Craft Sticks for Flooring: I used craft sticks to make my floors in my dollhouses. I cut off and sanded the rounded ends. Then I cut them according to the pattern that I wanted to follow. Next I glued them down with Elmers wood glue. Once all the craft sticks were in place I sanded the entire floor until it was smooth. Next I stained it and then went back with black paint and put in all the black dots for the nails. Once that was done I then varnished the floor. That gave me a wonderfully inexpensive wooden floor. Lisa Carreiro |
Cork Floor: We recently had a flood and as part of the fixing up, had one of our landings done in a cork floor by a friend who manufactures them for a living. we all love the feel and look so much that I was determined to incorporate it into my dh. It came out great!! Not perfect, but great. I thought I'd share what I did -- in case anyone wants to try it. (BTW cork is soft, not hot in summer nor cold in winter, great for allergies, and very durable.) I found a roll of cork at AC Moore(about 1/8" thick). I cut a template to fit the floor out of brown paper and cut many 1/2 inch square "tiles". My floor is roughly 9" square tiles and this seemed an easy to manage size -- if not 100% accurate. I also cut 1/2" strips for the border. I stained the border strips a darker color and left the rest plain. I then glued the pieces onto the paper, placing them as diamonds rather than squares. I placed the borders first and then cut and trimmed as needed to make it all meet. Then I polyurethane the whole floor--3 coats. After it was dry-- I glued the paper to my dh floor. I used quick grab and so far so good. everyone has been impressed and I'm kinda proud of it too. Carol |
Dulling a Gold Finish: it sounds like the jewelry finding you're working with has a smooth surface instead of filigree, so the usual antiquing (paint black or dark brown, then rub off quickly before dry so paint sticks only in the details) wouldn't work. You might get a similar all over effect by spray painting black or brown very lightly -- put the piece in a box or paper grocery bag and aim the spray next to the finding instead of directly at it, so just a faint mist hits the metal. Or if that doesn't work, you could try mixing a couple of drops of dark acrylic paint into some Mod Podge and painting that over the metal. That would be slightly matte and slightly darker when it dried. Loretta Sniarowski |
Dulling a Gold Finish: The product that will darken silver, gold, copper, or bronze is called "Silver Black" by Griffith Distribution. I bought mine at a well-equipped bead store, and I have seen it in lapidary or jeweler's supply shops and at jewelry supply booths at gem shows. It seems to be Hydrochloric acid, in case you know a chemist. You paint it on the areas that you want to be darker, then rinse it off after it has darkened enough. You can rub some off with a cloth to lighten certain areas. Obviously, you have to be careful, as it is very corrosive. If your pin is plated plastic instead of metal, I would not try this method. If it is a base metal, you could try a tiny bit on the back first. Another approach that may work, is to just leave the pin in a very sunny window for a week or two, which may tarnish it. Or, you could use a bit of antiquing gel, and wipe off the excess. Terri Rowe, Columbus, OH |
Dulling a Gold Finish: To tone down an overly-shiny metallic object, I just use plain old brown or black shoe polish, or waterproof mascara. Glob it on, wipe it off gently with soft cloth or paper towel to "antique" it. WAIT TO DRY-- may take overnight depending on how humid your climate is. Once it is dry, spray with a matte finish clear spray. I have done that for some shiny brass items and it seems to work well. Some people use liquid shoe polish, some use paste. I've used both with equal success. The only problem you may encounter is that if your item is costume jewelry it may have a clear finish over the metal and that might repel the "antiquing" you're trying to achieve. When I tried it, it was with raw, unfinished brass. Debbie Jones |
Dulling a Gold Finish: A couple of things you might try with the jewelry. If it has a lacquer coating you will need to remove it. That is often enough to darken the metal. If it isn't, you can dip it in a bath of sulfur (a little bit in water). Otherwise, you can use a stain (like a wood stain) or even thinned down paint in a dark color, paint it on and wipe it off until you like the look. Jacqui in Hilo, Hawaii |
Painting Exterior: I paint the exterior after putting the house together, before installing window, door, and edge trims. Also before installing any wallpaper or floors to avoid splatters. Paint all trim before cutting and installing. You can touch up the miters after assembly. I learned a trick from an "old timer" to purchase or use, a door & window to test color schemes if using several colors. That way you can change your mind and try another scheme until you find just the right combination for your particular house. Another "trick" is to use a crumpled piece of brown paper bag (watch that there is no printing on it) to use as "sandpaper" between coats of paint. It works great as it is more gentle than sandpaper and makes a very smooth finish. Be sure to let any paint dry a good 24 hrs before working with it so the paint has time to harden. I think we sometimes try to rush. If nothing else, Mini's teach you patience. I usually use 2 or 3 coats as I feel it gives it more depth, and is sure to catch any "holidays" ie: missed spots. Diane in SF Bay area |
Fabric Wall Covering: I have often used fabric instead of wallpaper. It's just a more comfortable thing for me to manipulate; besides which I usually have such good stuff left from sewing and buying way too many remnants. As always, prime the bare wood and sand smooth. Cut fabric slightly bigger than the wall. Then apply paste to the wall and smooth the fabric over the paste (old credit card is a good for applying and smoothing). When dry, trim excess w/newly bladed X-Acto. Trim out windows from outside the house. Obviously this assumes you can get the windows out. When you can't, that's probably when you need to use the card template method. I have used Mini-Graphics wallpaper mucilage and bet that similar products would work as well. Rooms "fabric-ed" 20 or more years ago still looking fine; on the other hand, one that I recently decided to change came off cleanly and easily. So give it a try! Ginger in PA |
Fabric Wall Covering: The reason for the card as I understand it is so you can have easy access to what is underneath, a smooth surface to work on, easier to manipulate-- think of it as "drywall". If you ever have to do anything with electrical wiring and you have glued the covering to the wall, you will have to tear off the fabric first, which can cause more problems than it might be worth in the long run (having to replace fabric that may have been discontinued since you last looked for it, damaging wiring etc.). Gluing the fabric right over the wires may leave a wire trail under the fabric as well, which probably would look worse than the thickness problem. That is my guess, anyway. Kim in Canada |
Fabric Wall Covering: Is it ABSOLUTELY NECESSARY to make a template and/or use card stock underneath? No. It is not. In fact, I never have. I prime the walls, then paint a color that is least likely to show through. If the background of your fabric is white, you would paint the wall white. Likewise, it the background of you fabric is red, paint the walls red. I usually apply the fabric with decoupage medium. I see no reason why a mixture of 3 parts tacky glue to 1 part water wouldn't work just as well. Sloan |
| Previous 10 | Next 10 Page 497 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |