"Braided" rug, Twisting Floss: With all the talk about twisting threads with your Dremel reminded me of what my mother used to do. She bought a mini manual hand drill, about 9 inches long, and fit a cup hook into it to loop her thread on as it twisted. I hope that makes sense :-). A year after she figured this out, Joann's started carrying the exact same thing made "just for" cord twisting (but hers was about $10 cheaper!). I have also seen it in the Mary Maxim catalog, although not recently. Just a thought.... Sarah from Central Iowa |
Twisting Floss: I believe years ago one of the miniature magazines (I *think* miniature collector) had a how-to of making the cording with strands of embroidery floss and a small electric batter mixer. It involved tying one end of the floss to the mixer, the other end of the floss to a drawer and turning the mixer on. You stopped when the cord started twisting around on itself. Then you twisted it evenly, and glued the ends. To cut a piece you determined how long you needed, glued that end and then cut through the dried glue. This way you had a fairly long piece of cording all ready made up for you. I used the method to make cording for a project when the craft store was only carrying gold and silver stuff and it just didn't match my pink theme! The thickness of the cording depends on how many strands of floss you use, and you can intertwine different colors to get a more intricate look. Kim From Canada |
Twisting Cord, another way: Get a friend to hold the other piece of cord, both of you stand at each end and twist in opposite directions, but before you do this, tie a pencil in the approx. middle of the length of cord then start twisting. When completed the twist and it is as tight as you want it, then meet in the middle where the pencil is, one of you take all the thread and it will twist beautifully. I have used this method for making the rugs, but it is a patchwork/needlework technique which we use for making cords for gathered bags etc. where you thread a cord through and gather it up. Pauline |
Twisted cord: This is the same method I use for making cording to finish off upholstery. Years ago there was a wonderful artisan that made custom modern furniture. You would send your fabric and she would first pull some threads from it, then upholster the chair and use the pulled threads in the twisted manner to create the cording around the cushions. This is the most perfect upholstered furniture I have ever seen. She died some years ago I believe. Her name was Sally Hardy as I'm sure many of you remember her. Fannye in TX |
Mounting Board Warning: There have been a couple of mentions lately about using the adhesive mounting board for finishing needlework, and it has slightly bothered me, so I must send this comment. I used to use this adhesive backing all the time to mount my full sized needlework, because it really finished it off nicely. But then an accomplished needle worker whose opinions I really valued, (but whose name I can't recall,) told me not to use this stuff because in time the adhesive on the board has a chemical breakdown which causes it to change it's properties and leach through the fabric of the needlework and cause ugly stains and/or discolorations. Needless to say, I stopped using it immediately, as I put a LOT of time in my work and would hate to see it ruined by something I could have avoided. But on my miniature needlework, particularly rugs, I am not terribly fastidious about washing the finished product, or worrying about keeping it absolutely clean, as I want the things in my dh to look slightly used & comfortable. Of course, if I was displaying them for sale, that would an entirely different situation. I would want them to be at their best possible appearance, & if the buyer wants them to look slightly dusty & used, that's her choice! Ann, in California |
Mounting Board Warning: Thanks, Ann, for mentioning NOT using the adhesive mounting board for finishing needlework. As a dealer of rare books, I have come across too many books and prints ruined by acidic glues, papers, etc. Also, having made miniatures for over 30 years now, I can see that using some other materials or supplies have caused bad results after a long time. Every now and then I ask other 'old timers' to pipe up about such things, so newbies won't make the same mistakes and see hard work go down the drain in the future, or at the very least, mar the good looks of a handmade item. Glues that come through fabrics to make ugly stains, fabrics themselves that 'self-destruct' (such as the velour type blankets that look so lovely but have a foam core) and oil based paints on polymer clays that never truly dried, nail polish coats that yellowed or cracked, 'rubber' dolls ruined by contact with some plastics, and such things are so upsetting when seeing how otherwise nicely an item was made. Such advice can be ignored, of course, but for those who put a lot of love and time into their creations and intend to keep them forever, I am sure it will be appreciated. Rose |
French knot rugs: Unbleached muslin works fine for French knot rugs. EVERYONE in Joann's should know what that is! Martha Simpson Nock |
Percale: For the younger people out there - every Joann Fabrics has percale – lots and lots of percale. They usually have a whole wall full of prints used for quilts. That's percale. If you're making a French knot rug, you probably want a plain color, not a print. I can't remember what they call it these days, but it's on the same wall as the prints at Joann's. Any cotton the same weight as the percale prints will work. Nancy Norris |
Percale: Percale is a cotton fabric used in sheets, shirts, etc...I use pieces of old sheets for rug backings. Jo |
Percale: Fine cotton broadcloth is a good substitute for percale. Alice Zinn |
| Previous 10 | Next 10 Page 586 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |