Molds: In the Micro-Mark catalog they carry two forms of silicone rubber for making molds. They are both two part products, add A to B and then it is ready to use. One comes in a liquid and the other is a putty. It is rather expensive so I don't know if this is feasible for you. I have debated using it to make the fancy moldings my daughter needs for the ceilings and walls in her colonial dollhouse, but it is so costly it might be cheaper to just buy the moldings! Would a good acrylic house caulking work? The good stuff is strong and flexible, at least that is what my husband says. We want to make the moldings of plaster and thought we might try using caulk, let it set until hard and then peel it off and pour in plaster. How about using Milliput? It is a British two part epoxy putty that is suppose to dry as hard as porcelain and can be rolled very thin.

Marsha in Wisconsin


Molds: Recently, someone ask about what could be used to make molds - have you tried Magic Mold made by the Crayola company? We use it to make molds for cake decorations - It gets firm enough to press what ever you are trying to make a mold of into it with out firing and then easily releases.

Oleta


Molds: There are several products you can use depending on the complexity of the original and the material from which it is constructed. If it is fairly simple and from metal wood or anything that will withstand heat you can use a rubber product that is melted over heat, poured over the original and when cool can be pealed off and either resin or plaster cast into the form. If you want to duplicate something from plastic then use one of the two part silicone rubber products that you mix and pour and then make either a one or two part (or more) mold depending on the complexity of the item.

Roberta, Durban, South Africa


Molds: for casting I use a soft rubber mix specifically for casting in resin. I make a mold of my item out of this soft rubber, cast it in resin, make a plaster mold then pour my porcelain slip into my plaster mold. I am at home and do not have the product name at the tip of my tongue, however, it is expensive. It comes in two separate jars, you knead the two doughs together, cast your item, and within 15 minutes it has hardened. It is pliable so you can use a one piece mold, pour in your resin, let it harden for 15 minutes, then cut the rubber mold to retrieve your item in resin.

Rhonda in FL


Plaster Molds: You can use plaster to make a mold for something that will be plaster. And Murphy's oil is the right parting agent. The company that I buy my plaster from makes large plaster figurines, lamps and displays. That is their exact method. If there are any undercuts, however, you would be better off with rubber. Plaster is unforgiving.

Debbie Olsen


PLASTER AND PLASTER MOLDS: Suggest going to model railroad stores and getting "Hydrocal" rather than ordinary plaster or Plaster of Paris. Somewhat finer or more intricate/faithful detail. When pouring plaster into molds, turn an electric orbital sander upside down and clamp it to your bench. (I built a custom cradle to hold mine upside down). Tape your mold to the bottom of the sander. Turn sander on during pour. Vibration will help send air bubbles to the top and settle wet plaster/Hydrocal into the tiniest crevices.

Mel Koplin, Las Vegas


For a video on making rubber molds and casting write to or call:

Bragdon Enterprises
2960 Garden Tower Lane
Georgetown, California 95634

Phone 530-333-1365 ask for Joel.

The video is $20 last priced. It is very well worth it as it will show you how to make a great variety of molds. Even how to make Tiffany style lamp shades. At least ask for the price list.

He also sells the Rubber mold material and casting resins. Both are equal part A-B mixes and easy to use.

Bill Hudson


Another mold material is Liquid Latex, available at model rail road stores. This is a time consuming method but works well for duplicating such things as textured surfaces (Rocks).

Bill Hudson


Liquid Sculpey: Liquid Sculpey is a medium that has the consistency of toothpaste.  It comes only in white but can be tinted with acrylic paints. It is baked in the oven just like regular Sculpey. Because it is "liquid", not a solid compound, it's use is limited to either using it IN miniatures, such as cake pans, on cookie sheets, etc. or mixed with a "solid" or filler, such as I mentioned with the egg salad recipe.

Mary Eccher


Liquid Sculpey: here is the Sculpey home page, which includes some ways to use Liquid Sculpey. Check out the 'tile' frame. http://www.sculpey.com/fset_projects.htm

Kaye in L.A.


Previous 10 | Next 10


Page 494 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)