Hanging curtain rods: For curtain rods, I buy the smallest screw eyes I can find in the hardware or craft store, drill a starting hole with my pin vice and a drill smaller than the screw, then thread the rod through and put on bead ends. To make removable, just glue on one bead. I use bamboo skewers for curtain rods. They are small enough and cheap to buy. I get the smallest size I can find. They also are great for small bits of glue and small dot paintings of flowers and leaves. For leaves, just make a dot then drag the tip away in a curve for the stem. I do a lot of mini furniture in folk style. Rhoda |
Mini velvet curtains: Budget: Go to a fabric store (preferably a discount store) and look for the cheapest, thinnest knit velvet you can find. It might be marked as panne velvet (crushed velvet), but often it is not crushed at all. You can use stretch velvet if it is thin enough, but stretch knit velvet is often thicker than non-stretch knit velvet. Another option is the wide short-nap flocked velvet ribbon sold for holiday decorations, although it doesn't come in as many colours. Non-budget: Silk/rayon velvet (priciest) or thin cotton velveteen will also work. The silk/rayon has a longer nap, but it drapes better. The velveteen nap is more to scale. How-to Tips: Since you can't use draping medium on velvet, since it ruins the visual texture as well as the feel, you will need to wire them or sew them to a rigid base, like canvas, before mounting them. When I made miniature velvet curtains for my old Victorian house (this was years ago), I sewed them carefully into drapey folds and then hung them. Unfortunately I don't recall how I hung them, and the house is long gone (sold to the family that bought my childhood home, as their daughter fell in love with it when she saw it, and I was heading for college). These days I mostly use velvet for doll's clothes. Maura Bass |
Velvet Drapes: cotton velveteen works very well! (To make them fold as you would like, see my recent tip on lining them with heavy duty aluminum foil). Alice Zinn-Pt. St. Lucie FL |
Velvet Curtains: I too wanted velvet curtains for my Victorian drapes. I needed very specific colors though and ended up purchasing silk velvet for the valances, since I couldn't find the antique gold in the less expensive stuff. Serena Johnson made my drapes - she also supplied the chocolate brown velvet. I wouldn't shy away from velvet if that is what you really want to use. Kathy in TX |
Shutters: You might try making some out of the sticks they use for Popsicles. They sell them in craft stores. Measure your windows vertically and cut 3 strips in the appropriate size, for each shutter. Then cut two back braces, glue the strips to them and attach the shutters to the side of the house beside each window. You could add a tiny wooden cutout for an accent trim. Naturally, you paint them before attaching them! Betti from LA |
Shutters: They can be made by putting thin strips of wood around "louvers" made from the corrugated cardboard that holds new light bulbs. Paint the whole thing white and there you go! Alice Zinn- Pt. St. Lucie FL |
SHUTTERS: Very nice and easy shutters can be made with common Northeastern sheets of "clapboard siding". The 3/32" or 1/8" clapboard patterns are intended as siding for models in smaller scales. Used on 1" scale houses, the "claps" would represent louvers of 1 1/2" or 2". Make frames with common basswood and insert the "louvers". Small scale clapboard can also represent louvers on attic vents or even mini blinds on "non-windows" in room settings. Mel Koplin |
Shutters for the carpentry challenged: Have you tried using matboard? It's really easy to cut with a craft knife, and it comes in lots of colours. You can paint it, too, and mark " plank lines" on it with a dead ballpoint pen. Kay in Ottawa |
Scale windows: I made the open/close windows for my Newport dh. I went to the hobby store where they have the large cardboard box of different sizes of balsa wood. It is a large tall box with sections. Each section has strips of different sized wood in it. First figure out what sizes you will need and then you can buy the strips at perhaps 3 feet long by 1/16" or 3 feet long by 2/32". Make a jig for cutting the pieces to the exact length each and cut all of them. Then assemble into window frames. I use the Butyrate sheets found at http://www.micromark.com for the "glass Barbara D |
PLASTIC vs GLASS WINDOWS: Certainly a decision with advocates on both sides. Hope I don't rankle feathers (these are OPINIONS and only MY opinions at that). Plastic materials work with most manufactured windows frames/sashes. The plastic is easy and safe to work with. It will dull and probably discolor with time. You must be extremely careful when cleaning these windows to minimize accumulated microscopic scratches which eventually dull/fog the windows. Most plastics become fragile with age and exposure to sunlight. NET ASSESSMENT: Fine for a personal, play dollhouse. Less desirable as a choice for what you hope will become a family heirloom to be kept for generations to come. Glass windows are harder and glossier, less vulnerable to maintenance damage, discolor only with GREAT age and then to very charming blue and green tints (vs. browns and yellows for plastics). There is a safety concern working with glass but, with care, it is easy to cut, widely available, and inexpensive. You will probably have to make your own frames/sashes but this is not such a terribly difficult project and it gives you a lot more freedom than being limited by "available offerings" of size and style. There is no need to use specialized (expensive) "thin" glass for windows if the edges are not visible. Blackening the edges of cut glass before assembling into sashes will perfectly hide even the most outlandish thickness from detection. If I ever get a day off to get back to my miniatures, I plan to assemble a booklet for easy to build windows using 1/16" "picture frame" - single strength glass. Until then - here goes for a kwikee verbal on double hung sashes. Cut 1/32" thick stripwood for the vertical portions of the frame. Two (1.32" thick) should be full length (i.e., top to bottom of BOTH the upper and lower sash). These will be the interior frames of the upper sash and exterior frame of lower. Cut and fit horizontal members at top, bottom and middle. Use 1/16 X 1/16 stripwood for the following edging. On one side of the rectangle built so far, consider the face you are looking at as the "exterior". Strip across the top edge of the top horizontal (all the way - extend to also cross top edge of vertical members) Strip across bottom edge of MIDDLE horizontal. Flip your frame over to look at the "interior". Strip across the bottom edge of the bottom horizontal and top edge of middle horizontal. Now you have a place to set glass between the 1/16 X 1/16 pieces. Cut glass to fit both exterior and interior boundaries (almost all the way out to edges of vertical members). Paint the glass edges with flat black enamel. Set into place and attach with a couple tiny spots of super glue. Cut and attach 1/32" thick vertical members for external top sash and internal bottom sash. Likewise, cut and attach 4 horizontal members. This is a very simplified description for a basic double hung sash but I hope it conveys the basic idea. Make a couple "basics" to get familiar with the idea and then start looking at how you can "complicate the issue" with decorative milled edges on the wood and such. These windows are easiest to build in an assembly frame of scrap wood the size and shape of the opening they will fill. I suggest painting the wood inside and out before actually placing the glass. NOTE: Some sources of glass have single strength which is slightly larger than 1/16" thick. Measure closely before buying. Likewise, make sure the 1/16 X 1/16 wood is AT LEAST as thick as the glass and preferably a few 1/000ths thicker. Mel Koplin, LV |
| Previous 10 | Next 10 Page 479 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |