Old Painted Sign on Building: I thought of a couple of ways you might do this. First, depending on what the side of the building is, brick, smooth wood, etc. You might scan a picture of the ad into a graphics program and print out on transfer paper. Iron the transfer paper to the wood (preferably before assembling.) It will probably transfer with tiny pieces missing anyway but you could then scrape little bits from the edges and sand a little on the surface. Then apply an aging mixture made of raw umber and raw sienna, or gold and brown acrylic paint watered down to be transparent. Apply then wipe off with a soft cloth until you like the appearance. The second way would be to use a "real size" antique label or print one and decoupage it to the side of the building. This is done using a product called Mod Podge, or similar, to "paste" it to the building side. (I always though you could probably use white glue instead..) Then apply a couple of coats on top. Use the same techniques as above to age it. This is a good site for old fashioned labels http://www.thelabelman.com/ Another possible way might be to use Picture This or similar transfer medium. It is originally meant to transfer pictures from paper to cloth. Use a photocopy of the label and apply the transfer medium and let dry overnight. When completely dry wet the paper side really well and using your finger push back and forth on the paper to peel it off. When you are done you should have transparent "decal". Apply this to the side of the house and antique. This method I haven't actually tried so you will have to "experiment". Barbara D. |
Old Painted Sign on Building: For aging posters on the side of a building try a dilute solution of house hold bleach. Apply it so that parts of the sign fade away. Dr. Bob |
Old Painted Sign on Building: I remembered that there is an article in the March 01, issue #81, of Dolls House and Miniature Scene magazine from Britain. There is a web site www.emfpublishing.co.uk and email is dolltedemf@aol.com. the article is called "A Country Smithy part 2" and it is on pp.22-25. Hope you can get a copy. June in London, Ontario Canada |
Old Painted Sign on Building: I would suggest the following: [1] Decide on the ad desired for building. Either scan it through your computer or have it copied at your nearest copy shop. When having the printing done ask for the lightest possible print. Have at least 3 copies made -- allows for mistakes. If doing on your computer set the print quality for the lightest available [go into properties in the printer setup dialog box]. After printing off copies with the desired result. Be sure to back and RESET the print quality to NORMAL. Can't emphasize that enough. [2] Spray the copies with a fixative spray. You purchase this at an art supply or art & frame store. Might also find at Michael’s, Aaron Brothers. Let dry thoroughly. [3] Decide on the size and how much of the ad you want to actually see on the building. Begin TEARING the edges of the print to size to get the "old, ragged look". [4] Apply YES glue to back of print. Apply to building and let dry at least 24 - 36 hours. [5] Apply Matte finish Mod Podge over the print. Let dry 24 hours. [6] Apply antiquing gel or your mix of "dirty wash" over the print and side of building. If using antiquing gel wipe off gently to create effect desired. You might also want to sand paper the ad prior to antiquing it depending on the effect you want. Patricia, Redwood City |
If web photosites, work for you--great! But I would like to say that it is possible to have *thousands* of pics on a webpage and organize it so it loads quickly. Molly |
Dryer sheets: When I was dressing miniature dolls I used the dryer sheets to make patterns out of for their clothes. They don't tear like paper you can mold the pattern around the dolls body to fit and nip in order to get the correct fit. Sclarise |
COLORFAST THREADS: Sorry, most needlework threads have not been guaranteed colorfast for many, many years. Has to do with government rules regarding dyes that they can use; in fact, several of the manufacturers send out literature to the retail stores advising that the consumer should rinse them in warm water before using. Can you imagine???? I should think they would just run them through a warm water bath after they are dyed. But, no. The burden is on the user. Ginger |
Mini Needlepoint: Here's an article about miniature needlepoint. There's a bit of decent information in it, although I personally disagree with many of the do's and don'ts, cans and can'ts, and other technical info that the author provides. You know I'm an advocate of mini stitching, so the main point is to get your feet wet and then do your own experimenting with the designs, materials and techniques. Unlike the power tool situation, you can't hurt yourself!http://needlepoint.about.com/library/weekly/aa102000a.htm Ginger |
Mini knitting yarn: The yarn with which one darns socks (if one does that sort of thing) is suitable for mini knitting, or so my mini knitting chums tell me. Me, I stick to real size knitting. Helen from York |
One Ply Thread: I have a lot of machine knitting yarn in acrylic. I get it at the second hand store. It comes in large cones. It is also available at yarn and knitting shops. Further; the yarn used for Russian punch/punch embroidery, comes in spools and is a very small yarn that I use for making clothes for my small dolls, and mini babies, it also makes great afghans, blankets and bedspreads, is handy for a take along work project. It is acrylic, in many colors, and I crochet (only) with it. You can get it at fabric stores, craft stores, and Wall Mart etc. You might try Hirschner's catalog, they have all kinds of threads and yarns. Second Hand Rhoda |
| Previous 10 | Next 10 Page 498 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |