Porcelain Blanks for China Painting: We have been selling white ware to mini china painters all over the world for 17 years now. We will snail mail a 6 page leaflet of drawings done the same size as the "real" item, free on request. The white glaze we use will go all the way up to bisque temperature if needed; the ware is THIN and there is no minimum order. For more info check us out at http://avonminiatures.com

Donna and Keith Brown


Faux Porcelain: To make a white porcelain/china looking object I first make a block of plaster of Paris. The item I wish to make is simply locked inside that block of plaster. I file and sand and curette (gouge) until I have the item released from bondage. I then smooth it with very fine grit sandpaper and polish with talcum powder. To get a porcelain type of shine I follow with clear nail polish over white acrylic paint.

Dr. Bob


Clocks: I made clocks for a state day. The way to make a lot is to request a clock catalog. You get a lot of neat designs. Then I bought movable eyes that come in a lot of different sizes. Using a razor blade I separated the plastic from the back. I then use the rounded plastic on top of the clock face. You can buy rings to go around the clock. I also buy small wooden shapes like houses, bears, hearts, apples -- anything that would look cute as a clock.

Bonnie in Montana


California Missions: Here's a good site for mission models, cut-outs. http://www.pressanykey.com/missions/

Lili


Porch: You can add any kind of porch you like. Most appropriate would be one about 6" deep and 8" wide. A very low pitch roof with gable to the front. It should be supported by 2 pillars at each of the front corners, and a 1/2 pillar (or a pilaster) at the back corners. Run a dentil molding around the 3 sides, just below the eaves.

Tom Berkner


Shows: I wanted to pass on a tip to all of you show goers. Sometimes it is all so overwhelming, and it's hard to remember just what you need, want or what color it should be. This really gets bad during the on going process of "up-grading." Some people actually take pictures of each room in the house and include a swatch of the fabrics and paper when you can. It's totally amazing to find something that is perfect, but you didn't know you needed it, so aren't sure what color or size it should be. Out comes the Notebook-You now know if it really is perfect. You can also ask for help from a stranger. This is not my tip, it's from watching people from the dealer side of the table. Those people always impress me, and intimidate as well. If I had the notebook, it would be at home with the grocery list.

Jan Smith


Show Shopping: When going to a mini show, leave that big heavy purse locked in your suit case or car trunk. You only need a cr. card; few checks; ID and cash. A cloth tote bag for these items and your new purchases. Also, take a few small boxes to put the new minis in for safe traveling. Maybe one doll size. Your shoulders & back will thank you and so will the other shoppers and sellers. You will have a smile on your face instead of a grimace.

Elise


Shipping: According to them (USPS), things have changed in the last few years. There are now First Class Rate, Bound Printed Matter Rate, Media Rate, and Library Rate. Of course, we all know about First Class Rate. Bound Printed Matter covers all material which has the majority of the page covered with printed matter and is stapled, sewn, glued, etc. together and may contain advertising, but it may not contain anything of a personal note, such as a letter or statement or bill. If even a bill is included, it must be sent First Class Rate. Media Rate refers to books, texts, workbooks, etc. and cannot contain advertising. Library Rate is for libraries only. So there it is.

Mel


Business Names: Perhaps someone with a legal background can add more to this, but I was told when I started my business: If you used a name such as "Tiny Miniatures" you were required to register with the state as operating under a fictitious name. Of course it is difficult to know if there are any other "Tiny Miniatures" across the country.  But if you used "Tiny Miniatures by Joe Smith" Or Joe Smith's Tiny Miniatures" or such, you are not required to register with state, and makes it unlikely there will be another company with that name. I operated my company under "Rainbow Design by Dean Jenson", though I often used just "Rainbow Design" but I did register Rainbow Design with the state. But even using the full name, I was often confused with Rainbow Hand.

Dean Jenson


Molds: I use Plasticene to make molds - but then, it depends on whether you want to keep the mold for future use. I like it because I can squish it up and use it again. I make my doll face molds from Fimo - what else? I wait until the shop sells off the unpopular colors at sale time and buy some of them up.

Lynne Connolly


Previous 10 | Next 10


Page 493 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)