Fimo Tiles: You can use a pasta machine to roll your fimo out to equal thickness. But you have to have a pasta machine only for fimo. My friend who is my expert says you can never use it for food once you use it for fimo. I used hers to roll out white and make ghosts for my haunted house. You just keep putting the clay back in the machine till it is as thin as you want. Hope this helps.

Carbomax


To make the tile shiny and ceramic-y looking, use Sculpey glaze. Just one coat does a great job! Available where polymer clays are sold.

Alice Zinn


Fimo & Arthritis; I saw a few digests ago that someone said they can't work the Fimo because of arthritis in their hands. I have very bad arthritis in mine and it is working the clay that helps keep the stiffness and pain at bay. I use the palms of my hands to work the clay and my fingers to shape it after it is workable. Now that I have my wonderful pasta machine, that is no longer a problem. I roll, roll, roll until the clay is smooth and blended and workable.

If you have hands that are too warm for the clay, you can chill it in the fridge to firm it up, but another way I used before the arthritis was to keep a bowl of ice water near at hand and a towel to dry on. If my hands got too warm, I dipped them in the water and dried them off and went right on with the clay.

Norieta


Sunflower centers: I saw this somewhere; for the centers, use brown Fimo, and then use a piece of nylon stocking to make the seeds.

Kaye in L.A.


Bowls: I was playing with my Sculpey and discovered that my circle template can be put to good use. It is one of those with holes in it from an eighth of an inch, to two inches. If you take a marble, or any globe shaped object, and put it in a circle...kind of like an egg in an egg cup...then there is a round part that sticks through the other side over which you can mold the clay to make a bowl.

No need to keep it even all around the lip of the bowl, the template keeps it even. You can even make a wide lip on the bowl by mashing the clay against the template, and trimming it evenly all around. Pry the marble shape out, and take the clay off the template, put it face down on the tile, and you can use any round cookie cutter kind of tool to center over the bowl, and cut off as much of the lip as you want. You can even choose a different size hole in the template, and use that to mark where you want to cut off the lip.

The bigger the globe shape you put in a hole, the more shallow the bowl will be. A variety of marble sizes, and the variety of circles in a template, should give you just about any shape from a soup plate, to a deep mixing bowl. It is also pretty easy to determine if the little bowl is level to mash it down a little to make a flat bottom. It is easy to eyeball the template and tell if it is level or not.

Terry


Painting Fimo: A *tip* for fimo-sculpting wannabes who use ovens and not the boiling method of curing-- Paint raw fimo with acrylic paint first before you cure. You will find that the paint job goes on so much smoother, and all subsequent coatings of paint will have a nice surface to glom onto.

Kim in Canada


Making moulds, have you ever heard of Gelflex? I have used this for crafts (not minis yet) it is a rubber type of material in a block, you cut off what you need and melt it, pour it over the item and it sets. But as it is a rubber like substance it is flexible enough to remove the master, and again to remove the made item at the end. I hope this helps as it is a great product.

Noni


Hawthorne: The Hawthorne was my introduction to the mini world. It was my first mini project and perhaps I should have cut my teeth on a smaller house but I had a wonderful time building it. It is beautiful and I am very proud of it. I bought the kit at a local ministore (Depot Dollhouse, now closed) where they had a model already built. For the most part I found the directions easy to follow, but due to my inexperience I sometimes had trouble visualizing the end result of certain steps. At this point I would run down to the ministore and examine the display.

There are a few things I would have done differently had I been more experienced. I did put one coat of paint to prime the walls and floors and two coats on the ceilings before assembling. However, you notice that there is a gable and tower joined to the front of the main body of the house. Where they join there is a crack across the ceiling of the left front first and second floor rooms. The house opens on that side so it is very visible.

Now it is all furnished, wallpapered, electrified with chandeliers hanging from the ceiling and too heavy to turn upside down. In those rooms I should have perhaps put wood filler in the crack and textured the ceiling with a mixture of paint and spackle. To do so now would be a real hassle.

The other thing I would have done is made templates of all the floors and walls while they were more accessible. This would have made wallpapering etc. much easier.

Harriett- Framingham, MA


Business Name: There are various ways to find out if a name you are thinking of using in your business is already in use. (Although that doesn't necessarily mean that a prior use precludes your use. More about that in a minute.) None of these is foolproof:

1.The U.S. Patent and Trademark Office has an online searchable database of all marks that have been registered or have registration applications in progress at the federal level. It does NOT include marks that are registered at the state level or marks that haven't been registered at all. The site is http://www.uspto.gov/web/menu/tm.html

2.If you have the time and patience, you can check with every state's Secretary of State for names that have been registered as company names, trade names, or trademarks. Many states (if not all) have online searchable databases.

Because neither of the above will turn up unregistered names (and there are plenty of them) or names that may be confusingly similar (and there are even more of them), you'd need to do a more comprehensive search to feel secure. So, how do you do this?

3. The best way is to engage the services of either an intellectual property lawyer or a company that is in the business of doing trademark searches. (Both will cost money up front, but as I tell my clients, you can pay now, or you can pay later.) In my opinion, the better way to go is to have a lawyer do the search or, if you go directly to the search company, have a lawyer review and give you an opinion on the search results. The fact that a company has a similar name or trademark -- or even the identical one -- doesn't necessarily mean that another company can't use it. Without going into a discourse on intellectual property, the second company's rights to use the name depend on factors such as (1) the first user's geographic market and/or type of registration, if any, (2) the goods or services in connection with which the first user's mark is used, and (3) the strength (uniqueness, widespread recognition, etc.) of the first user's mark.

Rosemary


Tin Roof: I have to opt with all who have suggested putting narrow wood strips every inch or inch and a quarter. At least in Virginia and West Virginia, every tin roof I've ever seen has been flat spaces of tin (from the ground they look to be about 12 to 15 inches wide) with ridges where the pieces of tin are joined together (I think it's probably a rolled joint of some type). The corrugated "look" I think would be more comparable to those fiberglass roofs that everyone put on carports for a while. I've seen them on small business type buildings too and maybe they're even made from aluminum, but for a tin roof on a house, I've only ever seen the flat with ridges (lived under one for a while too and the rain was wonderful!)

Mary Lynne in Huntington, WV


Previous 10 | Next 10


Page 513 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)