Cross Stitch: I've been doing cross-stitch for donkeys years. I found that what is comfy for me works best for me, and it should be the same for everyone. Every book and chart (British, American and the odd Australian I've managed to get my hands on) shows you how to do cross stitch. It should be in rows with the first stitch going / that a way, and coming back going \ that away. There is no really fast rule to this, so long as you do every stitch with the bottom and top stitch of every cross the same. But, as most people do stitch / that way first and \ that way coming back, if your working on a piece that someone else is likely to stitch on, then make sure you do it the Universal way. If there's only yourself stitching on it, so long as every cross is uniform, do what ever. I've taken part in many, many cross-stitch round robins with people all over the world taking part, I know how heart breaking it is when just one person stitches the opposite way to everyone else. As for tidiness, so long as there is nothing to make the finished work look lumpy i.e. knots, and you're enjoying the stitching, just do your own thing. I've often bought something for this grown up house I live in that's not been cheap and isn't perfect! In Turkey, when they're making rugs, they purposely make a mistake. That's to stop the rug looking perfect. Perfectionists do not exist, only in their minds. Perfection is an impossible state. Enjoy your stitching, get pleasure from it, just make sure you don't strain your eyes doing it!

Hazel in frosty Aberdeenshire, UK


How to Make Silk Ribbon Roses

http://www.csolve.net/~minidoll/silkrose.htm

Marlene Chapman (Ontario)


Baseboards and moldings: Unique Miniatures of Isanti, MN(16 W. Main St,612-444-5522) has great moldings and trims. Saw their line at Mpls show and they also have door frames, columns etc.

MK in Iowa


Fringe: easiest fringe is woven (not plastic) grosgrain ribbon. Recommend buying it twice the width you want (i.e., 1" if you want 1/2" fringe). Mark and cut a straight line down the middle, then use a pin to start raveling one edge. Stop raveling when the fringe is the length you want. The finished edge looks like the looped top on "real" fringe. Use a thin line of tacky or fabric glue to attach to the rug edges.

Loretta.Sniarowski


Glue/flocking: When I am making a costume for a miniature doll I glue all the costumes using very fine beads of glue. Some fabrics just soak up the glue and never want to stick together. So I put a bead of glue on the both pieces of fabric I want to glue together but I just let the glue dry without sticking them together. When this is completely dry I put another bead of glue on top of the dried glue and stick the 2 fabrics together. This seems to work because I am gluing glue together rather than fabric. So perhaps if you put the glue on the flocking and let it dry thoroughly then paint. On flocking you might need several coats. It might work.

Jan in Canada


Perfect Cross Stitch: A few years ago I went to Colonial Williamsburg in Virginia (US). In one of the homes we toured there was a lady in period costume cross stitching. It was perfect on the front as well as the back. When I asked how it was done, this is what she explained.

1 3 6

2 5

8

7 4

Up at 1, down at 2, up at 3, down at 4, up at 5, down at 6, up at 7 and down at 8. Hope this comes through cyber space the way I drew it. Quite a challenge, try it!

Ruth, Grass Valley, CA


Cross Stitch: When I cross stitched in "life size" I religiously started in the center like I was told because when you're stitching an 8 x 10" picture or whatever, it's quite difficult to figure out anyplace else to start and not run the risk of running out of fabric when you get to the other side or the bottom or whatever. But....in miniature cross stitch, I almost always start in the upper left-hand corner. For one thing, so much of what we do in miniature is either rugs or samplers and they always have borders, so you basically know where all the sides, top and bottom come to.

As long as your piece of fabric is big enough (say around two inches bigger than the design all the way around), then you can start your border an inch or so from the top and an inch or so from the left side and you know you'll come out all right. Even if you're stitching something that doesn't have borders, the pattern is usually small enough that you can count across the fabric the number of stitches in the widest part of the design and figure out how far in and down to come from that (at which point I'm probably beginning to not make myself clear!) The main reason I'm so in favor of starting at the top and working down is because then *most* of the time you are bringing your needle up in an empty hole and that becomes fairly important in miniature needlework. When you start in the center, you'll be working down from the center to finish the bottom, but you'll be working up from the center to finish the top and that is a royal pain!

So that came out to more than 2 cents - probably more like a nickel's worth. Sorry, but I kind of wanted to stress that it's not a cardinal rule to start in the center :)And I'm also sorry, but I'm very much in favor of keeping the back of the work as neat as possible :)

Mary Lynne in Huntington, WV


Finishing Cross Stitch: next time you do a cross stitch carpet (one is never enough!) when you are nearing the edge fold under the edge where the carpet would finish, trim to 2/3 rows from there and then bind. I also mitre my corners. The best cotton for fringing is No. 8 pearl cotton.

Raeleyne Rogers NZ


Finishing Cross Stitch: Before you take it out of your hoop do backstitching around edge of design as you do for outlining. You can then cut away extra fabric. I cut within one square of finished design. Have seen other stitchers who cut further away and then use excess to do their fringe. The backstitching will keep it from fraying.

Phyllis, Coast of Maine


Finishing Cross Stitch: I have found that my favorite way to finish cross stitch rugs is to use iron-on interfacing from the fabric store on the back. Cut the interfacing to size (be sure it covers all of your stitching!), iron it on before trimming your rug, and then trim at the edge of your stitching. The interfacing will keep everything from fraying. Just be sure it is completely bonded to the rug. There was much discussion on the Digest recently about creating fringe from grosgrain ribbon, etc. I haven't tried any of the ways that were mentioned. As for washing, if you used DMC or one of the other national brands of thread, it should not fade or run. Personally, I wouldn't wash unless the rug looks like it needs it.

Doris Alderman


Previous 10 | Next 10


Page 592 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)