack of flowerpots. Lots of possibilities. I can't find any history for them, but myearliest sighting was in the mid-1930's, when a little kid exploring wintry small-town backyards(trespassing, really, but no one noticed, or minded) was brought up short by one. Magic. Old house, old garden: it would have been around a few years by then. Anyhow, one of these would "feel" right in a late-Victorian setting. Or, equally, could be part of the stock in a modern plant-and-garden store. Mary |
Stick-on labels and wedding bouquets: Among the office supplies there are usually packages of stick-on labels, and I buy oneof each size in white. These are useful for all kinds of miniature purposes. The round ones are good as a backing for making wedding bouquets and other floral arrangements. I leave the labelwhite for a wedding bouquet, and sometimes paint it green or another color if I'm makingsomething else. Leave the sticker on its backing sheet, and clip or tape thepaper to an index card so it can be held upright to see how the bouquet is looking. Decide on the shape first - triangle, round, or s-curve. A tiny blob of clear silicone or extra-heavy Tacky in the center of the label serves as the base. If using trailing greenery I usually insertit first, leaving it long. If it's ivy I'm making, to avoid bulk and to make it hang more naturally I use beading wire or green thread, usually 3 or 5 strands. Add the focal flowers, then filler, inserting into the silicone blob. When the baseis covered, tip any additional flowers with glue to insert. Then add the ivy leaves, gluing them where needed in the bouquet and along the stems. The last thing I do is trimming the streamers, varying the lengths. Additional lengths can be added if necessary. Use a second label as a backing. If it is a gift, I write my name and the date before removing from the backing paper. Very thin silk ribbon tied in knots at the ends looks good behind a round tussy mussy-type bouquet. Tiny lightweight angel lace or other lace cut into narrow lengths can be glued to this label if a frill is wanted to show behind the bouquet. I usually add these after the arrangement is complete, attaching the ribbons to the sticky side of the bouquet's label while I hold it upright. I usually add the lace to the backing label,then put the backing label on to encase the lace edges and/or the tops of the ribbons. Let the arrangement dry thoroughly before adding the backing label. If the bouquet is to be in a doll's hand where the back can be seen, the labels can be scrunched into a cone shape while the glue is dampish, and, as someone on the list has already suggested, the pointed end of a toothpick can be inserted in the center for a handle. If the bouquet is to be attached where it doesn't show, loops of white or green thread can be used as a hanger. This procedure also works for swags and coffee-table type arrangementr bouquets, which you might want to s, and can also be used fo switch to different containers. Put a bit of silicone or glue (or clay if you don't want it to be permanent) into the container, trim the label if necessary and insert with tweezers. Add a bit of moss or soil to the top if necessary. The same process works great for making mini gift bows, too. I have also used them to hold tiny quarter scale glasses andother objects, which are difficult to keep straight, then stuck the labels,trimmed to fit, on a shelf or in the cupboard. If the label is painted the same color it'susually unnoticeable. If you want it removable, put a second label on thesticky back, then attach with blue-tac or wax. Wanna |
Victorian gazing balls: I was in the grocery store looking a little toys (as usual for mini ideas) and saw someiridescent shooter marbles that looked about the right size. In my 1/2" 'dollhouse'I have a clear marble glued to half a brass grommet for a mini crystal ball. Charlene Mirabella |
Cake decorating columns: I use the stone paint on mine, it does take 2 or 3 coats to cover. Or if I want a metal look I use Modern Options Bronzepaint. Charlean |
Victorian gazing balls: I use the small glass Christmas ornaments for the gazing balls. Charlean |
Snakes: Archee McPhee's (in Seattle) is a very strange store – sort of a trick and puzzle type of place. This iswhere you would go for rubber chickens etc. They occasionally have strange"stuff" that we can use. I found some wonderful little vinyl snakes (2different poses) and they had lizards and perhaps some other small reptile type critter. They would need to be repainted for better realism but they're cute. If any of you are desperate for a creepy crawly, email privately and we can figure something out. They are definitely in 1/12 scale. http://www.archiemcphee.com W. Marie |
| Previous 10 | Next 10 Page 1012 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |