Working with Fabric in Miniature: Someone recently asked about the best fabrics to use for miniature work. I'm not an expert, but I'm sure a lot of you will agree that small scale 100% cotton fabrics look best and are the easiest to manipulate. There is a mini pleater available, but in my opinion the fabric looks too rigid when you're done. If possible, I like to use a product called Stiffy for arranging pleats and folds. Also, extra thick tacky glue used sparingly works very well. (It's important to eliminate bulk in miniature, and gluing is often better than sewing.)

Pat S.


Mounting Cross Stitch as Back Drop: I did something similar for someone years ago, and it turned out well. This is what I did. Finish off your cross stitch. Block it to shape. Take a piece of THICK card e.g. mount card that is the right size for your room box, just a bit under, as bear in mind your cross-stitch fabric will go over the board, hence making it wider/taller, Stretch your cross-stitch over the card, putting the excess fabric to the back. On the reverse with stout thread sew backwards and forwards from side to side, pulling tight the fabric. You could of course glue it, but that scares me in case it mars the embroidery by seeping through to the front. You could use Bond A Web/Wonder Web to make the embroidery stick to the mount board.

Helen from York, England


New Coverlet Pattern Book: Well, believe it or not, I finally finished up my 2nd book of cross stitch coverlet patterns. I think it took me longer to get my computer and printer to allow me to make my own color covers than it did to design the patterns! But I've managed it and have posted pictures on my needlework page of the patterns in both my first book and this new book. The pictures are just a portion of each pattern, not the whole thing. But if anyone is interested, you can take a look at http://www.angelfire.com/wv/minipix/needleworkpage.html

Mary Lynne in Huntington, WV


Pretty Pleater Tips: First, make sure that the fabric or ribbon you are using is cotton or silk. Synthetics are very stubborn when it comes to pleating! Then you either wet the pleater, or the fabric, (by spraying or dipping it). Start pleating by pressing the fabric into the furrow on the pleater, with the little plastic card that comes with the pleater. (If you didn't get one, you could use an old credit card) Press the fabric in well, and hold it with the card, while you use the second card to make the next pleat. The fabric should stay in place if it is wet. (You could also use spray starch to wet the fabric or ribbon.) Continue pleating, using the cards alternately. If you start to go diagonally on the pleater, just use the edge of the card the gently nudge the edge of the fabric back into line. Don't try to take the fabric out of the pleater until it is completely dry.

You can either use an iron (over a cloth), or a hairdryer to speed up the process. But you do need patience! When it is dry, you could iron a piece of iron on interfacing to the top edge of the pleats, while the fabric is still in the pleater. When you take it out, the fabric should look like one sided corrugated card, and you can press the pleats whichever way you want them. Or, alternatively, you could run a stitch along the exposed edges of the pleats (before you take it out of the pleater) and use that to control the pleats.

Alison from Accrington. UK


Modern Bathroom Fixtures & Kitchen appliances: There is a Canadian company (even better eh? Canadian dollars!) that makes just what you wanted. Brooke uses their work. It's called Model Builders Supply. Their address is 40 Engelhard Dr., Unit 11, Aurora, Ontario L4G 6X6 They have modern bathrooms (check out Brooke's Luxurious bath) and kitchen pieces. At a great price. Phone is: (905)841-8392 fax is (905) 841 - 8399. I've used their modern bathroom pieces with my wicker and just lately have done some wicker microwave stands using their microwave kit on them. They also have some ¼ scale items. I'm sure Noella could fill you in more on them. She's the one who introduced me to them.

http://www.modelbuilderssupply.com/

Debi in Quesnel


Pretty Pleater Tips: I have something to add about using the pleaters. I have had much better luck using many small sticks...wooden shutter slats work great. (When I tried using just one or two small plastic cards, the material would always pop out of the valleys that I had already done.

Also, as I go, I pin down the fabric, which helps keep everything in and straight. (Start with a piece of cardboard with plastic wrap covering it to keep it from warping from the wet material...lay the pleater over that, then you have something to pin to.)

Kaye in L.A.


Satin Coverlet: Mary Lou asked whether she should quilt her satin coverlet or not. There are just as many reasons to quilt as not to quilt. What are you trying to achieve would be the best next question. If it is a duvet cover and the quilt is to give the impression of, for example, a feather bed (down comforter) then quilting it would not be appropriate and other means of holding it down would be in order. On the other hand, if you are trying to achieve the effect of a hand-stitched solid quilt, then by all means quilt it. If you do quilt it use a very fine thread such as machine embroidery thread (I use this to sew my mini quilts with too as it doesn't bulk up so much) or silk thread (harder to work with but very fine).

Ana Gerard


Braided Rug: I made a mini braided rugs years ago, still like new, by braiding embroidery floss, changing colors to give a pattern, cut a circle of muslin, that I starched, and carefully starting in center glued the braid down , to size I wanted. Takes awhile to braid, but worth the time

Alice P.


Lycopodium: I have seen lycopodium in the catalog for Hobby Builder's Supply. They may have it on their web site at http://www.miniatures.com

Linda in GA


Braided Rug: Take embroidery thread, variegated, braid three strands, make a cloth or felt backing the size you want, coil the braid from the center after you put craft glue on the backing, coil around and around until done. Let dry, trim extra backing off. I also take variegated yarn and don't braid, it looks really good like braids if the variegations are close together. I have done several of both kinds. You can also put your glue on a waxed paper, metal, or plastic sheet, coil rug, and let dry then peel off the rug, looks like a rug coated with non slip on the back side.

Rhoda Conley


Previous 10 | Next 10


Page 537 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)