Needlework: Susan asked about tiny needlework with a mess of colors tangling on the back. Believe me, I had this problem with the third piece I did in *real* size! The secret seems to be to use several needles with a different color in each. Then start from the center with the a color. If there are just a few stitches, then more not too far away, carry the thread across the back - it will get covered later. If more of the same color is quite a way away, park the needle (stick it in the fabric where the thread will be out of the way) and work another color. When you get to a piece with the first color again, you can run it under some worked stitches to cover the mess. And so on. Kay in Ottawa |
Soluble fabric stabilizer: I have done a lot of sewing, and have used a product called Solvy. It comes in different types, thicknesses, etc. I get mine at Joann's fabrics, and I "think" there is an iron on type. (I could be wrong about that. LOL!) It stabilizes the fabric while you work on it, then disappears when you wet it. I also believe there is a heat sensitive type, that you iron, and it disappears. The main thing is, it holds the fabric stable while you work on it, and then you get rid of the bulk later. Cindy Cleary |
Kemper Tools: The address for whomever wanted the info: Kemper Tools Lexie Johnson |
Solvy/Lace: this is wonderful stuff and I've been buying it by the super economy roll for several years for my machine embroidery. Anyhow here is another use some of you may be interested in. You can make your own lace with it. First take one layer and lay it down on a table. Then take little bits of threads - I always save clips from my metallic embroidery for this - you can just pull off some pretty thread from the spool or use bits and pieces from sewing - whatever. Fill it up as much as you like for the look you want to achieve. Less threads for a very sheer look and more for a more dense lace. Then lay another piece of Solvy on top of this, making a sandwich and it helps to either put the whole thing in a hoop or else pin the edges. Then just take it to the sewing machine and randomly sew back and forth and all over the top - - this holds the threads together. When you are satisfied with the look, put the whole thing in a bowl of water and the Solvy melts leaving you with a piece of lace. This would also work for spider webs, cob webs or whatever. Ronni |
Soluble fabric: I know Joanne's has the soluble fabric. It is with the interfacing. They suggested using it when putting button holes in sheer fabric, but it would certainly work for embroidery. They also have what they call "tear away" fabric, which is zillions of tiny holes (it's more like paper to me, but the lady called it fabric, so who am I to argue?) and can be removed easily from seams, but I don't think it would be as good for embroidery. Dani Rice |
Waste canvas for embroidery and cross stitch: I think the product you want is called waste canvas. It looks somewhat like aida cloth except that their is a blue grid printed on the fabric and it is more loosely woven than aida cloth. It is used for embroidery and cross stitch on ordinary fabric. You can either stitch it on with a few catch stitches or "baste" it on with the washable basting glue that comes out in water. Either way works, depending on whether your item is washable. When you are finished with your work, you wet the waste canvas and the glue holding the threads lets go. Then you pull out each thread of the waste canvas and throw away. Roy and Marcie Van Deren |
Cross-stitch Rugs: I don't consider myself an expert and I have only made 7-8 rugs so far, and manage to break ALL "the rules." Yes, I do start in the center (usually) but I make each x as a complete cross-stitch, then make the next x. I don't use a frame at all as I find it's not really needed for cross-stitch. I'm left handed, but the top stitch of each x is always "/". I work a small area in one color at a time, keep threaded needles of each color I plan to use in my pattern. I use 3 strands of DMC. I don't skip over more than 5 stitches, use 18 ct Aida cloth and, when it's finished, wash with soap water, roll in a towel and hand stretch on another folded towel. I'm left handed, but the top stitch of each x is always "/". I glue the two length edges to the back, fringe out the other two, then cover the back with iron-on bonding. This works for me. Jump in and you'll find out what works for you. Sharon in Watsonville |
Also at Joanne's. It's a double faced sticky tape iron on. It's great for zippers; just lay the tape on the zipper and smooth it with your fingers, then pull off the backing and place the zipper on the fabric, adjust it as necessary, and then iron it in place. It still has to be sewn, but you don't have all those pin marks and slippage. I would think it would be just wonderful for applying trim to mini doll dresses and curtains. Once it's ironed in place, you wouldn't need to sew it because there's no strain on dh clothing. It's about $4 for 40 yards of the quarter inch tape. It comes in two twenty foot rolls, but it's enough to keep and entire mini club in operation until the Second Coming. Dani Rice |
Blue and white plates and platters: I represent Avon Porcelain of the UK and have some of their Blue Willow pieces on my website at: http://www.spminiatures.com/avon.htm as well as the Stokesay Ware blue and white collection at: http://www.spminiatures.com/stokescant.htm Carol, S P Miniatures |
Carpets: Something that works very well, especially for bathroom carpets and cut rugs, as it doesn't unravel, is a Velux blanket. You can take an old one, or get it from Goodwill or such. They are too thick as is, but there is a mesh core inside them and once you work at the corner a bit, you can separate it into two sheets. Our Daughter's cats love to sleep on Velux, and it also makes a nice car blanket, light and cozy. MAP in Puyallup |
| Previous 10 | Next 10 Page 591 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |