Draping Bed Linen: Spritz the bed covering (on the bed) lightly with water, then wrap a strip of cloth around the whole thing, tie or pin the ends, and let it all dry. When everything is dry, remove the cloth strip. This has worked well for me with woven cotton coverlets and with quilts (just 2 layers of cloth). It should work with other natural fibers, too, but I would test a little scrap of silk to make sure it doesn't spot or run. Vicki in Pasadena, CA |
Draping Bed Linen: You could use Stiffy or other fabric stiffener and drape the bedding over plastic fild until dry in the shape you want. If it is a quilt put either sand or a little lead shoyt in the edge channel. Another way is to thread fine wire through the edge and mould it into shape. Roberta |
Forming Fabric: Rather than fuss with starch and hairspray, try using plain old steam. This way you don't have to worry about the type of fabric. If you can pin the fabric to the mattress above the wood and then steam, you'll be surprised how well it stays. Just stick the pins straight in (like a nail in the wall) a quarter inch or so. Remove pins after the fabric is dry. And I've said this before, you can buy a small steamer at places like Walgreen's and Walmart for around $10 so you don't have to use your iron which is often too awkward for steaming minis. Mary Kay Gentile |
Draping Linens: to add yet another method of draping fabric as in bedding... use a VERY fine wire in the hem....the wire that you can pull out of the edge of French Ribbons works well. The edge can then be shaped as desired. You can also add this wire into the first row, edge stitches of a crochet or knit item. Just remember it has to be very fine to work. (I saw a gal on TV knitting with 26 gauge gold wire to make jewelry, but wouldn't want to try it myself.) Sammy |
Draping coverlets and quilts: I had the same problem with my quilts as they were quite thick. I found that the easiest solution for me was to sew it on taking huge stitches from side to side under the bed. The stitches only go through the underneath layer of the quilt, about half an inch from the edges of the sides, and it would only work if the quilt falls below the base of the bed or the stitches would show. The stitches can come out in a jiffy and there is no risk to the fabric. Lynne (Mini-Mum) |
French Knot Carpets: I have done a couple of pieces in French knots. You will need some plain white cotton fabric, embroidery cotton, good sharp needle and a design. Your knot size can be controlled by how many strands of floss you use. The smaller the knots, the more intricate your design can be. I like about 2 strands. First, you make a pattern on paper and figure out colors and balance of the piece. To transfer your design to the fabric, put fabric into an embroidery hoop and get it as taut as possible. Then flip the hoop over and lay the flat side on your paper. If you can't see the design through the fabric this way you might tape the pattern to the window and trace from there, or use a lighted table if you have one (flashlight under a glass end table would probably work mostly as well). I like to work with the hoop "the wrong way up" because I find that the fabric doesn't get pulled loose as easily. To ease the needle through the fabric, you can use beeswax to prime it. Also, I have found when I make a rug in this manner, sometimes the needle stubbornly gets stuck. I like to pull it through with pliers, which takes away the danger of your hand slipping and you forcing the needle through a finger. Kim From Canada |
Weighting Fabric: I weight everything I make from fabric. Taking the sand filled pillows one step further, I put a line of sand into a pocket on the trailing edge of everything. Bedspreads, curtains, furniture skirts, etc. If your fabric is limp and thin (which I'm sure you strive to achieve), then a thin line of sand will allow it to drape nicely. Even pounded fishing weights (split shot) is good. Anything heavy that will not show. Split shot clamped to some hidden threads behind the drapes is excellent. They rattle a bit against the wall when moved, but hopefully that's not a problem. I also attach a small fan to some of my 'open window' things to make the curtains billow and plants to wave. Sure adds life to an otherwise static room. Judie in Daytona Beach, FL |
Gold Leaf: I was in error about spraying the gold leaf with sealer. The Icon is sprayed to seal it BEFORE the gold leaf is applied. Deborah |
Quilters - Mini and Otherwise: This will be of interest to quilters - both mini and full-size. A while ago I got a book called Easy to Make Dollhouse Quilts by Janet Wickell - cost $3.95. All of the quilts in the book are "foundation pieced" and I wasn't sure how I would transfer the patterns to a foundation fabric. I bought a package of "Fun-dation - Transparent Quilt block Piecing Material". Now it said on the package "convenient 8 1/2" x 11 size runs through your computer printers". It ran through my Epson printer like a sheet of paper. The pattern is printed so clearly and the lines are really fine and clear for stitching. It is absolutely the most amazing stuff. I don't often get that excited about products but this one is really super. Paula in NJ |
Making bedding stay down: When I make my mini bedspreads and quilts I put a small piece of ordinary tin foil in between the top and the lining. I cut the foil about ½ inch smaller all the way around than the lining. No need to glue or sew it into place. Just sew the top and lining together (wrong sides facing each other), turn the bedspread right sides out, press and slip the foil in like putting a letter into an envelope. Then slip stitch the opening closed. It makes the coverlet lay nice and flat and you can bend it down at the sides. You can turn down at the top corner to reveal any pretty sheets underneath and pleat it. Leslie |
| Previous 10 | Next 10 Page 576 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |