Repairing furniture: There are several things involved in repairing broken furniture. Lots of time it is more work than making an entire new piece. I'll talk about PARTS in this email.

MISSING PARTS: Do you have the missing piece?

If YES, then examine the break and dry fit it together first to see how it fits. If the fit is satisfactory, then glue it together. Sometimes you may need to drill a fine hole and insert a pin or small dowel to help with the mend. I prefer a good wood glue for this but it depends upon what you are gluing. Metal parts require an epoxy or instant glue.

Remember TACKY and SOBO are flexible glues. They dry flexible so if the part needs strength, use something that dries more rigid.

If no, then you need to find something to take the place of that part. Can it be propped up say on some mini books to add to the charm of the setting, or something placed in front of the broken part so you don't see it? If it is upholstery, can a doily or throw be added to hide the missing part? If the answer is still no, then you need to manufacture a new part. Use one of the remaining pieces to make a new one. (Here's where previous furniture making helps.) Find a scrap of wood and use the good part as a pattern. Remember to look at it from all sides. Then you will have to saw, whittle, or file to get to that shape. Or you can substitute entirely new legs, for instance, all the way around.

FIT: If the piece doesn't fit together right, is it just a case of misalignment? If so, you MIGHT be able to take the piece apart and reglue. I've had good luck with NON METAL containing parts to nuke them in the microwave for 10-20secs and then be able to pull them apart. Some parts will come off with vinegar or alcohol but that might also destroy the finish.

If the part sticks out too far, as a drawer, examine it to see why. Is there an extra piece inside? Can the back be sanded? Can the bottom?. Now if there is a big gap that is a different story. Additions show up unless you redo the finish. I prefer to camouflage with leaving the drawer open, stuff flowing out. A piece of a shirt sticking out the drawer, a cat's tail. Anything to add life!

Shannon Moore


Clay Gun: it just depends on what you're making. I've used it a couple of times making shapes for leaves, or for cacti. It's great if you want to create multiples of a specific shape, if that shape is available for the tube, such as cylinders, stars, leaves, etc. You can also make several shapes and combine them in interesting ways. But it has no use for free-form sculpting of things like faces, animals, etc.

Dave Pierce


Printable Vintage Crate Labels: After seeing the post about vintage advertisements on http://www.adflip.com

I got into searching for printable crate labels for my general store. I found a terrific site at http://www.labelcollector.com

Everything is organized according to what the label looks like. For instance, under Patriotic you might find a label for apples with a picture of the white house on it, or under flowers you might find a vegetable label with a flower logo. The pictures are for sale to people who want the FULL size label, however for us it's possible to right click and "save as". They may need to be re-sized for printing. I hope this is useful to anyone making some fimo fruits and just needs a nice vintage label for the crate!

Lynn Silvestri


Clay Gun: In order to use the clay gun, your clay has to be extremely soft or it will just bend the clay gun inserts. It is also hard to extrude the clay and you need a bit of leverage. The gun is very useful though. I use it in my book for making an assortment of things, my favorite being drain pipes and bathroom pipes. It also makes great pasta strands.

Mary Kaliski


Clay Gun: If you have never visited Maureen Carlson's web site - it is great.  She has all sorts of supplies, tips and classes for the clay artist: http://www.weefolk.com/ In her miscellaneous tool selection she has a great tool for the Clay extruders. Klay Gun Pusher-a home built device to help you push the clay through the clay gun. (the clays are sometimes very hard, especially Fimo) We also sell the design for the pusher, in case you want to make your own.  This costs very little, but is well worth it. if you ever have a chance to take one of her classes - she is a great teacher.  In one of her classes that I took she said that she did not like to buy Fimo clay to have shipped to her during hot months of the year.  They tended to bake in the shipping.

Her fingernail tools and toenail tools are great. Be sure you visit her collectible pages on her web site.  She makes adorable characters.  These are also found in many stores through out the country. Maureen is also the originator of the push molds that you see in the stores.

Mary Ann F., Frankenmuth


Making Hollow Vessels or Beads: As a part of preserving the ecology of our planet,  science has come up with a packing material that looks like the standard  pop corn packing, but this one melts.   Most of the "Pack and Ship" type companies carry it.  To check if you have the right type... just lick your finger tip and touch it to the puff.  It will instantly start to melt a little. To make beads, pots, or vases etc.:

1.     Take one of the packing puffs, and using an X-Acto knife, just carve the basic shape you want.

2.     Then prepare your polymer clay and roll out a thin sheet, using either a dowel or a pasta maker.

3.     Form a piece of this around the packing puff.  Be sure to leave an opening at least 1/8" across. This hole can be the mouth of a jar, or vase or the opening of each end of the bead.

4.      Bake the polymer item with puff inside at around 250=BA for 5 - 10 minutes.  You don't want to over bake these, or you could melt the puff. Check it after 5 minutes... if it feels firm enough to support its weight without the puff in it.. take it out.

5.      Let it cool off then place it in a container of warm water.

6.     The puff will begin melt out, leaving you with a hollow item.  You can help this process along by carefully inserting a thin needle or a small tooth pick, then turning it around.  This will help the water to touch all of the puff material inside.

7.      If you feel the polymer could use a bit more time in the oven, go ahead and bake a little longer.

Garnette in Lewisburg,  PA


Biodegradable Packing Puffs: For those of you that were interested in my post about making hollow Fimo beads and vessels, by using the biodegradable packing puffs that  melt in water:

I've found a craft source.  There is an article in the new April 2001 CRAFT magizine.  They list the source as Highsmith Corruboard... "Wet N' Set  Magic Nuudles".  They come in different colors, if you need  that.  The  free call number is:  1- 800 - 554-4661

Garnette Marlow in Lewisburg,  PA


Fixing finish on furniture: Hope I didn't deluge too many with my last post on fixing furniture. Now for another installment on fixing the finish.

Is the finish "in one piece", that is - is the color consistent, no bare wood? If so and you don't like the color or the glossiness, there are several things that you can do. To dull it down, really helps not make it look so cheap, spray it lightly with a satin clear coat. I've gone to the trouble to use steel wool, pumice and rottenstone to work on the finish, but the quick and dirty method of spray usually does the trick. A coat or two of neutral shoe polish also does wonders to help out a finish. You can always take the polish off with mineral spirits (paint thinner).

Color? Is it wrong? You usually won't be able to re-stain it as the finish won't allow you to apply stain over it, but you can apply color on top of that finish. Painting it a wood color works. Painting it white and wiping off most of the paint works. Experiment. I've used white acrylic as a wipe-on with great results. I've used burnt umber and raw sienna oil paint wiped on as a glaze and it works. I apply these paints let them sit just a bit but not dry, and wipe off here and there to have the old finish show through. Also try some of the faux finishes--make that old dresser with a scuffed top now have a marbled top. Had to replace a leg on dresser? Make it have painted legs and sides with a natural wood top and natural drawers.

Remember also, that all acrylic paints aren't created equal either. Some have more pigment than others. There are mediums that can be added to let the paint flow as opposed to water that makes it bead.

"But I need to match in this new piece that I made." That's a trickier one. Hopefully you've kept a scrap of the SAME piece of wood or other material from which you made the extra part. You can try matching the stains, try wiping acrylic paint as if it were stain, use shoe polish on that spare material. I've done and tried it all, well maybe not all, heehee. Each piece is different. If you are trying to match that ugly shiny finish <grin>, remember there is finger nail polish that works. Also those stains that are in magic marker type tubes are great for this as it gives you more control and less mess.

Shannon Moore


Shrinking Sculpey: You asked about how to bake Sculpey and keep it from shrinking. The only thing I can figure out is that you may be over baking it. I've only had shrinkage when it was left in too long. Remember that the time listed on the package is for larger pieces. Most mini's only need to go for 3-5 minutes. When I'm doing my critters, I make a wire frame, cover it with some Sculpey, and make the general body shapes. I bake that for about 2-3 minutes, even on the "larger" pieces, then add the details like ears, noses, etc. afterward, and re-bake. Haven't had any problems with shrinkage.

Dave Pierce


Repainting wire wicker furniture: You could try sponge painting your wire wicker with acrylic paints. I didn't want the white-white, so used a couple different shades of ivory. I was really pleased with the results . . . gave it more of an antiquey look with no globs or shine. Practice, practice. . .

Jude


Previous 10 | Next 10


Page 527 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)