Attaching Lamp Shades: To attach a lamp shade to a lamp, you have to buy or make a "harp", just like in real lamps. Take a look at the real lamps you have. Wire can be bent into the proper shape. A thin piece of metal or even cardstock with a tiny hole in it gets attached inside the shade. Slide the hole over the pointy part of the harp, using a tiny bead as a finial! Alice Zinn |
Tin Ceiling: There are two sources that I know of for tin ceiling products. JR enterprises - 3D reproductions 53 Case Road, Port Jarvis, NY 1277l makes a raised 3D type plastic panel "tin ceiling". The one I have is #TC 153GLD (gold) I know they also make it in white and in several widths & patterns. The other is Houseworks - Tin Ceiling #73l3 is small circles, Sheet size approximately 11x17. They also have 2 or 3 patterns. Houseworks phone # is l-800-24l-5818 Try your nearest Miniature shop first. They can probably order it for you. I have used both products. The directions say to install with double face carpet tape or silicone cement. I have used Bond 484 but Aleene's Super Tacky or liquid nails should work also. Check on a scrap for glue compatability with the plastic. Be sure to weigh it down if gluing. You might also check at your nearest Home Depot or Home Base type store or wallpaper store for textured ceiling paper. Ours here in CA carry several styles. All three of these products can be painted with acrylic paint with no problem. I used the plastic sheets for a ceiling in an old building (art gallery). I did have a problem with recessed lighting canisters. They got too hot (left it on too long for a mini display) and had some damage (melted close to the lights). Whoops! But for short term lighting I think they would have been OK. Or even regular light fixtures would have worked. Just not the spots. The tin ceiling is one of the focal points in the building everyone notices. Diane in SF Bay Area |
Measurements: I see postings once in a while asking what size a queen bed is, a bed spread, a kitchen counter, etc etc. Here's a handy hint for that (because I need the same answers all the time!). I keep an old JC Penney catalog, and several Lowes/Home Depot catalogs by my bench - everything has dimensions in the catalogs! In Penney’s or Sears you will find bedding, basic furniture, skirt lengths for dresses, etc. In the Home Depot stuff they have all the kitchen cabinet sizes, which is a life saver! Bev |
Glues: A real quick note on glues, try www.Marthastewart.com. You may have to sign in, but then Select 'Crafts', then 'Crafts 101', next 'All About Glues'. Hope this might help someone with glue questions. Rita-Montana |
Hanging Curtains: to hang your curtain rods, you can use mini cup hooks. I bought thin brass tubing at the hardware store to use for the rods, and they look fine with brass hooks. The hooks also come in silver color and sometimes (rarely in the teeny sizes) in white or colors. Rosemary in Cleveland |
Hanging Curtains: To hang curtain rods, you may wish to do as I have done. I had some extra crown molding left from doing the room so I cut two small strips off of it, about 1/4" or so, and drilled a small hole in it to put the curtain rod through. Now all I have to do is glue the brackets to the edge of the window frame. I don't have a picture of them up yet, but that should be coming in the next week or so, or as soon as I can find the right material for my rooms curtains. I will be making cafe curtains with small brass rings to hang onto the rod in my shop window. Dale |
Tinting glass: There is a way to tint glass that is fairly simple. Certain oil paints are transparent and when thinned down with a non-yellowing oil (linseed eventually yellows I think), or perhaps just turpentine, it can be used to tint the glass. It will wash off or rub off, but this technique was used in Victorian times to do reverse painting on glass. One of the colors I am pretty sure works is Rose Madder. That would give you the cranberry color. Sorry I can't be more exact - I am remembering a technique I did 20 years ago. Jacqui in Hilo, Hawai’i |
Modifying resin: After I am done with my carving work on resin figures (using a Dremel tool and small steel cutters), I lightly sand to smooth out the area as needed, then use acrylic paint to repaint or touch up the carved area. (which now looks white). I don't handle these much, so I have never sealed them, but you could easily spray them with matte sealer if you prefer. There are lots of resin figures for sale cheap around the various holidays - this is just one way you might be able to modify and use them at other times. Bonnie Gibson - Tucson, Arizona |
FAUX WINDOWS: Glaze your faux windows with "black mirror". Looks like glass because it is but looks like looking into the windows of a darkened house rather than like looking into a mirror. Black mirror is available at most glass and/or decorator shops. If the wood shell is 3/8" and you have access to a router, inset by 1/4". Better yet, If shell is 1/2", inset by 3/8". This avoids cutting through to the interior but helps prevent faux architecture from looking like overlays. Mel Koplin, Las Vegas |
Record Keeping: << . They did it all with a Video Camera. >> Oh, oops fellas, its Laurie raining on your parade...videos degrade after several years so need to be re-taped. And of course it's like a Xerox that has been copied...so not as good as the first. But, I'm sure it's fun to do. They also need to be stored so the tape is hanging on the sprockets and not on its sides. Then be sure it is stored in cool place like with wine. Heat ruins it. A paper back up record will most likely survive the longest. Laurie Sisson |
| Previous 10 | Next 10 Page 466 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |