Cutting Plexiglass: To cut plexiglass the best thing to use is a table saw. To do this you need to put a cutting and drilling liquid on the blade. This is a product sold at tool suppliers and possibly hardware outlets and it helps reduce friction. It seems to be an oily substance but I am not sure exactly what it is. One that I have used is called "Cool Tool". A note re safety though, always remove the electric plug from the outlet before doing anything with the blade! After that, use a tissue or cloth to wipe the substance on each side of the blade. It is a good idea to wear a total face mask as well as the "sawdust" from plastic is hot. It won't hurt your hands or arms but you will feel it. I always use a full mask when I use a table saw as one can never be sure where the sawdust will fly. It is not worth it to get a piece of wood in one's eye. June Simpson |
Room box Ideas; Wine box , acrylic breadbox which opens from both sides, & couldn't find papier mache bookends, so went to dollar store & bought 2 tall children's book. Removed the pages and glued/taped them together. Taping books together for roombox Forgot to mention I set them into foamcore. I used the thicker foamcore so I could make the slot & fill it with glue to hold the books and covered the edging with scotch plastic wrapped around. then I covered the floor with contact paper that looked like wood. This allowed me to do 2 different rooms. AnaMae |
Paper mache: Bob gave a mashed paper recipe. I did the same thing - newspaper, water, but added wood glue e.g. Elmer's wood glue. This I used to make large architectural decorations on my Dutch house. VERY SUCCESSFUL. But boy does it dry hard, like diamonds. I know from this wood glue /paper mush you can make houses, draw design on paper for walls, lay flat, fill design with paper mush, when dry, voila, house wall. Good for making fairy houses and stuff. Helen |
Cross Stitch/Needlepoint: First, there is no law that you start in the middle. You may find the center of the design and fabric and use this as a reference point. Many stitchers start in the upper left and work down. Generally, it is easier to put the needle down into a stitch you have already made than to come up through one. For a neater back, have as few thread breaks as possible, BUT don't carry the thread on the back for more than about 5 stitches. I like to use a thread as far as it goes from top to bottom, then start another, either continuing the same color. or going back to the top and starting the next color. Most of the time, it varies with my mood! I'm sure you already know, just as in needlepoint, that knots are never used. Run the new/ending thread under several stitches. Also, stitches are done in a line. In other words, don't cross each individual stitch as you go along. Do the bottom half on a row, then come back from right to left for the top half. Some stitchers will separate the individual strands of thread then put them back together before threading the needle. They believe it gives better coverage. What gauge fabric are you stitching? Remember that different gauges call for different numbers of strands of floss. For 14 count, you can use 2 or 3 strands. I prefer 2; to me, the 3 looks chunky. For 18, 1 or 2 strands may be used. Depends on the look you want, again. 22 count almost always means 1 strand. And anything smaller than that demands 1 strand. There are many counts of fabrics out there. Be sure to wash your hands before beginning to work. And remove your hoop when you finish a stitching session, even if you are going back to it in an hour. Martha Simpson |
Needlepoint: I always start in the center of the design and will usually work a full thread of one color before switching to the next color. I find that if the tension of my stitches is even, the back of my work is actually neater than if I were to switch back and forth between colors and have to clip thread every few stitches. I also usually stitch the design first and then fill in the background color. Just to clarify an earlier point, starting your needlepoint in the center is not just for convenience. When I was a pre-teen and my mother was teaching me to needlepoint, this was the first rule that I broke as I liked to learn things the hard way-- still do :) The first time, I started with the border and when I got to the center the canvas was bunched too close together and I could no longer see the holes to make my stitches. The second time, (I told you I learn the hard way) I started at one side and left too much of the blank canvas at the left margin. When I got to the right side of the design, there was nothing to stitch on! All that work! This is especially important when you are working a kit as you do not know how much extra room the designer has provided on the canvas or silk in the kit. I try to give an extra 1" margin all around in my kits so there is enough working room. I also include full skeins of each color (sometimes two). In my opinion, there is not enough savings to justify my time separating and measuring strands of floss for my kits, so I just make sure there is more than enough. For anyone who needs help getting started in needlepoint, please check out my "Needlepoint Tutorial" page on my site http://sites.netscape.net/orientalsxpressd/. I have included lots of photographs to show a complete work from start to finish with detailed instructions. Michelle Fox |
Cross Stitch: One key that I found for neat stitches and a really professional look is to always remember to have your stitches going the same way ie. all the bottom stitches going \ \ \ \ \ \ and all the top stitches (to form the cross going / / / / / / / / / . Also I never make knots in the back when I finish a color - I run my thread through 4 or 5 stitches in the back and cut it off. I usually get on a roll with one color - but you have to be very careful to COUNT properly otherwise you're wasting your time (because you have to get scissors and cut out what you've done). You don't have to start in the center but I usually do. That way I never come too close to the edge of the cloth. Always, always wash your hands before and periodically take a break and wash your hands again. Your hands can get a little (or alot) sweaty and makes your work grimy. Washing your project afterwards doesn't always do the trick. Vi from Hamilton, Ontario, Canada |
Free Cross Stitch Designs: I have a good start on my free miniature Cross Stitch Designs http://homespunminiatures.homestead.com/home.html mostly tea pots right now, my favorite. The page is slow at loading because I wanted to use better files for better printing of the instructions, so please be patient. As I add more, I will be categorizing the different types, so that will make it easier. And remember that the pictures look much bigger than what they will actually turn out. If you stitch on 18 count aida, that's 18 squares per inch and so on! There is 22 count aida sold also, if your eyes can take it, LOL! I love the way the Santa turned out and would be so cute as a door stop. Laura Busch |
X-STITCH: Martha gave some VERY good instructions on stitching. Having been a judge for various organizations, I would change a few things and add some, so here goes: 1. The reason threads are separated at the beginning is to keep the strands from twisting while you stitch. Gives a much flatter appearance and doesn't cause the threads to tangle as much when stitching. 2. She was right about completing a row with //// stitches before you finish the reverse stitch. This does save time when you find a mistake. 3. If you do find a mistake and have finished the complete stitch, do not reuse the thread if at all possible. This thread has become frayed from all the picking out, has become weak, and will lose its sheen. 4. Starting in the center, upper left, or in rows are all appropriate, just stick to your original plan throughout. This keeps the fabric at an even tension and will cause less mis-shaping. 5. Make sure your rows of stitches are all going the same direction. When the stitches are haphazardly done, the light will reflect differently and appear as if you have used different colors where they should be the same. 6. I look very closely at work and when holding it up to the light, if you can see light through it, you are prob pulling your stitches too tight. (hint: never do needlework when you are mad at the DH or kids!). 7. If you are seeing too much Aida cloth when you have stitched an area, you prob aren't using enough strands. Below is a strand list I use as a guide so this won't happen, after all, the point is to cover up the cloth, not just sprinkle color onto it (unless you are making trees in the background, in that case you can use only 1/2 of the stitch like this,/////////////// ). STRANDS PER COUNT 10 COUNT= 4 STRANDS 14 COUNT= 3 STRANDS 18 COUNT= 2 22 AND UP IS 1 STRAND Lisa Lynn |
Tea Dyeing: I have used tea to dye antique lace, silk and contemporary cotton fabrics, wallpaper, paper doilies, artificial flowers and many other things. I make a pot of tea, as if I planned to drink it (in fact, I usually have a cup while I work). I always use purified water to eliminate chemicals that can change the color. Be sure to let your tea cool before placing your fabric in it. It is wise to test a small piece to get the color the way you want it before placing the entire item in the bath. If the fabric is white, I dilute the tea with water 50/50. I prefer a glass pan, simply because I can watch the color change as it takes place. Add the diluted, cold tea, open the fabric and lay it out across the liquid. Try not to allow wrinkles or folds. This changes the depth of color in the areas of the fold. The fabric will sink to the bottom of the pan as it absorbs the water. You may repeat this process as many times as you wish to reach the desired color. Rinse in cool water, pat out on a towel to dry. Iron as necessary. Becky |
Tea Dyeing: I use the tea dying technique a lot in my patchwork, it tones down some fabrics which are too stark, especially on white background, and have used them in my quilts (big quilts), and it does not wash out. What is a good way to do it, especially if you are dying a small amount of fabric, is to put the tea bags in a bowl, add the water, dunk the fabric and put into the microwave until it boils and bubbles, then remove, let it sit for a while, rinse and press with iron. Another thing you can do is put the tea dye in a spray bottle and you can age the rag dolls with it, or if you want to age some fabric around the edges, mask areas off with masking tape and spray the rest. Pauline (Downunder) |
| Previous 10 | Next 10 Page 590 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |