Paper Flowers: You are correct; the paper flowers do fade over time. My pot of geraniums made from a kit were originally red and were later light red, almost pink. I carefully painted them with craft paints, diluted slightly, and they looked better. It would have been better to paint them before construction, though!

Joie from Emerald Isle


Plant Making Sites: Betty here are some site that offer how-to's on making plants: http://kuoi.asui.uidaho.edu/~nyssa/projects/gladiolus/ http://kuoi.asui.uidaho.edu/~nyssa/projects/pansies/ http://www.geocities.com/Heartland/Shores/1928/projects/callalilies.html http://cottonridge.safeshopper.com/225/cat225.htm?456 http://www.dollshouseworld.com/articledhw.asp?artid=161&cat=Projects&pre=1 http://www.dollshouseworld.com/articledhw.asp?artid=1029&cat=Projects&pre=1 http://www.geocities.com/heartland/woods/5223/flowerinst.html

Peaches In Daytona Beach FL


Gardening Book: I've been playing around with this since I bought the book "Making Miniature Gardens" by Frieda Gray. The book is a great how-to guide for flowers! Really worth every penny and priced right at about $20. I picked mine up at the KC show, but you can order it locally from just about any book store, or on line at a site like Amazon. There are also some great sites on the net with instructions.

Sloan


Wrought Iron Gates: I thought I'd share with all of you who are talking about wrought iron gates, staircases etc. how my creative friend Lorraine made a pair of awesome wrought iron gates for a room box she did. First she sketched out what she wanted them to look like. She used wood for the upright pieces. In her gates there were several heart shaped designs. She made herself a 'jig' out of toothpicks set into holes she drilled in a heart shape in a piece of wood. Then she bent wire into as many hearts as she needed. The vertical twisted lines were made from twist ties. She glued the whole design together with Super Glue gel, (I believe) and let it dry. Then she spray painted the whole thing with a matte black spray paint. You'd never know they were not metal!

Alice Zinn


Chrysnbon Plates: About using the reducing method and patterns from the china-replacement site, I left out a couple of things that might help. I used the luncheon-sized plates.

For my project, I reduced the images I obtained from the china-replacement site. The one thing that made it easy for me was that my china is made by Nikko in the Christmas pattern and has a tree in the center of the plate with no pattern on the rim. After getting the proper reduction and printing on photo paper, all I had to do was use a round hole punch to cut out the tree, glue it to the center of the plate and put a final coat of nail polish on to give it a shiny china look.

It also helps to put down a strip of double-sided tape and set the plates on it while working on them. That way they won't slip and slide away from you.

Dolores


Paper Roses: I think we need to ask flower makers what kind of paper they are using before we make our purchases. So I asked, being the shy type...the answer is painted rice paper. The paint keeps it from fading and the rice paper stretches a bit WITHOUT dampening when you form the petal with the stylus.

Laurie Sisson


Topiary: For the stem of the topiary I used a dowel. I took small piece of Styrofoam and glued that in the pot and then glued the dowel in the Styrofoam and covered it with Spanish moss. All secure!!

Marsha, Newark, CA


Topiary: Suzy wanted to know how to anchor topiary tree armatures in the planters. This can be done by using Crayola Model Magic, paper mache, plaster of Paris, or regular air-drying clay. When the topiary trees are finished, paint the top of whatever you use to anchor the trees in the pots with brown paint and, when dry, glue dried coffee grounds or dried tea leaves on for dirt. Hope this helps.

Mary in MS


Topiary: This is where I really love paper clay, because it air dries. I put glue on the inside of a pot, stuff it with paper clay, spread glue around the top, stick my plants, wire frame, whatever, through the paper clay, and then spread model railroad 'dirt' on top of the white clay. It seems to hold whatever I have stuck through it without any muss or fuss.

Kaye in LA


Topiary: I made a whole bunch of topiary trees for a swap last month. I bought wooden plant pots in the craft department at Wal Mart and I painted them with terra cotta paint so that they would look like clay pots. While the paint dried I went out to my grape arbor and cut little "trunks" for my trees. I made my trees by gluing foam greenery onto little Styrofoam balls that I had glued the trunks into. When they were all finished I filled the pots with caulk, sprinkled greenery on it and stuck the trunk into the caulk. It takes a long time for the caulk to set up but that wasn't a problem because the trees were already done and I didn't have to mess with them while they were drying. I found that spices from my spice rack also look great as "ground cover" and "foliage". Well, there you go. Another way to make topiary trees stay in their pots.

Mary Lou from Florida


Previous 10 | Next 10


Page 490 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)