Tissue Wallpaper: Experiment with tissue paper to see what you can do with it. I used a pieces of gold tissue with a muted gold leaf pattern on it to create a wall paper. The piece was very crumpled so I crumpled it some more. Then I used my regular iron set on low (and dry) to smooth it out. Attached to the wall (which was actually cardboard in a frame) with spray adhesive and smoothed out with a brayer. A few wrinkles were simply rolled flat and added to the very antique look. Then several coats of decoupage medium and it was finished. Looked wonderful.

Marcie


French Knot Rug: I have made one, but only one. I decided to use just one strand of floss to work my knots and I'll tell you, it takes a LOT of knots to do this if you use only a single thread. I just drew a "folksy" cat lying in the center of concentric ovals and set into a border of a solid color with tiny flowers in each corner. I started in the center filling the cat with tiny French knots. It took a billion knots to finish this rug - well a lot anyway, but it came out just lovely. It only measures 1" by 1 1/2" because I wanted it for my 1/2" house. I made the border in white. Then I dampened it in order to block it. The black ink that I had used to draw the design ran ( I thought it was a permanent ink, WRONG!). So now I have a gray border and have learned about what not to do if I ever make another rug. ( When pigs fly!) If you use two or three strands of embroidery thread, your result will be lovely. This technique exactly reproduces the look of a hooked rug. You can draw or copy your pattern (using permanent ink) onto light muslin and leave enough fabric around the design so that you can put the whole thing into an embroidery hoop. Work out from the center to the edge filling in the smallest design elements first. When completed, leave your rug in your hoop and "paint" the muslin around the edges of the rug with diluted glue or fray check. Let it dry. Cut around the rug leaving a narrow border of muslin, then turn that muslin border to the back of the rug and glue down. You can make chair pads using this same technique. Oh, by the way, after I'd made my rug, I read that hooked rugs weren't used before the 19th Century in America, and wouldn't you know it, my house is "set" in the 18th Century. So I decided to think that my "homeowner" was a woman ahead of her time, and I used the rug anyway. And I never want to see a French knot again as long as I live.

Darlene from Long Island


Iron-on transfer paper: In one of the digests there was a thread about using iron-on transfer paper - with the complaint about it being shiny and stiff. The best way to solve both those problems is to "hot peel" the transfer, rather than waiting for it to cool. Also, after removing the transfer, you can wait a minute or two and then use a piece of plain white copy paper as a "pressing cloth" and go over the transfer again. It will eliminate a bit more of the residue and helps to keep the fabric soft. Just be sure to peel it right away also.

Candy_B


Cornices & drapes: d.Anne Ruff makes wonderful drapes & cornices. You can also buy her kits, fabric etc. She has "Pretty Pleaters", which you use to pleat the drapes. Her web site is: http://www.danneruff.com/. Great pictures for ideas.

I've also seen instructions & patterns in various miniatures books using foam core for the cornices. You could check out your local library for miniatures books.

Kathie


Painting Plastic: Spray the plastic with Krylon sandable primer first. Make sure the acrylic paint you use is slightly watered down. This way it will leave no brush marks.

Mary Kay


Rugs: I have done cross-stitch patterns on fine mesh - very nice. Embroidery thread braided (white and two colors, or variegated) then either coiled and sewn on the backside or ironed onto that sticky fabric works great but I think the rug turns out a little thick. And of course, Petite-punch for hooked rugs. The designs can be very intricate doing it this way. Tried doing an actual latch hook rug with a tiny latch hook once. The hook is made for pulling snags to the back on clothing. Like I said, I tried it once.

Sandy in WA


Painting Plastic: Try using a product called Kilz on the plastic before attempting to paint it. I believe it comes in a spray version, but if not the brush on will be fine. You can find it at Home Depot.

Pam


French Knot Rug: I did a rug in French knots and it turned out really nice. It was for my neighbor who had a six foot pea pod rug from Pottery Barn. I made a 6 inch replica for her dollhouse. It was very easy and turned out to look almost exact. I actually did it on muslin then I used a piece of thread lock fabric in the same shape on the back (for finishing) tucking in the ends. Recently when doing a braided rug I used "Ailene's o.k. to wash it glue" to adhere the braid to the fabric backing and that allowed me to trim very close to the edge and I think I'll use that for the next French knot rug. I used silk ribbon that I use for embroidery. It is so forgiving, I worked the outline then worked the inside. It turned out better then I thought.

Natasha


Painting Plastic: Try washing the houses in hot, soapy water.

Diana


Miniature Fringe: For fringe on any rug (or furniture), buy 1/4" grosgrain ribbon in white or ecru at any fabric store. Cut it down the middle. Holding the braided edge, I use a needle to pick off all the lengthwise threads up to the braided edge. Voila . . . fringe. Using a tacky glue, attach it to the end of the rug wider than you need. I do this flat on wax paper as it doesn't stick. When dry, trim each side as necessary. Cut the width you want before pulling threads as its difficult to cut a straight line through all the little threads.

Ruth, Grass Valley, CA


Previous 10 | Next 10


Page 577 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)