Hairstylist scene: You know the sanitizer jars full of combs that are supposed to be on the counter, well how about using a clear glass jar, carve the combs from wood and paint, then fill with resin. Or, those carts on rollers that are used to hold all the perm rods....make one out of Q-tip sticks (remove the cotton) and those little jelly containers you get from restaurants. Use beads to look like the wheels. A hair dryer chair could be made from a basic chair kit (you know what style) and the dryer hood could be made from half of a small, plastic Easter egg. Don't forget the black rubber mat on the floor under the stylist chair (the one used to make standing all day a little easier on the old dogs). Use cardstock painted black and sealed with a matte finish. Sloan |
How about Sleeping Beauty's castle? Could use one of the Dickens Village/David Winter type small resin castles, perched on a "sodded" floral foam hill for false perspective. In the foreground go crazy landscaping with wild flowers and all the brambles that have grown up around the kingdom while everyone sleeps. Sleeping Beauty is also called Briar Rose, so you could use lots of blooming roses in the bramble patch. Make a path that ends abruptly at the brambles -- or maybe show a narrow passage chopped between the brambles. Leave a horseshoe on the path and torn fabric scraps stuck on the brambles beside the passage to indicate that a slightly disheveled Prince Charming is on his way. Loretta.Sniarowski |
Mother's day project: A lot of times I have taken a simple idea of what someone likes most, and built on that. What does your mother like to do? Is she a gardener, a needleworker, a golfer, avid outdoorist, tea drinker? My mom is insistent on grandchildren (married but childless couples here may know what kind of insistence I mean...) so I made her one in miniature. I followed a very simple pattern (from an old Dollhouse Miniatures project) for a nursery made out of an embroidery hoop, a piece of foam core, lace, paint, some posterboard and some wallpaper I had left over. I added some furniture, tea and cookies, a dog (Chihuahua, model of her current dog) some greenery and a little dressed baby (all in a pink knitted outfit, used one of those anatomically correct dolls -- she even had a little blanket to carry around. I believe I had dated it using a little needlework sampler. To see what I did, go to http://www.bulback.com/personal/kim and I think it is under "finished projects". I don't think this project took me more than a week and a half totaled to make, so it is relatively quick. It also won first prize at a fair last year, and my mom intends on taking it to others next year, so yes, she likes it and is quite proud of it;). Kim From Canada |
Mother's day project: Just sit down and think about what she likes -- favorite colors, music, pets, fancy cooking or baking (vs. every-day chore cooking), gardening, or any kind of needlework, bingo, or cards? What is she proudest of accomplishing in her life? What do you admire about her most? Does she have any unfulfilled dreams? How many children/grands/great-grands does she have? Once you've "interviewed" yourself and written down some of these ideas, you'll have a list to work from. Then use a few pieces of DIY or ready-made furniture (table and chair, maybe) and add accessories to remind her of the things that mean something special. Examples: Copy and reduce family pictures to frame and hang. Clip, frame and hang pictures if she likes art. Roll some balls of single-strand yarn, put in a basket, stick pins into one for knitting, etc. Also, once you get a list, use Dogpile or Google or another search engine, type in one of your categories (say, she likes Van Gogh -- type in Van Gogh) and see what kind of printables you come up with. Loretta.Sniarowski |
Metlan: I submit that the finest wallpaper paste ever made is Metlan, a powder in a small box you should be able to get at any good hardware or wallpaper store. I've used it for years. I once covered a (full-size!) refrigerator w/printed tissue wrapping-paper. ( Tissue is at least as good as fabric for covering odd-shaped or curved surfaces.) Metlan doesn't have to be sifted into the water as many pastes do; it never lumps. I've kept the mixed paste covered in the fridge for weeks on end & it's never lost its sticking power; you can endlessly re-position wallpaper & it doesn't grab. I have found no flaw in it. It comes in at least two, probably more, types; the two I've used are "for medium weight wallpapers" and "for delicate fabric & grasscloth". The latter is the one I put the tissue on with. The person who first told me about it 25 or so years ago said he'd papered a room w/newspaper comic pages, and that only with Metlan did the print on the back not show through. Hilda |
Dust vacuum: you can make a dust vacuum for your saw with either pvc piping or with an extra vacuum hose from a vacuum shop. Tape the hose just above and behind where the cutting blade is, barely out of the way of the cutting action, and bring it around to a portable floor vacuum. It does not take much power. You could also abandon the little blower. Between the two you should be able to eliminate about 90% of the mess. Barb Jones |
Scroll Saw Vacuum: A lot depends on the setup for your scroll saw. Most of my tools have a hole somewhere in the casing to which a vacuum can be attached. I have a mini shop vac that I hook up and turn on when I use my tools and that works fairly well (but doesn't catch everything). There are adapters, if the vacuum tube is too small for the tool. Some are the size for a regular shop vac - which works even better if you have one. They are noisy though. Jacqui |
Jeweler's Saws: They are a wonderful tool - I use one constantly for cutting out fine wood detail. You have a lot more control than with a Micro-lux or scroll saw, although it's much slower. And, naturally, you can use it on metal too, so you can make all sorts of custom hinges, hardware, etc. But PLEASE BE CAREFUL! Although it looks like a smaller version of a hacksaw, and the thin, almost hair like blades look pretty harmless, they can do some hurting without some basic rules! Blades come in many sizes. They break easily, too. When you buy them, get an assortment of sizes and at least a dozen of each size you choose. The courser blades will cut quicker, but not as finely. The finest will take forever, but you will be able to get fine detail and have almost no sanding to do. Different kinds of wood work best with different blades - it's mostly try and see. The blades have teeth that must point down when in the saw. Some sizes you can't see the teeth. I gently (and VERY slowly) rub my thumbnail down the blade before installing it to make sure I have the teeth going the right direction. The tension must be proper for it to even work. Insert your blade into the top thumb screw and tighten. Then I usually brace the handle against my chest and the top of the saw frame against my bench, and squeeze until the blade is in the bottom clamp of the frame. Tighten the bottom clamp and slowly release. Now "pluck" the blade - it should give a nice "ping" sound, but have a little give. If it has a dull tone, or can be wobbled 1/2" or more, open the bottom clamp, squeeze and re-insert. If your "ping" is too high and there is no give, loosen the blade - first cut and it will break. It's a great idea to wear safety goggles when using a jeweler's saw. I used to be a jeweler, and when learning the craft, I had a blade just disintegrate on me - ended up with a section in my pointer finger. And they are one directional, like a fishhook. Not fun to pull out. Pieces of blade can go flying when they break, and eyes need to be protected. The blades do wear out - if it's not cutting like it was 15 minutes ago, throw it out and use a new one. They will break - it's the nature of them. If they get stuck in your wood, gently try a sawing motion while backing up, but if you can't move the blade, release it from the saw frame and it should pull out easily. If you are cutting metal or plastic, lubing the blade with beeswax can make the cutting easier. Bev |
Windows & Window Treatments: GREASED PAPER FOR WINDOWS: Log Cabin Windows For greased paper windows like the pioneers used, I would suggest you use mineral oil for "grease". Salad oil, lard or bacon fat would attract mice and bugs. Mineral oil has no food value and will not decompose and turn rancid. It is also great for oiling wood cutting boards or anything that is used for cutting or preparing food. I don't know what paper would be best to use, but your suggestion for using paper with high rag content would probably be the best. Caroline Bradley |
To simulate the "grease paper" on the log cabin windows, waxed paper would work well. Take some yellow glass paint (or amber for darker color) and smear it on waxed paper with your finger. Also an amber wood stain (very lightly) works good on the waxed paper too. This will give it a very nice tint and looks great when held up to the light. The view through the window is still somewhat visible. Brooke, Wa |
| Previous 10 | Next 10 Page 478 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |