Burning Sculpey: After I burnt my lettuce one day my sister suggested heating the oven to 250 degrees and then when I put the items in I turn it off. No more burnt anything. I do things from cherries to pies. I put the whole tile in and let the oven cool and then take the whole tile out. I use Sculpey II but I have used some Fimo. I even formed a white dog and then painted spots on it to look like my Pointer. It isn't great but I like it.

Rita


Baby mobile: Go to a mini or craft store and find a few little things that you want to hang from it, toys, charms or whatever suits your fancy! Cut two pieces of wire about 1 1/2 inches long, and twist centers together to form an "X". Make tiny loops on each of the four ends. Using thread, hang your toys. Tie a piece of thread to the center and hang it from the ceiling...or..use another piece of wire to create a hanger in the shape of an arc. Attach one end to the crib and hang the mobile from a loop in the wire at the other end!

Alice Zinn- Pt. St. Lucie FL


Polyclay fumes - a possible solution for bird owners: I don't have any birds, but I would ask at your local exotic pet shop or vet's office about the dangers of baking polyclay in the same environment.
In case there is a risk to your avian kid(s), there is a solution. Get a toaster oven for polyclay use only and use it on your patio. I live in a house now, and I have outlets all over the place outside (for yard equipment and Xmas lights, I presume), but when I lived in a flat, we had an outlet or two on our patio as well (probably for Xmas lights). Just go outside and bake your polyclay with your doors an windows shut, and your birds should be fine :)

Maura Bass


Fimo Fumes & Birds: "Better safe than sorry" is the rule that I would use in regards to birds and fumes. The respiratory system of a bird is so delicate that ANY fumes can be dangerous. I would never bake Fimo or Sculpey in the same house as my birds. The toaster oven on the patio is a great idea. I worked part-time in an excellent pet store for several years; our advice and the advice of my avian vet is never take a chance.

Carol


Polymer clay safety: Many people buy a used toaster oven that they dedicate exclusively for clay baking. This will allow you to take it outside to bake, either with an extension cord or outside outlet. If your bird is that sensitive to fumes, I would say it's too risky. Get a toaster oven at the flea market or thrift store, or even an inexpensive new one.
Also, someone mentioned using an upside-down baking dish for clay baking. I would only use a dish specifically dedicated to clay. Maybe I'm overly cautious, but in general, I like to keep excess chemicals and fumes out of my house.

Lynette in WNC


Polymer clays: Here is a large and very informative web site that explains all you will ever want to know about working with polymer clays. I don't think that you really have to worry about the fumes... unless you fill your oven up with clay things, crank the heat up, close all the windows, and breathe deeply for a long time! There are several people on this very list that have been working with polymer clays for years and years...and, they are still kicking. (Come to think of it... I'm one of them.)
http://www.glassattic.com/


I am assuming that you want to do a few things and bake them. As someone just said in this group, and I second it...don't go by the mfg. instructions on the package. We are doing quite small things, and they don't require as hot a oven, or as long a time as the directions say that they should.
If I am doing really tiny things, like, gingerbread boys, for example, I put them in the oven at say 325 degrees and bake for maybe 10 minutes. Even larger, thicker things will continue to bake if you take them out of the oven, but leave them on the hot-whatever-you-are-using.

Kaye in L.A.


Clay Cutters: Although I use Kemper's claycutters I have two other clay cutting suggestions! If you have or can find aluminum tubing (K & S is one brand found in some mini stores and model shops) you can make a telescope of sorts out of two sizes which fit one inside the other. Cut about a one inch length of the wider one and a 3 inch length of the narrower one. Use the larger one the cut the clay, and the smaller to gently push it out! I have also make myself cutters of my own design by bending strips of the kind of aluminum from disposable pie pans into the shape I want, super gluing the ends together and gluing on a handle, like a basket handle in an arc across the top. BE CAREFUL if you use these, the edges are sharp and this is not a project for kids!

Alice Zinn


Free web photo album sites: I know of a couple of free web photo albums:
"Studio Ave" hosted by the people who make Paint Shop Pro:
http://www.jasc.com/studioave/index.asp?

And "Picture Trail"
http://www.picturetrail.com/

Anne Gerdes


Loom: To get the effect of a loom in another room, I wonder if it would work best if the picture of the loom was on one wall, and then was reflected onto a mirror on another wall, so you are not looking directly at it. In that way I believe that the glossiness of the photo will be less obvious. Maybe you could even put a candle stand or something in front of the mirror so that the loom shows up behind it.

Viola


Lumpy Mattress: for the mattress instead of using foam rubber, you should be able to use cotton balls and be able to get a nice lumpy effect, but if you really wanted to be more authentic, I believe that they were stuffed with hay or corn shucks, so I would think that you could use dried grass clippings.

Rusty in Ky


Previous 10 | Next 10


Page 503 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)