Sculpting Wax: There may be better answers from other members, but to my knowledge there are a few different waxes called sculpting wax. Jewelry makers use casting wax that comes in varying degrees of hardness. These are used for lost wax casting of metals and the different hardnesses are (I think) so that you can work on different areas at different times without destroying your previous work. The wax I have used for lost wax casting in bronze and in glass is a brown, fairly soft wax that can be softened in your hands somewhat like Fimo. It can be shaped by hand when soft, carved a bit when it is harder, and it can be added to by heating and melting bits together. It would then be invested in plaster (various formulae depending on use). I used to get it in our college bookstore art supplies department, and I believe companies that cater to sculptors should carry it. Since I am kind of isolated here, am not sure where else to look (my only option is the internet). Depending on how you will use it, it could be called by other names, or other waxes might work for you. Nasco Crafts catalog carries a variety of waxes and I am pretty sure they would work for your project. I believe they have an online catalog. Jacqui in Hilo, HI |
Wax Casting: Most jewelers waxes are very hard and melt at high temperatures. They come in red, blue, green and purple and are so heat resistant that I can actually turn them in my lathe. Jacqui from HI was correct that there is a softer wax that may work for your purposes, it is commonly used as a "glue" to attach pieces together but isn't normally used to create things with by itself. It is called "sticky wax" and melts at about 175 degrees. There is another water soluable wax called "Sol - U - Carve" that is designed to dissolve in water. This might be more practical for you to try since you won't have to worry about wax getting all over your oven. I don't see why you can't at least experiment with it - I for one would love to hear if your experiment is a success. Here is a link to Kerr, the manufacturer of waxes among other things: http://www.kerrlab.com/index.htm Use the search feature and enter "Wax". Be sure to check out the different kinds to see what will work best for you. You may be able to have a local jeweler order what you need. Bonnie Gibson - Tucson, Arizona |
Sculpting Wax: The type of wax that you will need to do that is called microcrystaline wax. It is used in bronze work and jewelry making when using the lost wax process. Any store that sells quality jewelry making supplies, like an artist supply store or lapidary shop will probably have it. I always got mine from the bronze foundry where my Dad had his bronze sculptures cast. It comes in different hardnesses, depending on the amount of beeswax or paraffin in the mixture beeswax is softer, paraffin is stiffer,) and is color coded as to hardness. The brown is the most common, and also one of the softest (amber is even softer, but harder to find.) The red is harder and I think blue is the hardest for the finest detail in jewelry pieces. To polish the wax piece, you use mineral oil or other petroleum products as a solvent and a soft cloth or piece of panty hose as a buffer. You can get quite a sheen with this! Riogrande, the jewelry supply people, sell the wax on their web site at http://www.riogrande.com/ or from their catalog. Tere Perry in Texas |
Glass Domes: You will find glass domes at http://www.littlebobbycreations.com/ Price depends on the number you buy. Jennie in San Antonio, TX |
Glass Domes: If you have a Michael's Craft store, they carry glass domes in various sizes. Also the bases. They do tend to be a bit expensive but perhaps you can get a quantity discount. Diane in SFBA |
Polishing Silver: Toothpaste will also polish silver. I sometimes save small jars and wash it with water and some toothpaste, I place the silver overnight or for a few hours. Rinse and dry with a soft cloth. Paulette |
Oriental rug: I've been pining for a beautiful mini oriental rug for a long time. I checked out a stunning Oriental rug book at the library and scanned some of the rug photos. I scanned at 400 dpi and converted the colors from RGB (red-green-blue) to CMYK, (cyan-magenta-yellow-black) for even more intensity. (I did the color conversion in CorelDRAW 9.) I printed the rugs on light-grayish cardstock with a bit of rag content and it looks great. I'll add fringe. But the killer result happened when I printed the Oriental rugs on the new art canvas paper available at large computer stores. Words cannot even describe how realistic this looks. The art canvas paper really gives the texture this look needs. Since this special paper is meant to go through your printer, I like this much better than putting fabric through the printer. I'll put a finishing spray on the Oriental rugs and display them proudly. Leslie Ann, CA |
DHW magazine: The online address for Dolls House World is www.dollshouseworld.com US phone # 812 537 3335 Ashdown Publishing, 32 Woodlake Dr. Se, Rochester, MN 55904. A really great magazine! Shirley |
Brooke Tucker: I have a bit of an announcement to make. Brooke has asked me to be her Online Representative and I have happily accepted! Due to her busy schedule, she just simply cannot deal with all the email she used to get so she now does not do email at all. So that is where I come in. I do email and I know Brooke's work pretty well. If you have any questions about products on her website http://www.brooketucker.com or have general questions about classes, feel free to email me directly or through the site at info@brooketucker.com. If I don't know the answer, I will contact Brooke and find out the answer! Her various accessory items that are on the web site are both high quality and reasonably priced, so you can own a Brooke Tucker Original piece without breaking the bank! Please have a look when you can. Bob Francis, Calgary, Alberta, Canada |
Dremel Sanding Disks: Sanding discs and full sized orbital sanders will both leave a circular sanding pattern on whatever you are working on. These would be appropriate for reduction sanding, where you are trying to remove a large amount of material. If you use them on furniture and such, you will have to follow them with another sanding method in which your sanding strokes go with the direction of the grain of the wood. If you sand against the grain of the wood, it may not show up until you apply stain or paint. Then you will notice ugly lines going across your piece. Usually it is easy to see the grain, it will look like fine straight lines running usually along the long part of the wood. Ideally, you should always sand with the grain, using progressively finer and finer grits. The best sanding method for minis is to use a small sanding block, which can be made from a small scrap piece of wood - you can wrap a piece of sandpaper (the same width as the block but longer than the block) around it and staple the paper to the top of the block. Depending on what you are doing, you also can lay a piece of sandpaper on a flat table top, and rub your wood over the paper. There is an old woodworkers adage to "take care of the middle and the ends will take care of themselves" - usually people tend to round over corners and such when they sand. This is especially true when you don't use a block. I do sometimes use sanding drums in my Dremel when I am trying to reduce a large area or do curved edges. These rotate in such a manner so that you can avoid the "swirls" that you get from discs. Belt sanders will also work to sand with the grain. I have never tried the small discs on a Dremel, so I don't know how well they hold up. I have used disc sanders in larger tools, but only for very rough work. Bonnie Gibson - Tucson, Arizona |
| Previous 10 | Next 10 Page 518 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |