Wedding Dome: Isabel asked for help with a wedding room box. I made a dome for my daughter Andrea's first anniversary. Her wedding took place in Denver at the historic Grant-Humphreys Mansion. I was fortunate to find a water color picture of the house in a calendar of historic Denver houses. I made a folding screen for the background, using that picture. The dress was the hardest part for me. I found a dress in a Susan Sirkis Wish Booklet that came close in design and was able to make the dress from it. I made several versions in different fabrics before I was successful. The flowered fabric draping the table is an almost perfect mini match for the fabric in the bridesmaids dresses. I made the cake from Fimo. You can't really see the tiny shoes, but they are decorated with little beads. I had fancied up her real shoes with lace appliqués and pearls. I also copied her bridal bouquet of white roses. Just put lots of love into it and your daughter will treasure it forever!

Linda P in TN


Wedding Bag: Your wedding room box can be as simple or as elaborate as you want it to be. I did a wedding memory box for my son and his wife on their 1st Christmas together. However, I didn't do it in a room box, but in a gift bag. I found a bag with roses all over it nearly identical to the roses in her bouquet. It wasn't a very large bag but I managed to get everything in it I wanted to. It was just bit enough to hold a lace-covered rectangular table that I built up to the height I wanted to foam core--then covered with white felt, and then used pre-pleated lace for the sides, lace across the top and tiny lace trim to hide where the edges came together. On the table I had a wedding cake with flowers similar to their real wedding cake (the cake was different sized dowel rods glued together and covered with white Silicone caulk. The table also held a bottle of champagne, 2 Chrysnbon glasses tied with white silk ribbon bows on the stems, a reduced copy of their wedding program and a tiny wedding cake cookie tied in a cellophane bag (like their wedding favor). On the back wall of the gift bag I glued their invitation as a backdrop for the "receptiontable." On the floor on both sides of the table were wedding gifts. On the right wall was their framed wedding picture and the left wall, a framed sampler, mini-ized version of a larger one I made for their Christmas gift, also. I have a few pictures on my web site if you'd like to take a look at it: http://fayzerplace.homestead.com (go to "My Minis" , and then "Wedding Bag."

Fay in St. Louis


Transfer Medium: The Transfer medium you are looking for used to be called Frisket. I have used clear contact paper for the same kind of transfer, however, the most recent uses at my house were painting Mod Podge on the picture or object to be transferred, give 2 or 3 coats, drying between, cut out area you want to use with scissors, then soak in warm water until the paper part looks wet, then gently rub off the paper, leaving the transfer part (colored) let dry, trim as needed, then fix transfer to object. My mother did a lot of decoupage in her later years and this is the method she used. I just look at a picture and draw and paint what I want right on the object. (sure I know each of us has our own talents and one of mine is drawing and painting) You can also use thinned tacky glue if you can't get Mod Podge.

Rhoda from Whidbey Isl. WA. USA


Glue Tip: I use the Aleene's tacky glue and have several bottles that have thickened and just wont come out. It makes them impossible to pour. I use a glue syringe. I run some warm/hot water in the sink and sit the bottle down in it for a while and then you can pour it into the syringe with no problem.

Kim


Weldbond Glue: Weldbond is a white glue that dries clear and is available at home improvement stores such as Home Depot and at hardware stores such as True Value and Ace Hardware. It comes in a white plastic bottle with red writing.

Jennie in San Antonio TX


Weldbond Glue: Weldbond is a general purpose glue that can be thinned to lots of different consistencies to do lots of different things from gluing to glossing. It's very sturdy when dry-I used it on some picture frames that had to hold some weight-and it's holding up just fine. It's very runny (a little more so than Elmer's white glue) and it takes 24 hours to completely set. I have found that Aileen's Quik-n-Tacky works the best-it tacks up quickly, but not so quick that you can't jimmy pieces around, and it's not too runny. I found Weldbond at the art store in the drafting section (!why?)-and Quik-n-Tacky at Joann's-but I've seen it at every craft store.

Monika


Yes Glue: I do mostly quarter scale, and it doesn't take a lot to wallpaper a quarter scale house, so my glue does thicken on me. I find that when it does, after spreading with a credit card, lots of times it is almost dry by the time I start putting it on walls, and it doesn't stick as good. I just add a little water, mix it thoroughly and for me, it does a much better job. I hated to use it before I started thinning it.

Betty in Ky


Yes Glue: YES glue is actually a bookbinders paste. It is used to glue those sheets of sometimes fancy paper on the inside of the covers of hard cover books (among other things). One of its great attributes is that it doesn't cause paper to stretch or curl. Adding water can negate this feature. A really good tool for spreading YES paste is the auto body putty spreaders that are available in auto parts stores. We use them to spread the paste (just enough to make it look shiny or wet) and to smooth the wallpaper onto the wall to eliminate bubbles. YES paste also does not attack the copper wire as some wallpaper pastes will do. What I don't understand, is why Grandma Stover's takes a 4 fl. oz. jar, fills it with YES paste and sells it as 6 oz.

Tom Berkner


Chopper II: I have the Chopper II with the replaceable self-healing pad in the center and noticed this morning I needed to turn the pad one turn so that there was a new surface under the blade - and it would be the last time I could do that. HOWEVER...it dawned on me that if I cut a half inch strip from the pad (I used my scroll saw - you can follow the grid on the pad for this), place the pad back in the Chopper II but move it all the way over to the right (OR the left--whatever) then simply tuck/squeeze that cut strip into place, and, "Voila" --- you now have another new surface to cut on. I would think you could do this several times with that same pad, making sure the pad/cut sections are always flat. This will definitely extend the life of each pad.

Bonnie Soucek/Normal IL


New Glue: I just discovered a New Glue!! New to me anyway... Made by Loctite (there's a clue) Wood Worx. Comes in a tube like toothpaste. The caption says it's a new thicker formula... I think it's kind of thin, but they like it I guess. I've used it on books, fabric, wood/metal so far and I really like it. Claims to bond in 7 minutes and dry in 24. I find it grabs in a few seconds and sticks great while still making it possible to move the surfaces around slightly for a few seconds. Price at Lowes $2.95 tube. It's a bit opaque tan color when wet, Dries nearly clear. Water clean up for wet glue (as on paintbrush) Nail polish remover for dried glue. I rather like it. . I use a toothpick dabber and for really tiny glued spots this rather thin formula is neat, it holds good and seems a nice well behaved glue.Judie - Daytona Beach, FL


Previous 10 | Next 10


Page 449 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)