| Parquet floor squares: I have seen regular parquet floor tiles in 9" and 12" sizes. Usually 9", so that would be 3/4" for minis. The strips of wood for the parquet pieces would probably be about 1/8" with 6 strips/tile. Jacqui in Hilo, Hawaii |
| Parquet floor squares: I made a parquet floor for my living room and used blocks of 48 mm. This was for a floor with a mozaik-motif called Versailles Etoiles. In real life the blocks are 50cmx50 cm. Marina |
| Parquet floor squares: The ones I've seen done are 1 inch squares to correspond to l foot "real-size" squares. I expect this is not engraved in stone as parquet comes in many patterns and arrangements and I would think it would be essentially whatever size you want it. SUSAN AT THE WHITE RABBIT'S HOUSE |
| Parquet floor squares: I have a parquet floor in my sunroom - the real sunroom not a mini one and they measure 6" x 6" so I would imagine in mini talk that would be 1/2" x 1/2". Vi in Hamilton |
| Floor template:If you use a thin brown wrapping paper you can fit it inside your rooms to make a template. With oddly shaped rooms you can use torn paper with the straight edges lined against the walls and overlap the torn edges, taping them together. It is then quite easy to do your flooring on the paper and slide it in. Jacqui in Hilo, Hawaii |
Wiring: I cannot stand it any longer. If you are going to use any lights that are not in a 12 volt system, such as night light bulbs (7 watt), or the 15 watt ones mentioned, these go directly to your 110 volt house wiring and they get HOT. Be sure you have vent holes up high in the dollhouse or room box or you will be very unhappy in the near future. My hardware store sells something called a "closet vent" with louvers that comes in many diameters, but the 1" diameter one fits in a 1" round hole, and up high under the eaves of a dollhouse looks just great. It provides the venting you would need very nicely. It can also be used up high on the back wall of a room box. It comes painted white, but you can change that. I know of many a miniaturist who has had disastrous results with tape wiring, I have always taught "round" or hard wiring, but I have never used Tom's insertion tool. If you are going to use tape, please buy his tool so your lights continue to light for a long time. My favorite story is of the lady who used tape wiring, then wallpapered, then trimmed the wallpaper at the ceiling with an X- Acto knife. Yep, slit right through the tape as well. Of course, that was not the tape's fault! Barb Jones |
Dealing with Spills: three of the best tricks that I have found are: 1. use rubbing alcohol to take acrylic paint off clothes. I have just rejuvenated three sweat shirts that have had paint on them for years. they now look like new. 2. vinegar is great for dissolving glue. don't think it works on the polymer glues, but for Tackie and Sobo and wood glues it works great. 3. use a butler gum stimulator found in the dental aisle for removing excess glue. I use it all the time on the 144" scale houses that I am making. Gracia in California |
Bending Plexiglass: In my own case I did use my oven and ended up with 250 degrees F - 15 to 20 minutes and just kept watching till it seemed to sag. I had placed on sheet of alum. foil and removed wearing heavy cooking gloves, and bent over my form for 2 sided front on gift box display. My bend was a soft curve, which was what I was after. As plan on having the 2 box sides -glued together to box top, protect it when I want to store. Regina, Wilmington, DE |
Washington Dollhouse Museum: This is to those making inquiries regarding the Washington Dollhouse Museum, it is located at 5236 44th Street, NW, Washington, DC. The phone number is (202) 244-0024. The full name is actually Washington Dollhouse Toy Museum. Lorri in Manassas, VA |
MINIATURES SEARCH ENGINE http://www.myminiatures.com/ Brooke, WA |
| Previous 10 | Next 10 Page 487 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |