To make minis in crochet: You can use hook size from 11 to 14 depending on what you are making, and DMC floss 1 or 2 strands. You can also use crochet cotton size #30 for your rugs or doilies. It is best to experiment.

Linda in Canada


Flagstone floor. I made a flag stone floor for my basement kitchen. The method is taken from Brian Nickolls' book, Making Dolls' Houses in one twelfth scale. The instructions are on pg 114 and the picture on page 107, for those of you who have the book. The flagstones are made from Formica or other plastic laminate (a whole big piece cost me R5 - about 50 p, i.e. For nothing! ANY design as you use the BACK.) You cut the pieces into 2 by 2 inches and then some into half, to make 2 by 1 inch. You first cut them straight (I used my mini circular saw) and then sand them to give an uneven edge. (I used my UNIMAT). Edges that are going to be along the front wall or back wall must be left with one straight edge. Stick the tiles in a random pattern using contact adhesive (I used Alcolin contact glue) with the *reverse* side of the laminate upwards. This is the kind of pattern ll=ll=ll but more random. So far, so good. Before you grout, seal with a layer of *satin* varnish. i.e. not shiny gloss but not matte either, sometimes called suede. Grout the gaps with spackle or Pollyfilla or what ever you call it, tinted with grey. (DEFINITELY do a test piece - I was only happy with my third colour grout.) I filled the gaps with spackle but when I took the damp sponge to wipe off the excess, it left almost no spackle in the gaps. Sooo. Leave it to dry even though it looks like you have ruined your beautiful floor. Next day, take a sanding block (I also like those sponge based ones) and sand off the excess grout, leaving the grout between the tiles. Finally varnish with another layer of satin varnish. It looks great. This makes a fairly uniform floor.

Barbara


Mouse House/Borrowers: Can I add my 2 cents worth of ideas here? If you're going for a look that the mice have "borrowed" from the "real" house for furnishings....how about using a spool of thread for the base of a side table, maybe a locket (opened) and hung on the wall for picture frame, a spice rack (or wall shelf) made from one of those small wood match boxes, Columns made from pencils.

Sloan


Frank's Green Thumb, color stains, mossy furniture: I have been having fun on my 1/6th scale Frankenstein's flower & garden shop . I built the box this weekend and used the sponging technique for my walls described in the archives...I started with a lavender primer coat... then added blue and red tints to my bowl of paint...doing a "sponge job" after each color change...I finally added some sienna tint to the witches brew and the resultant burgundy-brown was my final layer. I have to say, I love how it looks...layered and deep and rich...this SS tip really worked great!

Then I stained my cornices and baseboards a reddish violet (1/3 parts WoodBurst violet woodstain mixed with 2/3rd parts Minwax natural stain)and installed them. The outside of the box is covered in fishscale cedar shingles. After the glue had dried (overnight) I mixed Woodburst green stain with the Minwax natural and stained the shingles. The result is like a fanciful dragon-green scale look....with the shingles all taking on different amounts of the color. That contrasting with the purples and violets of the interior gives me just the color contrast I wanted. I thought this would look great for a "Harry Potter" box too.

The real fun project was bashing some $1 furniture I bought at my local 99 cent store. I want some of the elements in the box to look as though moss is growing on them. I took a maple stained bench and used Plaid Crackle medium with an overcoat of light purple. Then I used foam railroad foliage to create my moss. I attached it with Sobo glue. I did the same to a chair, display case and trunk I am using in the room. It was a really easy and cheap project and I love the results.

John Medeiros


Egg Salad: Roll a snake of white polymer clay and square it off a bit with your fingertips. With X-acto knife, slice your snake into chopped egg white pieces. Bake these in oven at 200 degrees for 10 minutes.

Put a bit of liquid Sculpy in a paper cup and stir in just a touch of yellow acrylic paint. (The proportions of yolk mixture to chopped egg whites has to be determined by YOU for the look of real egg salad.) Mix your egg whites into your yolk mixture. Put some into a miniature bowl or spread on sandwiches. Bake all again as above.

Mary Eccher


Mineral Oil can certainly be used in canning jars instead of resin with no ill effects on the clay addition. Just make sure the clay is well-baked and that you seal the jars tightly.

Mary Eccher


Egg salad: I have never made this, but here is how I would do it: Make a small snake of white Model Magic and allow to dry. When completely dry, chop into small pieces. Mix a little acrylic gel medium, a little glue, and dabs of white and yellow paint until it is the right color. Add just enough glue mixture to the chopped "egg" pieces to coat them and stick them together, allowing a few spots of white to show through if desired. Spread on your bread or in a bowl and allow to dry.

You could also use polymer clay for the egg, I bet, but one of the advantages of the Model Magic is that it's squishy even when dry, so it might look more natural. Polymer clay pieces might stick up in funny ways.

Celeste in Boston


Onion skin paper: Your onion skin paper, if it is really light can be used to make napkins for the dining room. I have made Christmas, Halloween and floral ones. In a print program I placed the image on the four corners of the napkin just as real ones are printed. Another thing I did with the onion skin paper was to make Christmas wrapping paper with a very small design. It would also work well for those plates you were making because it would be very transparent.

Jean Day


Hot Tub: I plan to put a hot tub on the redwood deck of the dh I am constructing. I found a black bowl....actually a "Rice Bowl" meal from the frozen food section. This bowl had "seats" around the bottom of the bowl and looks to be the perfect size to set in a wood frame for my hot tub. I can't beat the price either! It's a micro wave dish and using a hot ice pick and some rivets like "eyelet rivets for sewing", I can easily install the jets.

Katherine


Mini sofas: I made a lovely modern sofa with squares/rectangles of foamcore, fabric and doweling of various sizes, padding, ruler and a very sharp utility knife.

First thing I always do is make a quick sketch of what I am about to build. I then figure out the dimensions of what I want and put those on a more diagrammatical sketch of the furniture. You can use your own furniture to measure for seat height/back height, width, arm length, etc. Modern tends to lean towards squares and rectangles, and is the easiest furniture to make because it relies on the simple art of cutting in a straight line. I would suggest trying a modern sofa first, just to get the feel of the design and the mechanics of how it is put together. Then when you feel frisky, go for curves et al:).

When I build furniture, I upholster as each step progresses. Upholstering takes some practice, but will go well if you always remember to hide raw edges, don't use so much glue that it leaks through the material, trim when you need to reduce bulk, and use a pattern that will allow it to be glued. Choose a fabric pattern that won't look "out of scale".

My first step is to build a box. This is the seat support. To the sides I add the arm rectangles (remembering to make them high enough so the level is above not only the box, but the impending seat cushion). If I want to make the arms a bit "rounded", I add dowels to the sides.

The arms/seat assembly is glued to a base of foamcore that is as wide as the front of the chair, but longer in the side width by a foamcore width. This is to accommodate the back of the chair, which is glued to the base and back of the box (so it forms an "L", with the top leg of the L balanced on the base of the L).

The seat cushions go on next, which are a back cushion (a rectangle with chunks cut out to accommodate the arms -- probably the only really tricky part of the chair assembly) and a seat cushion. The back cushion goes in first, then the seat cushion is fitted in up against it. You can put padding on these for a softer look, or for a more firm look you can always go without -- depends on where you intend to use them.

For legs, I have been known to use simple round dowels, but there are other things such as beads, square wood stock (peace, man), commercial legs, ends of commercial bedposts, fimo creations, etc., depending on what you are going for. I have also put an extra base on the bottom and put a ruffle around to hide it.

I have made this type of sofa in 1/4" scale, 3/4" scale and 1/2" scale, and all looked very nice, and have gotten many kudos on them. The original idea came from my grandmother-in-law who made a similar chair in her dollhouse (my first mini tip:)), and part of which also came from an old nutshell news article (ideas for the dowels as arms). If you don't like the thought of foamcore furniture, there is always the wood option too. I like the foamcore because if I really mess up, I don't feel as bad tossing it as I do when I have gone out of my way to find hobby wood.

Kim From Canada


Previous 10 | Next 10


Page 510 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)