Scale of Printables: If you're not sure that your printables are coming out to scale, go to Jim's Dollhouse Pages at: http://www.printmini.com/ He has a "Scale Calculator" that I'd be lost without. Garnette in Lewisburg, PA |
Sealer for printables and wallpaper: There are probably many spray coatings that work but I use Design Master Super Surface Sealer, Clear Sealer and Satin finish. Most craft stores have it. Use several coats letting dry in-between coats. The first coat should be very light. This puts a beautiful finish on printed wallpaper and printables printed on your ink jet printer. It is best to spray outside or in a very well ventilated area. I use a large cardboard box opened up and folded and taped into a stand type thing. This way you can do several pieces at a time. . Pin or tape the pieces of paper on that, carry it outside and give it a spray and then bring it back inside to dry. It is better to spray the whole pieces of paper with several coats letting each coat dry for about ten minutes, let dry overnight, then cut out. See my Printie Projects at http://printies.homestead.com Barbara D |
Printing on contact paper; Contact paper is a form of plastic. Regular printing ink will not adhere. Either use an ink made for plastics (it is made for printers on a commercial level) or prepare the surface of the Contact paper to receive the ink you have. I cannot tell you what to do for that. Sorry. DrBob, Delray Beach, FL |
Ceilings: I have a great way to do the ceilings ... I went to my local Ames Department Store and bought a product called Clear-Tex it's made by DecoArt. This product is a mixture that you add to your paint and as you paint the ceiling it adds texture , so that you can't see the brush strokes, I also went back over the freshly painted ceiling and patted in an orderly fashion this helped to not have a specific pattern. You add whatever color paint you want, it works very well. I originally bought it for the kitchen ceiling , but I think I'll do all the ceilings with this product. Charlotte |
Ceilings: I recently did ceilings by cutting piece of poster board to fit the ceiling (actually used the floor, since it was the same and the house was already built), then mod-podging pieces of lace paper doilies, then painting with white acrylic gesso before gluing into place with tacky glue. If you did it before the house was built you could glue the paper doilies directly to the ceiling after priming and then paint over them with gesso, that would be easier. The hardest part was getting the poster board to stick to the ceiling, I had to stand there and pat it back into place until it was tacky enough to stay on its own. I think someone on this digest posted the idea of using the lace paper doilies to imitate the fancy patterns of old plaster ceilings. Actually, hardly anyone ever sees the ceiling of most houses. SUSAN AT WRH |
Shingles: The neatest way I have found to finish the roof is to buy a piece of corner angle wood molding- it is shaped like an "L" with both legs the same size - basically just a right angle. You can get the slightly more expensive thin variety at dollhouse shops or the thicker cheaper stuff at the hardware store. Paint it white, stain it, paint it to match the color of your exterior walls, but in any case glue it over the top of the peak covering part of your last row of shingles for a more finished look. Bonnie Gibson - Tucson, Arizona |
Shingles: You can 'lace' a row of 1/2 shingles along the ridge (place them on alternate sides as you go, so they overlap). You can take two boards and glue one on each side. Most mini shops will sell you a pre-made ridge board (its an angle like corner trim) made of cedar (from Alessio). Tom Berkner |
Dying wood and Frottage faux finish: Several years ago (and I do mean several), House Beautiful had an article on using Rit dye to stain full-size furniture. The thing to remember: SEAL it or you will have Rit dye places you don't want Rit dye. Don't see why you couldn't brush it on your walls. Or mix some oil paints with glazing medium and use that. Oils come in wonderful colors. I love Prussian Blue. Someone asked for the Frottage directions from BHG paint decor magazine. Supplies: 2 latex wall colors (light Ivory and a tan or beige color three shades darker than the Ivory) Latex glazing medium Floetrol (extends drying time) Paint pan and roller Newspapers Large disposable container with lid for mixing and storing glaze medium Paint wall with lighter color. Let dry 24 hours. Cut newspaper desired size (for stone block about 7x12"). Mix enough of formula to cover area to frottage so color is consistent. Glaze: 1 pt. darker latex paint 1 pt. latex glazing medium 1 pt. water 1/4 cup Floetrol Apply glaze with roller to 12x12" sections. For more texture apply thicker coating of glaze. Apply clean sheet of newspaper to wet glaze. Smooth out newspaper carefully. Don't tear it. Wrinkles are ok. They add to the final texture. Remove the newspaper and discard. Continue with a new piece of newspaper. Always be sure there is wet glaze beyond the newspaper to avoid starting and stopping spots. To create stone blocks leave about an inch of space between newspaper applications for the "faux" mortar. These are the directions for a full-size wall. Tiny pieces of newspaper could be substituted for the large sheets. 3/4"x1" maybe? quinn |
Staining: If you seal a piece of furniture, you wont be able to stain it because the stain won't sink into the grain of the wood. Pick the color of stain that you would like and stain several pieces of scrap wood, wiping off the stain at different times, e.g.: 1 minute, 2 minutes, etc., until you get the intensity of color you want. Make sure you allow at least 24 hours for the stain to dry before applying any seal coat of polyurethane if you so desire. Then rub with 0000 steel wool to get a smooth finish. Spencer |
Fabric for Wallpaper: I used fabric for wallpaper for the first time on this. It was a wonderful remnant I had found at my flea. I took the fabric and ironed it. Then used 3M Super 77 spray adhesive to adhere it to heavy card stock. Then I made templates of my wall sizes and used them to mark the patterns on the prepared fabric. Cut with an X-Acto and then installed them on the walls with Yes glue. I tape wired prior to the installation and measured where the tape line was so I had no trouble installing my outlets through the card. I really like how the fabric looks and it was such a "mess-free" way to do the walls. John Medeiros |
| Previous 10 | Next 10 Page 555 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |