Pleating Drapes: I make my drapes for free. I use cardboard, the thick kind packages arrive in the mail in, and straight pins to make my pleats on the cardboard, then spray them with hair spray, let them dry, and when I remove the pins, the drapes hold their shape.

Sue


Pleating Drapes: Before I broke down and bought the pleater, I pleated many-a-drape, curtain, and vanity skirts using the pin method on graph paper and hair spray. The curtains I did for my "big house" were made over 10 years ago and they are still pleated perfectly. They have been even been hanging upside down while on the rod while the room was upside down being electrified and settled back in shape nicely when right side up. I can say that I like the pleater and have used it a lot since I bought it. I have the 1" and a friend has the smaller one, so we share!

Fay


Cross Stitch Kits: Go to www.weedarlings.com and click on cross stitch kits. She has kits for pillows, quilts, rugs, tea cozies, Xmas tree skirts. I've ordered a few of these kits and they are quite nice - and delivery is quick too!

Paula


Cross Stitch: This web site has dozens of links to free cross stitch patterns. I simply do the patterns on 36-count or 40-count material to adapt it for miniatures, or stitch only part of the pattern. I do the full X because I think it looks better, and I can tell the difference. http://powerup.com.au/~sheal/freebie2.html

Pat


Bed Skirt: I needed a bumper pad and bed skirt for a baby crib and found an easy way to make it. I bought some plain cotton ruffle and attached it to the mattress so that the top part of the ruffle (the plain straight part that you would sew) stuck up a little bit above the mattress, then the ruffle hung down like a skirt - very easy.

Carole Pierce


Flocked Wallpaper: Lay 'velvet' on top of a doily or something else with a raised design, spray with fabric starch and iron heavily. The nap will stay raised where there is no design and flatten where there is a design.

Anne Gerdes


Ribbon roses: Here's a sneaky way to get pretty little roses every time. Just about all the stores we haunt carry ribbon roses. A little big you say?? Look at the base, find the end and begin to unravel till you have the size you want. Trim off excess and put a dab of glue. Voila! Twelve beautiful ribbon roses in minutes for about $1.00.

Dina Watts


Wool Felt: For a small piece of wool felt, visit you local Podiatrist he/she may have some in thickness up to 1/2." This can be pulled apart into sheets of any thickness you desire.

Bob


Wool Felt: If you need discontinued or special fabric, try the local goodwill or Sally Ann shops. Whenever I'm looking for fabric I need for my projects, I can usually find it among the racks and racks of clothing they have (sparkly, brocade, silky, velvety, etc.). You end up with masses of material for a few bucks.

Susan


Dressing my blue silk mini bed: Several folks have written and asked me how I made my bed. I thought I'd post how I did mine to the list. First I bought a copy of the book Judy's Beds. It was under $10 and very worth the money. The book has lots of templates for making spreads and canopies and pillows. But for the life of me I could not follow her directions, maybe it's because I'm just a basic beginner at sewing. But what I did was use her pictures as directions and followed her that way. I had to modify things a little because I dressed my wooden bed, and her beds are made of ceiling tiles with applied headboards and posters.

Here's what I did:

I bought the 1/2" pleater by D. Anne Ruff http://www.danneruff.com and it has really come in handy, well worth the money. I used 1/2" foam and doubled it for a mattress that I sewed together, got the foam at a carpet place, they sell it by the yard if I'm not mistaken. I cut and folded over a hem for the dust ruffle, then sewed on some tiny flat lace to that, used the 1/2" scale pleater for the dust ruffle and glued it down.

I measured the bottom of the bed and cut a piece of cardboard that was 1" shorter than the length of the bed. This allowed me to have room to push the bottom of the spread down between the foot of the bed and the mattress.

Then I cut a pattern for the spread out of typing paper, and tried it out on the bed to see if it would fit, then took that and cut a spread and lining. I sewed the spread on the machine using a zigzag stitch with some thin flannel batting with a cotton lining. Then gathered lace twice as long as I wanted it for one side, gathered it and sewed it on by hand, did the same for the other side and the foot.

Then I took about 1/2" dowel and cut that to size for a bolster and covered and glued flannel batting to it and let it dry. I knew the ends of the bolster would have to have a folded hem, so I measured the fabric and cut it out. Then I sewed the fabric by hand to the bolster and turned over a hem on each end, then used a blind slip stitch and gathered each end, then glued the bolster to the bed.

The bows were easy to make once I played around with an idea of using 4 straight pins that I stuck to a vinyl placemat, 2 pins in front of 2 pins. The front two pins were closer together. I taped down one end of the silk ribbon on the left side, and then wove the silk streamer around the back two pins, then brought the streamer around to the front going around the pin on the left, then wove it through to the pin on the right and taped down the end of the streamer. Then I took needle and thread and went straight through the center to the back, then looped the thread totally around the center of the ribbon, stitched the back a few times and took the pins out and glued the bow on the pillow. I'm sure my instructions are about as clear as mud with these bows!

The pillows have the 1/2" foam in them that's been beveled on the top and then covered and stitched two times round on the machine. Tacky glue was then applied to the front and back of the stitches on the pillows, and then the material is trimmed fairly close. The bows were glued down on the corners of the pillows with the tails waved a bit. The silk ravels so badly, so I ran a bead of tacky glue along the edge of the fabric and let it dry, this really kept it from fraying. Pillows were 1" square and lace was twice the total length of each pillow and then gathered.

I glued just about everything down, except the lace on the spread. I glued just the points of the lace down. The bed was easy to make, I had seen so many gorgeous beds that looked like they were so hard to do that I was fairly intimidated, but believe me if I can dress a bed, anyone can do one.

Take a look at my mini bed here:

Photopoint Album

Sue in VA


Previous 10 | Next 10


Page 575 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)