Attaching minis to wall: There is a new product out that is called Kling Magnetic Paint. It is not magnetic itself, but when applied like a primer on a dollhouse wall it will hold anything magnetic. I've used it to cover the wall. Then I attach a tiny piece 1/32 inch thin strip of magnetic strip (with the peal off backing I buy at WalMart) to the mini picture back or quilt back. Presto...it stays up like magic and no spots or staining on the wall. The Kling primer even works through wallpaper for those of you who like to wallpaper the walls. It's great for being able to re-arrange items so easily...no messy tape or tacky stuff! I buy mine at Michael's in the pint size...covers lots of mini walls, but you have to special ask for it, as some of the stores have it ordered but not on the shelves yet. ==== More info on the Magic Primer and how I use it is here: http://www.geocities.com/Heartland/Hills/8157/products.htm ==== Pictures of one of my grand babies' personalized mini quilt is in the March 2001 Dollhouse Miniatures Magazine, with instructions on how I printed it to fabric. That's a carefully worded plug for the March 2001 "Printing to Fabric" DHM article, and I do thank all of you who have sent me the nice emails about the article :-) Wilma Kinder, in the beautiful SW MO Ozarks |
Quilling Supplies: Someone asked about quilling supplies and instructions. I have bought from Lake City Craft Co., who have some books on quilled miniatures at very reasonable prices. They were very helpful on the telephone, and shipped to Canada with no problems also. Web address is http://www.quilling.com Kay in Ottawa |
Door skin: Door skin (wood or sheet metal) is material that is placed on the face of a door. It usually is in sheets of 4 ft. X 8 ft. and the wood is fairly thick for mini work; perhaps in the area of 1/4". The sheet metal would be thinner but again in large sheets. DrBob...Delray Beach, FL |
World War II Posters on Raz's Dollhouse Pages; http://www.toad.net/~raz/memory.htm Rebecca in Vegas |
Seaside Shop: Thought I'd let you know how I finished my seaside shop. I made it in a plain roombox, plywood. The shop itself gives a different feeling than norm, as you really feel like you are standing in the middle of the shop as there is a false window and door at the back. Through the window is a scene as if you were on a fishing dock. I scored the outside of the box so that it looks like planks, and then put colours of wash on it. For the frame, I crushed barnacles which I had collected in California, applied glue to the frame and pressed it into the crushed barnacles. I glued only 3 sides of the frame together (sides and bottom). I glued the top edge to the glass. If I need to get into the shop, I can just slide the glass up, but when it's in place it looks like it's completely framed. My frame happens to be flush with the bottom of the box, but if yours is not, you can just put blocks of wood, or 'feet' on the four corners to raise it. If I had to raise it a bit in a seaside shop, I think I would make it look like pilings! Jonesy |
Orange juice carton pulls: On 1/2 gallon orange juice "cartons" under the cap there is a white pull tab to assure that the o.j. hasn't been tampered with. Cut the ring off the tab and you have a small plate or bowl! Glue the ring to the bowl and you have a modern overhead light fixture for a room which is not electrified! I have used this in a breakaway box where I used the lid as an extension of the room with a fireplace in it. Joie from NC, now in FL |
Bowls: Having a clean out today and I found some old hair rollers. These are the ones with the elastic and a plastic ball at the end. If you split the balls you get some very nice little & medium bowls depending on the size of the roller. Fill the hole where the elastic was I guess with air drying clay and you could sand the bottom a little to flatten or make a rim from clay paint and there you have it, a very cheap bowl. Melinda from Sydney Down Under |
Printables: New Printables New printables posted this week: Lisa Vollrath |
Round beehives: At our last club meeting, one of our members presented the workshop using one of those beehives. The beehive was poked onto a thin dowel which fit into a medium-sized clay pot filled with air-dry clay. I painted the beehive and pot yellow, then used a stain to weather it (came out nice honey-color!). The dowel was just stained. The base of the pot was filled with green railroad landscaping foam (three colors mixed). The flowers were made from yellow five-petal punches. Mine was a little different from the others, who just mounded flowers on their pots. I happened to have a mini sewing kit in my purse so got out a length of green thread, pulled it through some glue, then through the foam, and made vines which twined up the post. I used my black Sharpie pen to poke into the petal to cup it (pad was folded paper towel) - black-eyed susans. The entire pot then was surrounded by a little section of white wooden picket fence. The whole effect was great and very inexpensive. We're all struggling to make bees and will compare our efforts at the next meeting. Anyone have suggestions on bee-making? Wanna in El Paso |
Printables: I did a bunch of printables this week. I like to do them in batches so I can print, spray and seal them. I discovered that if you put a fairly heavy coat of high gloss sealer on the card stock it looks and feels kind of like leather. I used a sponge brush to apply it after I had sprayed on a light coat of sealer and allowed it to dry. This is to keep the ink from running when I use the brush-on sealer. I made some paper dolls and gift boxes that way also. Rebecca in Vegas. |
| Previous 10 | Next 10 Page 531 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |