Vanity Trays: I found palette sequins in mirror finish at Wally world in one inch size. I glued 3 of them together for rigidity then glued the rings from a bridal decor shop for the edge. The tiny holes in the sequins were covered by a bottle and if the rings didn't quite meet at the back on some - found they come in different sizes later - then most trays are set so you can not see the back or you could put a decoration in the gap. This was less costly than using mirrors plus not quite so heavy. Carol |
Pie Pans: Have you thought of the beer bottle caps, or coke caps, etc. they have the rims fence like pie pans. To open one with out bending it, put a dime, or a washer the size of the cap, on top of the cap and then use the bottle opener, and lift up gently. The top remains flat. Then paint it any color you like. Joseph |
Pie Pans: I use aluminum tooling foil, (foil pie tins will work). Cut a 1 1/4" circle, place it on a piece of folded paper towels or thin foam rubber, (I use a piece of shoe insoles). Using a stylus, press firmly approximately 1/8" from edge, making dents about 1/8 " apart. Then, pressing firmly, connect the dots. This makes the foil cup up and makes a scallop edge pie pan. Flo |
Pie Pans: I took a piece of my aluminum and shoved it down into a bottle cap. Use a ball point pen to run around the bottom of the aluminum inside the cap. Bend the aluminum out over the edge of the cap and trim it off close to the edge. It gives the pan a wavy edge. Roll out a pie of sculpy for the crust, lay it inside and go around the edge of the crust with tweezers squeezing the edge. Makes a great looking fluted edge. Elizabeth Cooper |
Western Saddle: Go to http://www.riorondo.comThey carry saddle kits and just about everything else you will need. Also, Nutshell carried a series of articles by Sylvia Roundtree back in the 80's on making bits, bridles, and an English saddle. You can get reprints from the customer service at DHM for a modest fee. Rose |
Spectacles: I have a catalogue from Butler Manufacturing. In it are four realistic pairs of specs. Size and price are not listed but their email is butlerco@setnet.com.au. Dee |
Fly Paper: When you get the fly paper up, how about tying black thread (maybe button thread - you'd have to try different weights) into a double knot for the fly's body and clip the threads about an eighth of an inch long for the wings? You can glue them to the fly paper. Dani |
Lamps: I've used a clear bugle bead for the glass funnel. I've been very happy with the result. Pamela |
Lite Brite Pegs: Anyone who is familiar with my projects will know that I use these pegs quite a bit.... Besides the jelly jars (red for raspberry, light red for strawberry, amber for peach or marmalade, green for mint, purple for grape.. which are made by cutting off the slanted, large end (whole for large jars and half for smaller. Top with a white punched round for a lid or a round of fabric tied with thread for a fancy country look). The large or small ends can be cut for glasses of juice or whatever depending on the color.....clear ones for clear glasses or glasses of water. For a half filled glass of whatever, use a clear peg section and color with permanent marker pens for the liquid. The pegs are easily carved by hand or with the aid of a moto tool. They can be shaped into bottles (see an upcoming DM article for soda bottle instructions) of almost any variety....the amber ones are perfect for beer or honey. When you choose a peg, look in it and you will see a bubble.....placed just right the bubble will add life to a bottle, jar etc. If you have the patience the small pointed ends can be carved or turned (insert them into a variable speed drill for turning) for ink bottles, perfume bottles etc.......the colors are perfect for this. Any dullness brought about by carving, sanding etc. will disappear with a coat of clear nail enamel. By the way, the pegs can be purchased separately from the game or look for bags full at 2nd hand stores. Joann Swanson |
Mini Tea Tins: I bought a mini tea tin in Chicago last year at the International Miniatures Show. It is a kit that you put together. It is made of tin and it has little hinges with it. I haven't put it together yet. I don't remember who I bought it from, but the name on the directions is Mary Ann's Mini Pearls, Mary Ann Ledyard, Wright Guide Miniatures. Nancy |
| Previous 10 | Next 10 Page 1017 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |