Polymer Clay Uses: I know there's been a lot of discussion lately about the various clays, and for what it's worth, I will put my 2 cents in! I love all the Sculpey clays! The (original) white one makes good molds, most of the things I make are made from Super Sculpey (the beige one) or Sculpey Three (the colors). I also want to address the person who said that small things tend to break, there is a bendable Sculpey ( called Super Flex)as well. I use it for things like my dogs tails and delicate ears. It attaches well to the other kinds, especially if you use a dot of tacky glue between the parts before you bake them. Alice Zinn |
Try going over that with a dry brushing of gold or brown. Both give great affects.If anyone wants pics to see how that works I have some I can photo. Anita MH |
Polymer Clay Uses: As I've said before, first and foremost, I am a doll artist, and have used polymer clays for several years now. There are a multitude of clays and techniques that can work for you. I've also developed arthritis in my hands and have a very difficult time, but it is also a good 'hand workout'. Sculpey is a standard clay, but it's not very hard, is mushy, and not as durable as Fimo. It does have wonderful colors, but did you know you can mix Sculpey w/Fimo to get a stronger consistency. Fimo has a smoother finish, bakes into a more porcelain-like product, but is heck to get started. However, there is also a Soft Fimo, which is much easier to handle, and has the same results. My ultimate favorite, though is Super Sculpey - mainly because it's awesome for sculpting dolls - has a nice translucent porcelain finish. It's super easy to handle (kneads nicely), and can be blended w/Fimo or Sculpey for a variety of colors. If you're planning to start w/cakes & foods, I'd try the Sculpey/Super Sculpey blend, because if it gets too soft, it won't hold together, and may collapse in your oven. It's all trial and error. Some people work w/Sculpey exclusively, and have no problem. I think Sculpey is more for 'molding', and Fimo/Soft Fimo/Super Sculpey are better for actually sculpting/carving. Sculpey also makes a polymer clay called Premo, which is much like Fimo, but WORSE to soften, and the colors aren't so nice. Some people use a Food Processor to help soften/mix their clays, it's easier on the hands - if you don't want to do the 'bra' thing, just sit on it for a half an hour; it'll soften! Also, Fimo makes patterned (mosaic & floral) bricks and cylinders for bead makers - slice them thin, and you'll have some beautiful plates and tiles already "painted". Sorry this was so long, but that's my experience with clay. Doll Ladie |
Ripping Up Sticky Back Carpet: I would hold an iron over it - pressing lightly in order to release the glue and then rip it up. You are going to have some clean up of the old glue but it shouldn't be too bad. Sheena |
Fimo vs. Sculpey: You are right, all the clays have different properties. Fimo has the best 'memory' which means it is the least soft all the clays. This is preferable when making a figure and you do not want the clay to flatten under the pressure of your fingers. Sculpey is very workable and should be great for cakes. There is a Fimo soft and Cernit which are fine also. Both Cernit and Sculpey have a very good 'chocolate' color if that is the flavor cake you have in mind. Remember when mixing colors into white or transparent for a pastel frosting, using a lot of pale to a drop of color. Mary Kaliski |
Fimo vs. Sculpey: You can find a comprehensive overview on polymer clays (and resin) at my web site. Go to the second screen and "click" on MARY'S MENUS PROJECTS. Whichever clay you feel comfortable using is the right one for you. http://www.pannikins.com/ Mary Eccher |
Modifying Doors: You can modify door openings easily if the door is not already installed- If you want the frame size to stay the same, pull out the top pin hinge, add your extra wood and test fit your new door. When you are satisfied, insert a new longer pin through the old hole in the frame, the new strip of wood, and into the door. Use trim to cover. If you don't care about the frame height, just pop off the top piece, trim the two sides down and re-glue the top back on after you test fit the door. If the door is already installed, it makes it a bit harder to do. Carefully pull out the old door and remove the pin hinges. (If the door doesn't come out easily, you may break the old door or the top part of the frame and repair.) Cut the new strip that will fit into the frame and test fit. When the door seems to fit OK, take out the new strip and use a saw to cut halfway back through the strip at the exact spot the hinge is to go. (you are cutting with your saw on the side of the board that will face the front) Glue the strip in. Next, take your door and put in a new pin at the bottom and top. Put the bottom pin down into the original pin hole at the bottom of the frame. Slide the top pin into the groove you cut into your new strip. Use a tiny scrap to wedge the pin into the center of the frame. Glue a trim piece over the area to hold the pin in place and cover your additional strip. Bonnie Gibson, Tucson, Arizona |
Cups: A good way of making coffee mugs is to wrap a thin, pre cut piece of clay around a powdered dowel of the right width. Make handle out of rolled clay and cut bottom to fit. Be certain no powder gets on the bottom or it will not stick to the 'cup' part In my book Making Miniatures in Polymer Clay the directions are more specific for making cups and saucers, but this is the easiest method. Mary Kaliski |
Arthritis & Fimo: Kathy asked about "playing" with Fimo/Sculpey since she has arthritis. I have fibromyalgia and for whatever reason it affects my hands most of all. I've used Sculpey and the new soft Fimo and as long as it is fresh and I use a small amount at a time, I don't have any problems. I must have warm hands though, because I've never had to sit on it or heat it up in my bra - VBG. Oh, and it does tend to get mushy if you overwork it, so you probably won't always get the detail you'd like . . . but it's fun anyway . . . go for it! Jude in ND |
Barrels: One end of the barrels or maybe both were round pieces of wood that were inserted into grooves cut into the slats/staves before the rims were hammered down. They were filled with liquid from the hole in the side that was plugged with a cork, then later used for the tap. I don't know about "lids" for barrels that were opened for dishes and stuff. I guess the nails wouldn't have been so much of a problem. Peggy Bugg |
| Previous 10 | Next 10 Page 528 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |