Reducing Barbie Patterns to 1/12th scale: To make a pattern for an 11 1/2" doll into our size, you just have to reduce it by 50% on a photocopier! Alice Zinn - Pt. St. Lucie - FL |
Patterns for clothes: A friend of mine mentioned to me one day (After laughing at me and my minis) that she noticed that the direction sheet in each pattern packet has a smaller version of each piece for the layout. Now maybe someone with some math skills and mini knowledge could determine just how much to copy and enlarge if need be for these to be for the one inch scale dolls. Marlene H Smith |
Rusticated wood: During a visit to George Washington's home at Mount Vernon, I spoke with a painter working on the property and he told me that the exterior was made of wooden boards that had been painted with white paint mixed with fine white VA. sand. Washington called it rusticated boards. The painter also said that in order to age exposed stone walls they painted them with butter milk which he said encouraged moss to grow, I tried the butter milk and nothing happened except it smelled bad for a time, Never tried the sand paint mixture but I don't see why it wouldn't make the wooden walls look like stone. Orrin |
Furniture finishing: Everyone that finishes furniture has their own way to do it. I have used a "Delta Ceramcoat" product called "Satin Interior Varnish" with good success. It comes in a 2 oz. bottle and is sold at craft stores & craft departments of larger stores. This won't break the budget & can be used over paint, too. Some of the varnishes sold where paint is sold are too heavy & "out of scale" for me. Ann Bramlet |
Finishing kits: Furniture finishing, full scale or in miniature, is a complicated and difficult craft to master. Lots of different situations. On your basswood kits try using a thinned clear (white) shellac as a sealer before staining. It evens out the color and keeps the end grain from getting too dark. Credit for this goes to Therese Bahl. If you use the Minwax stains, don't stir them, but just use the dyed liquid that stays on the surface. The solid pigments at the bottom get in the pores of the wood and can make your finish look speckled. Buy a piece of 1/16" bass wood, cut it into little squares and test all your finishes for color. Try oil based artist colors to use as a paste stain. Rub on, then rub off immediately. If you label your samples with the type of wood, the stain and the topcoat, you can start your own reference library. Shellac is the safest and easiest topcoat for beginners. Thin the clear (white) shellac in the can - 3 lb. with an equal quantity of denatured alcohol(1:1). This makes a 1.5 pound cut which is thin enough not to cause any problems. Brush it on. Wait four hours and rub down gently with 0000 steel wool. Make sure you get rid if all the steel filings before re-coating. Use three or more coats, "steelwooling" between coats. Use little pieces of new steel wool to get less filings to deal with. Cover with paste wax or even natural shoe polish. Clean your brush in denatured alcohol. The shellac, stain, steel wool and paste wax are available at any hardware store or home center. I have lots of wood finishing experience but try new things and learn a little more every time I finish a new piece. If you test first you will save lots of heartaches Pete Boorum |
Dirtying things up: if you water brown paint down and paint it onto wood it gives it a wonderful "dirty" look. I used this for the project I'm working on. I got a small (about 2" diameter) wooden bowl somewhere and beat it up, pounded it, giving it a nice crack, and then made it into a little fairy home. More watered brown paint on the base. Looks great so far. Rachel B of MD |
Victorian paint jobs: I believe the actual Victorians tended to use muted colors, and were also limited by what paints were available. Somewhere around the late 30's they were all painted white, and it wasn't until the 60's that people began to color them again. With the recent (now defunct) economic boom, lots of houses have been repainted and the city has never been so beautiful. Christine Sulewski |
I started staining the cedar shingles for my dh this morning. I am not one who cares to use much in the way of oil based stains or paints, so I tried mixing up a batch of my own using water based products. I made a stain "bath" using acrylic paints, faux finishing glaze, and water. Dipped a few shingles, patted off the excess and let them dry. Worked great! And, after every few batches of shingles, I added a little more paint to change the color just a bit, this way, all of the shingles won't be exactly the same color. Worked like a charm! Sloan |
Wood Stains: I use Carver Tripp Environmentally Responsible Super Poly in Gloss or Satin for a finish over the stain and on Miniature wood floors. I use the Carver Tripp Wood Stain for large and Miniature wood projects. It's all water clean up and very easy to use. I like this better then the Minwax. Carol Desmond, MA |
Paint Sealers: When I could only find the colors I wanted in a flat acrylic, I finished up with Anita's satin finish "poly". I bought it at Michael's. It comes in semi-gloss and gloss, but the satin leaves a glorious soft finish. Fannye in TX |
| Previous 10 | Next 10 Page 463 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |