Curtains: Serena Johnson makes wonderful curtains.

Bonnie Justice


Sandy's Lace & Trim: Sandy Staker, 7417 N. Knoxville Avenue, Peoria, IL. 61614
(309) 689 1943   Fax (309) 689 1942 http://sandyslace.com

Rosemarie Torre


Porridge/Oatmeal: I have done this... mix finely chopped rolled oats with two part casting resin. Add a little white gallery glass over the top for milk.

Charleen


Heart Shaped Bathtub: You might try a Canadian company named Model Builders Supply. They carry all kinds of items like this, modern tubs and such. Their web site is at http://www.modelbuilderssupply.com

Karen


Heart Shaped Bathtub: If you are interested in crafting one, look through the Valentine clearance shelves. I've seen items covered with a plastic heart shape. Cut off the excess, leaving a small lip, paint it on the OUTSIDE with red or pink paint, and set it inside a box-type framework. Viewed through the plastic, the painted item looks like porcelain. I've made tubs like this, although not a heart-shaped one. Now I wish I'd bought that item with the heart-shaped plastic cover!

Wanna in El Paso


Heart Shaped Bathtub: Sorry my heart bathtub suggestions weren't clear. Let me see if I can clarify what I was trying to convey. You know how in the olden days we went to the hardware store and bought a paper bag full of screws, and now they come in a package with a cardboard back with clear stiff plastic encasing the front of it? So much of what we buy nowadays comes in this type of packaging, and the shapes are infinite. Well, the plastic I was referring to was that type, used to encase Valentine somethings - I think either erasers or candy - and it was in a heart shape. I was suggesting looking for something similar in a heart-shaped packaging to make a tub. You with me so far?

If you look at a real bathtub, you will see that it has a lip, or rim around it. When we rip one of those packages apart, the plastic usually comes away with a fairly wide edging on it, used to glue it to the cardboard. When I said "Cut off the excess, leaving a small lip," this was what I was referring to; cutting away that wider edge, leaving a "rim." Also, there are freestanding bathtubs (more traditional), and there are those that are built-in (more modern). The area of the box that surrounds the built-in tub often provides enough space to set bubble bath, soap dishes, stacks of towels, plants, etc., as you will notice in pictures of modern bathrooms. I have a friend who cut a hole in the top of an old carved dresser and dropped a round sink into it for a very elegant look.

Basically, the built-in tubs are just a box with a hole in it for the tub to be dropped into. This was the box framework I referred to. When I've made these, I just made a box out of matte board and painted or finished it to match the walls or the tile in my bathroom. Whatever shape plastic I was using for my tub (oval for traditional, square or round for a more modern spa-type), I just set the plastic on the finished box, traced around the bottom, then cut out within that tracing and dropped the "tub" down into it. If one were lucky enough to find one of these pieces of heart-shaped stiff plastic, one would have to cut the hole in the heart shape, of course.

When I said "paint it on the OUTSIDE with red or pink paint," I was referring to what becomes the bottom side (outer part) of the tub when you drop it into its framework. "Viewed through the plastic, the painted item looks like porcelain," means when your tub is in place in its framework and one looks down into it, as one would look down into a full-sized bathtub, one sees the paint through the slick unpainted side of the plastic, which gives it a glossy, porcelain look. Of course, one could just make a free-standing bathtub, in which case the painted outside of the tub would look matte; the inside (unpainted side) would look glossy.

To get an idea of what I'm talking about, take a couple of clear plastic drinking cups or those clear plastic tops off a hair spray or similar bottle. Paint one on the OUTSIDE and look down into it, and the INTERIOR looks glossy. On the other hand, if you paint one on the INSIDE and look at the EXTERIOR, the paint shows through the plastic and looks glossy on the OUTSIDE. You have a choice as to which effect you want depending on which side you paint, but of course we generally prefer to sit down in a glossy bathtub, not a matte-finish one.

By the way, those small clear plastic tops make great wastebaskets. You can paint a simple Mary Engelbreit-style rose or similar design on the INSIDE, or place a small decal on the INSIDE, then paint over it, and get a glossy wastebasket (painted matte-finish inside).If one paints the OUTSIDE, then does the rose on the outside, too, one gets a matte finish wastebasket that looks glossy inside. And of course, you can leave off the flowers or other design entirely and just have a solid color one!

Wanna in El Paso


Lighthouses:  Both theme type and real type. there is quite a large list of items for a lighthouse at: http://www.bcminiatures.com/Lighthouse.htm

Mary Lou Prechtel of Middleburg Hts., OH


Heart Shaped Bathtub: I have been following this for the last few days and am amazed no one has suggested a porcelain heart trinket box.I have seen them with various designs on the side and they are from 2 to 4 inches across. Nothing to do but fill and if needed sand down the edges where the lid would fit.

Carol (jody)


Flags: this is an outstanding site for FLAGS - ANY FLAGS!!! history, origin, sources and loads of colorful photos! Best anywhere... American Flag & Gift http://www.anyflag.com/

Judie - Daytona Beach, FL


Cats Paw Doll Accessories
Pamela and Michael Lembo
336 Candlewood Lake Road
Brookfield, CT 06804
Tel:    203-775-4717
Fax:    203-740-8146
melembo@snet.net

Fine doll jewelry, brass accessories, brass hardware, and miniature trunks.

Judy Bayless


Previous 10 | Next 10


Page 520 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)