Hedgehogs: Andrea Barham, in her book "Making Dollshouse Accessories," suggests using a Casuarine cone (found at craft or florist suppliers,) which come from Australia or Asia. Sand off just under half of the cone lengthwise, paint the prickles a mixture of brown and black, add highlights in white to the tips of the prickles, and paint the snout and underside dark brown. Finish up by painting the eyes and the tip of the snout black and varnish them to make them appear moist. Apparently, these were the essential fireplace accessory of the 1600's. They ate all manner of bugs and such as well as table scraps.


Bottles and stuff: Don't forget to break open old dead telephones.  They have little glass striped "candies" in them as well as scale cylinders in black and light blue that look great when sprayed white and covered with a label from the Sunday paper. 

Gail Spector


Picture frames: I spent five years in a framing shop and I very rarely cut a frame that was a perfect fit. They were perfect for the picture after it was matted! White card stock would make a great mat material. Of course then you need the perfect fit again. That is why custom frames are so popular. A shop like Smaller Than Life can make the frame for any picture after it is matted. I read where people are going through all kinds of effort to get pictures but the frame is what makes or breaks the appearance at the end of the day. In miniatures the frame will most often be the best-seen part of a picture on the back wall of a room. Of course there are exceptionsto this rule. Many great classics did not have mats. However if you were to see the real thing some turn out to be five feet tall or better.

Bill


Buckles and straps for trunks: You can use a jump ring the size needed for your trunk, thread strap under one side and glue a finepiece of wire brass or gold tone across the ring, then go over the wire and under the other side. You can also stick a small end of wire through the strap by threading it in a needle, glue underside and cut, it looks a lot like a buckle that has been buckled.

Lenora


Trains: I found a great little train set up at Wal-Mart tonight.  It's a key ring with a tiny, landscaped train track on it.   It's a Lionel Train and the package says, "Miniature Santa Fe train runs around the track and through the tunnels."  There's a lever on the side that makes itrun.  The base is thick, but could be sunk into a table of some kind.

Quinn


Flower Kits: I wanted to suggest that you invest $2 for the LITTLE GOODIES catalog.  You will find ads for this company in the classified sections of both Miniature Collector and Dollhouse Miniatures magazines each month.

I learned my craft with these kits!  They are all pre-punched, very well designed flower/leaf parts and have very good instructions.  Most of the kits are very reasonably priced - many are under $5 each.  Each kit has a list of necessary tools/supplies on the back of the package, which you should be able to obtain very easily at a local minis store (or craft store if you don't have a minis store nearby).  The one tool which I strongly urge you to purchase is the Kemper Double-Ball Stylus, if you do not have one already.  It really is an important one when making flowers.   Little Goodies offers them in the catalog, too.

Laura in OKC


Miniature Jell-o: I think  maybe those jell type candles could be used as Jell-o.  They 're made in several colors and smell good too!

Joanne in Southern N.J.


Coffee Maker: To the person looking for the coffee maker, I got this from another mini group, I haven't written her yet, but plan to. The lady who stocks the ACME Refrigerator Magnets, Carroll. L. Meeks, 3636 Rosario Crest Lane, Anacortes, WA 98221, (360) 293-8176. Her e-mail is loretta@fidalgo.net, If you want to see what's available go to the ACME website http://www.aimcs.com/acme/kfun.htm

Judy P


"I have covered the steamer trunk - you know the ones that sit on one end and open up to have drawers and hangers inside for your ocean voyage - with leather. I ended up overlapping the leather on the corner edges by about 1/8". I could cut the leather off flush, but that leaves a seam as well.

I would like to cover the corners/edges with something that is not too difficult to work with, and which looks good *grin*. I would also like it not to be shiny if possible. I have heard about the tape that people use for decorating full-size cars, but don't know anything about it."

In a class I took at Mayfest, I covered a dome top trunk with leather. Although it is not shaped quite the same as yours, what we did with the corners and edges would work for you. We used a strip of the same leather, cut to about a 3/16" overlap on each side (so it was a total width of 3/8" wide strip) and covered the edges with that. It was centered along the edge so that it overlapped evenly on both planes of the sides. Then at the corners, we used mini nails to look like the studs or grommets that the full sized leather covered trunks have. It came out looking very realistic and now happily resides in my attic roombox!!

Tere Perry


Trunk: Perhaps you can use some of that flat cane used for (normal size) chairs. It will look like the wooden strips to protect your leather from scratching. Just glue with tacky glue and have perhaps a little nail on the corners.

Dorothee


Previous 10 | Next 10


Page 1024 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)