Toothpick Tool: Did you know that you can make your own little tools of various sizes and shapes to use while working with polymer clays? Just dip the tip of a toothpick into tacky glue, take a small amount of uncolored clay (preferably Mix Quick or transparent Fimo) and form the bit of clay onto the tip of the toothpick to the desired sizes and shapes. Bake in oven as usual.

Mary Eccher


p>Lost E-mail Addresses & Bookmarks: I have read in a couple of the latest digests about people losing their E-mail addresses, & it really scared me, so I just finished backing up my address book and also my bookmark favorites onto a separate floppy disk. I'm sure that most of the SS computer experts do this regularly, but it doesn't hurt to remind ourselves occasionally to take care of this. I do print my bookmarks periodically, but now I have them all safely on a floppy, for when, not if, my computer crashes!

Ann in CA


Printers: I thought I would let you know I have had both an HP and an Epson. They are both the better of the printers out there but both have their flaws. The HP feed rollers after about a year to a year and a half (unless they've replaced the rubber/polymer feed rollers) dry out and the rubber hardens which means you must manually feed the paper. You can usually re-hydrate them, but they are never the same once they go. The Epson’s are ink hogs but that is mainly because they use so much more ink than most especially depending on what you are doing with it. My current printer is an Epson Photo 870 it is a 6 color printer with a roll paper adapter. I can print photos or regular printing on draft mode. My suggestion for anyone looking to buy a new printer is to a) make a list of what you want to do with a printer. (High quality photos of miniature work, or general text, web pages or low quality work) b) price limits both on equipment, special papers, and ink cartridges. Then take these and search for reviews, especially on message boards as they are consumers they are more realistic.

Jeanette in Spencerport


Granny Squares for an Afghan: Just use a regular size pattern for making granny squares, but use DMC and a 13 or 14 hook works good. They are very slow going, but work out well with patience.  If you don't have directions for making them I could send them too you.

Marsha in WI


Granny Squares for an Afghan: I think you could just follow a full size pattern to make granny squares. With a size 15 crochet hook and thread rather than yarn, they should be the right size.

Cheri Stewart


Granny Squares for an Afghan: I have made mini granny squares using #14 crochet hook and sewing thread from a full size pattern. Looked great. I like using sewing thread because of the multi range of colors.

Marjorie in CA


Felt Hats: If you have access to WOOL FELT it's wonderful to work with. This can be done with craft felt although it seems to have a mind of it's own and does not dry as sharp as the wool would.

1) You need a FILM CAN with smooth sides, NOT the one with the ridge at the top.

2) Piece of 5/8'' DOWEL 2 1/4" long.

3) 2 Tiny RUBBER BANDS, like the ones they put around green onions in the market. Larger ones leave an ugly dent in the hat.

4) Glue. I use Designer Tacky or Veverette

5) A square of felt 3 3/4 x 3 3/4 for a one piece hat (crown & brim all in one piece)

Submerge the felt in warm water and squeeze out excess water, you don't want it dripping but it must be wet all be way through. Center the felt over the dowel and wrap a rubber band around and around till it is firmly held. Stand the dowel in the film can and bring the felt down against the can top and secure with the other rubber band. The crown will go slightly off center but that doesn't matter. When you trim this later you will cut around the brim about 1/4" or approximately where the bottom of the last rubber band comes so you want to work that rubber band down the film can at least 1/4". That band tends to mark the felt and you can avoid this by moving it down.

Set aside to dry, I usually leave them 24 hrs. When you take it off the can if you have used wool felt it will be real sharp on all the folds where the Poly felt relaxes and has a different look. Now the fun begins, trim with feathers beads, roses, ribbon or what ever is your fancy. For a two piece hat, make the crown the same way we started the first hat. Cut your brim any size suitable and put a 5/8" hole in the center. When crown is dry trim it to the height you want it. Put a tiny bead of glue around opening of brim and place crown in hole. Press both parts together and leave to dry.

Helen from San Diego


MINI KNITTING PIN SIZES: I checked my mini knitting pins. UK size 18 is 4/0 USA 1.25 metric size 19 UK is 5/0 USA - no exact metric size. I use metric 1.00. If you need any more sizes let me know. I can't crochet so don't know about crochet sizes.

Liz


Waste Knots: This is a way to start off an embroidery without having a knot on the back.

1. Make a knot in your thread.

2. Put the needle through from the top (right side) of the fabric to the bottom, about 2" away from where you will start stitching. Then come up where you want to make your first stitch.

3. Start stitching, leaving the knot sitting out of the way on top of the work.

4. When you finish your thread, end it off by weaving it through the backs of 4 or so of stitches to stop it unravelling. Cut this thread.

5. Now carefully cut off (*waste*) the knot that is sitting on top of your fabric as close to the knot as possible. Thread the 2" end into your needle on the back of your work, and weave it through the backs of some stitches to anchor it.

Your waste knot is now removed, and the back of your work isn't lumpy.

Kay in Ottawa, Canada


Bricks: I've just finished "laying" a brick floor in the basement of my Federal dh. I used "Foamies" which come in 8 X 11 sheets (if you have small children or grandchildren, you'll be familiar with the product). I painted the sheet first, let it dry and then drew lines 1/4 " apart on the reverse horizontally and then lines 3/4" apart vertically. The product cuts easily with scissors. Piece by piece, my daughter has glued these tiny "bricks" to our basement floor (the house is not assembled yet). I'm not sure if anyone has thought of this yet, but I am pretty proud of myself! So far the effect is just what I was hoping for and the foamies has just a little bit of texture when you paint it that makes them really look like bricks!

Dorothy in California


Previous 10 | Next 10


Page 495 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)