Precut paper flowers: Diane - for paper petals try Hanky Panky Crafts at http://www.hankypankycrafts.com/ Mary in Minneapolis |
Lighting Wiring To Wire or Not: Before you decide you might like checking out Tom's web site, he makes it look easy. http://www.dollhouse-miniatures.com/toms-tips/electical.html Kathy |
To Wire or Not: No! Please don't skip the electricity! Take it from another beginner. It is not really that difficult. I'm busy with my first house now. Its only half finished, but it looks lovely, especially at night, when you switch those little lights on. Everything just comes to life. I can't imagine my house being without lights. I did it without any help. We have no mini clubs or shops here, so I had no-one to ask. I used the Cir-Kits booklet. I must add, I did my wiring with copper tape, not actual wires. The tape method really is very easy. Just read the book before you start, draw up a plan of your house (walls and floors), decide where you want your lights and how many. Then you draw pencil lines in your house where you want the tape run, and stick your tape on that line. Make sure that your connections work every time you punch in your brass brads, and you can't go wrong. You really don't have to be an electrician to do it. If I can do it, so can you. My husband still can't believe that my lights are actually working! And.....NOTHING beats that feeling when you turn on the power for the first time! Betsie, Western Cape, South Africa |
Wiring Ornamotors: you could hang the ornamotor in the flue and just wire a resistor in series between it and your 12 volt dollhouse transformer. What size resistor I am not sure, or possibly you'd need a power resistor, and the size would determine the speed of the ornamotor. What a clever idea you have. I don't know what kind of bearings are in the ornamotor, so don't know how long it would last if used on its side. Resistors do give off heat (that power has to go somewhere), so make allowances for that (open flue, for example). Barb Jones |
Round Wire Vs. Tape: The owner of the dollhouse shop where I purchased my dollhouse, five years ago, persuaded me to use the round wire method. He claimed it was more reliable than the tape wire. This may no longer be true as the product has improved. I still prefer the round wire because I feel future repairs should be easier. I just made channels (with an electric drill) in the upper floors and a hole in the middle of the floors for the ceiling fixtures for the lower floor rooms. I have easy access to these wires just by lifting the carpets that hide them. The wires then run along the edge of the floors and walls down the open back to reach the transformer. I have explained in an earlier post how they can be hidden by L or U shaped strips of wood. Tape wire is hidden by wallpaper. From what I've heard you (1) would have to remove the wallpaper to repair it (ugh) (2) be careful what wallpaper paste you use as it can react with the metal (3) can short-circuit the whole system as it is all interconnected. However, it must have some advantages as it is very popular. Perhaps someone else can elaborate on this. Harriett- Framingham, MA |
Round Wire Vs. Tape: I agree with Harriet that the round wire method is more reliable. In my opinion it is also easier, once you understand one basic concept. I know it is faster. I used to teach dollhouse wiring for many years in a miniature store. In the beginning I taught both round wiring and tape wiring, but my students all preferred round wire in the end, so I just taught that after awhile. A tape system seems easier because you have these two pieces of copper tape, side by side, going all over the dollhouse. If in round wiring you use 2 wires of different colors and pretend one is one piece of tape and the other round wire of the other color is the other piece of tape, you cannot miss. The other way I present it, is if you never connect the two different colors of wire together you won't have a short circuit. There is a fairly clear video on "Wiring your Dollhouse" put out by Mindstorm, and I believe they have some left. Barb Jones |
Round wire vs. Tape wire: Which is more reliable? You tell me, is a piece of round copper anymore reliable than a piece of flat copper? (keep in mind that most of the wiring in satellites, where it can't be repaired, is printed circuit boards which are flat copper) Speed? I charge $49 labor to tape wire a 7 room house, I charge $140 to round wire that same house based on the time it takes. With round wire you have to mark the walls for me, where you want every outlet (receptacle) and sconce, as well as the exact location of every ceiling light. With tape wire, you can forever continue to add outlets along any wall without rewiring or destroying your decoration (even through wainscoting). Between myself, and the students in my wiring classes, we have wired literally thousands of houses (19 last month alone) with tape wire. The average student takes 2 1/2 hours to tape wire a 10 room house (like my Dover). If you are concerned about connections, you can solder tape wire. I have previously discussed the methods of making connections, and explained how you can make a reliable mechanical (eyelet) connection without having to resort to soldering, which is a real turn-off to most miniaturists. Suffice it to say, since we have invented our insertion tool (several years ago) we have eliminated problems with mechanical connections (in fact, I have more problems with solder joints on the printed circuit boards I use for flashing lights). Tape wire vs. round wire: it's like religion, everybody has their favorite. Tom Berkner |
Tape Wiring: I use tape wire and generally only wire the ceilings so I place my tape wire on the floor above to wire the ceiling below. Should I need to fix it for any reason I simply remove the carpet. If you are going to use wall outlets you could probably put your tape wire behind the baseboard and not permanently attached the baseboard for easy removal should you need to get to it. I have used wall sconces and yes the wallpaper does cover up the tape wire - but knock on wood - I have not had any problems where I needed to fix any of the wiring. Marsha, Newark, CA |
Painting over Tape Wire: o, you can't just paint over tape wire and have it look good. I apply a very thin coat of spackling compound to the wall before I paint it. This just covers the tape wire so it seems to disappear. Tom Berkner |
How High to Hang a Chandelier: Being a 6' 4" guy, I have this problem with low doors and low-hanging lights. My advice, therefore, is: don't hang it too low! If you have a 13" high ceiling and a 3 ½" tall (scale) fixture, I'd let it hang down 18" so that the bottom of the fixture hangs at about 8" height. Another consideration is how high will people look at this room - will they be looking straight on, down a little or will they be looking up when most people view it? If they'll be looking down, I'd 'cheat' just a little on how low it hangs (shortening its chain) so that it isn't in the way of seeing all your beautiful plants and furniture. In truth, many of the old homes with chandeliers suspended them with ropes attached to pulleys. They lowered them down to light and then raised them back to whatever height the owner of the home preferred. If you're going for an authentic pre-electricity look, you might want to add the rope and pulley system for realism. So… my conclusion is, make it high enough not to bang any- one's head (even miniature people's) and raise it enough so that it doesn't obscure the view of the room as a whole. George Held |
| Previous 10 | Next 10 Page 491 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |