Tea Shop: First of all, do whatever you think is beautiful. Remember that this is for your fun and enjoyment. But, when I read your description and the name of your shop, I had an immediate vision of what it looked like. I can't help with the outside as I have never done the outside of a miniature house or shop, but for the inside I have a couple ideas. FLOOR: I pictured a very lightly stained oak or pine floor with a couple small round rugs with a rose motif to place under your round tables. WALLS: I think some artwork on the walls always gives the miniature setting a sense of realism. How often have you seen a real room that doesn't have artwork? What about some small gold framed paintings of roses or teapots. I wouldn't do big pictures due to the size of your room, but groupings of small pictures. CEILING: This is my favorite idea. Because your theme is Under The Rose Bush, for the ceiling, I would first paint the ceiling a sky blue col or and lightly drybrush some clouds on it. (This is the fun part) Around the edges of the ceiling do a 1 inch border of lattice glued directly to the ceiling. I hope I'm making sense, if not email me and I'll try to do some sketches for you. This should give you an arbor effect on your ceiling with the sky showing in the middle. On the arbor you can do some trailing mini roses. In the middle of the sky area, hang your chandelier. Back to the walls, to tie them into the ceiling and create an illusion of the walls being bigger than they are, instead of crown molding at the top of the walls, use matching lattice work of about .5 inch at the top. That will make the walls and ceiling blend and you won't have a line to stop your eye from moving up to the sky. :-)

Dale


Dremel uses: I'm FAR from a Dremel pro, but I do get a reasonable amount of use out of mine. Here are some of the ways I use it and attachments/accessories necessary to do so: a.. With the drill press accessory, you can drill teensy things without worrying if you're going to drill your fingers, instead. b.. With the router accessory and appropriate router bits, you can make moldings and give furniture and other wooden items a nicely shaped edge (e.g., rounder, s-curve, ogee). c.. With carving bits, you can carve a whole lot faster,easier and, in my opinion, safer than you can using chisels on teensy pieces. d.. With the grinding wheels, you can smooth and remove burrs (sharp edges) from metal, and can trim down a piece of metal to size. The saw feature isn't very versatile. You use a cutting wheel to do it, so it will saw through tubes, for instance, but I wouldn't use it to cut anything of a length beyond that. Maybe t here is an accessory to use the Dremel as a table saw, but I don't know of it.

Rosemary in Cleveland


Dremel Uses: I use the router bits to groove the ceilings and walls for round wiring, before I paper and paint. I used the brown grinding stones to smooth the rough edges of newly cut slate for a conservatory floor. I use the shaper table attachment and a router bit to make moldings (cove and bead) for building furniture. I use the little drum sanders to sand window and door openings. My set of drill bits helps me drill wire sized holes in which to run electric wire. The drill press enables me to drill perpendicular holes for dowels and also becomes a small stationary disc sander. There is also a 90 degree drill attachment that allows me to drill in small places. The two other tools that I find invaluable in the shop are a scroll saw and a small belt/disc sander. I have used the sander, for example, to sand bricks (the real kind that come on a sheet) after cutting to create smoother edges. The scroll saw cuts plastic and wood for furniture and accessories. Hmmm...that's all I could come up with quickly.. Have fun and practice, practice and practice. And remember all that safety stuff. The Dremel engraving bit (that was not securely tightened in place) is still embedded in the ceiling of my workshop (12 foot ceilings too). I was engraving a design into slate for a tiny shop sign when it spun off. I left it there to remember where to point that thing :)

Sharon Blake


Jenny Dahl (April Showers) was a dealer at the show (a first for her) and her cloisonné flowers are really wonderful. These are not dipped, people. She paints the glue mixture on each leaf and petal, and then paints it with acrylics. Unbelievable. I think she will be applying to teach her apple tree at Castine next year.

Jenny's website: http://www.miniflowers.com

Debbie Burville (Montacute Miniatures) was there with her ceramics. I especially admired some Della Robia style fruit bowls.

Debbie's site: http://members. home.net/montacute/

LadyBug (Sue Thwaite) was there in top form, telling her stories and demonstrating techniques and products. Sue's site: http://ladybug-fairies.com

Jean and John Day were there - and Jean is a charming, warm person who is always smiling. Jean's site (her wonderful photo albums are there) is at http://jdayminis.com

Debi Kolenchuk (Embraceables) was there with her friend Linda. It is always good to see her. Debi's site is http://www.embraceables.com

Vicki Horiuchi was there -- the new kid on the block. She brought samples of her work and several wholesalers were very interested. Vicki's site: http://www.SmallerAndBetterThings.com

Jim and Carol Olinger, owners of Country Store Miniatures in Vancouver, Washington. Their site: http://www.CountryStoreMiniatures.com

Pat Boldt Dolls - http://www.patboldtdolls.com

Anne Gerdes


Beginners: what to start with - This is my humble opinion: begin with a room box or room scene of something that you enjoy or recreate a special childhood memory. I love dolls and costumes, so one of my first projects was a miniature Victorian dress and hat shop. It won a blue ribbon at a Miniature show in Louisville, KY. I also collect mini teddy bears, so I did a Teddy Bear House. I have a miniature doll shop with about 300 dolls in it, and a bride's bedroom with the bride getting ready for the wedding. You might want to recreate your mother's kitchen from when you were a child, or do a favorite Christmas morning scene.

One problem is, we all have more ideas than time to do the things. You can always progress to a whole dollhouse later. I found that I'm not so hot at building and construction, and I didn't enjoy doing every room in a house, so I gave up after doing one whole house. Now I've inherited my Mom's wonderful dollhouse, so I end up with a nice big one anyway. Have fun, that's the best advice.

Paulette in Indiana


Beginners: what to start with - You will probably get may different opinions, all of which are correct. Really it depends on you.

Are you into various crafts, do you enjoy "decorating" your own home, enjoy the "Martha Stewart" fun, like building things from scratch, or following some plans, do you have access to woodworking tools, ie: saws, sanders, etc, or a helpful soul to help with from scratch house building, or would you rather take on "kits", and follow others directions.

Do you like to "adapt" your own ideas or content to follow. Of course if you are just into the decorating, you can buy a completed house, ready for furnishings & accessories, and just concentrate on the interior, by making kits, or buying some items completed and ready for their new home. Whichever way you go, relax and have fun. Attend any shows in your area (we will go to any show within a 100 mile radius), attend any classes or workshops available to you (you will learn lots of skills and meet lots of WONDERFUL people. Workshops are usually one day events. Often times a "roombox", so you can start small and work up. And of course join a club if one is available, and continue to read SS Digest for the best of all mini worlds.

Also if you have Miniature Shop (s) within driving distance be sure to check them out also.

Diane in SF Bay Area


Beginners: what to start with - My mini club group has finished a project using insulation foam board we bought at Home Depot or Lowes, it is sold in 4' x 8' sheets and used in full size house construction. It is blue in color if you buy it at Home Depot and pink if you get it at Lowes, they are different brands but the same thing. (They will cut it for you if you can't get it in your car, I have them cut it in half or thirds. )

You can cut it with a box knife, it is a little over 1/2" thick. We have made buildings out of it and are currently building an apartment complex with it. Just substitute it for wood. Glue it together with white glue and reinforce the joins with toothpicks for stability. Prior to construction you must peel the protective film off the surface before gluing or finishing.

You can apply paint to the surface, glue wood strip to it, wallpaper, stucco with caulk or any of the finishes you would apply to wood or foamcore/foamboard. It is so easy to work with and surprisingly sturdy.

You may want to start out with a roombox, to get your feet wet so to speak. You could make it as big or as small as you wish or the same dimensions as a standard picture frame, an 11 x 14 say, then it would have a lovely finished front.

I used round wire for the electrification of my tea shop, just sliced a small groove in the appropriate wall, floor or ceiling to make the wire runs, these grooves are covered by the flooring, wall finish, etc.

Susan in Texas


Wedding scene: Make the punch bowl from one of those vending machine prize egg tops. Use some filigree bead caps for the base if you have some around, or a button disguised with greenery and flowers. For goblets, check Michaels, Hobby Lobby or wherever for clear pony beads and hourglass-shaped silver or gold bead spacers. Glue together for instant wine glasses. The craft shop may even have different shaped clear beads that would be more like champagne flutes, or Helen Ruthberg's books suggest emptying out vitamin or Contac capsules, spraying them with clear acrylic, and gluing to bugle bead stems and hole-punched bubblepack bases. With the price of drugs nowadays that might be a little prohibitive though! Landscaping -- look around outside (or send the kids on a mission) and see what survived the winter. Last weekend weather was finally nice so I started cleaning up the yard for spring. Found some dried oregano and live-forever flower heads to spray-paint and use for minis!

Loretta. Sniarowski


Dental Office: My grandfather had such a glass jar in each dental chair area. Besides the required bathroom in his office, he also had a small nook where ladies could check their makeup, before going out into the waiting room. This nook contained an ornate mirror and console, a chair, and tissues. His waiting room always had "Highlights" magazines for kids, several copies of a nearby high school's year book (I never could figure that one out!), besides the normal outdated magazines. There was a corn plant, that despite my "Papaw"'s wonderful gardening talent, always seemed rather sun deprived, and scrawny, like other dentists' offices.

You could also put tiny sunglasses in the chair areas for children to wear while being examined, like some dentists do now. A box could be placed behind the receptionist's desk with tiny prizes for good children.

Beabe Thompson


Australian minis?

- A boomerang?A mini akubra hat or drizabone coat?(good luck on these -- our own wonderful Trace ended up making these for me). . .

- Some of the mini furniture is different -- a miner's couch

- How about an Australian flag? These are easy and cheap to find -- mini toothpicks with flags used for HDs.

- A mini bucket with billy tea? Mini lamington cakes?Parakeets or budgies, a koala or platypus?

Kathy in TX


Previous 10 | Next 10


Page 474 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)