Copyright: You're permitted to use any ideas, cut-outs, etc. from miniature magazines as long as they're for your use only and are not to be sold for profit nor taught as a class for a fee. I've been doing minis professionally for about 12 years so I'm very careful about this. There was quite a ruckus in DHM a few years ago when someone published a DIY article that someone else claimed the writer had learned in a workshop taught by the second party (I sure hope y'all can follow this!). Copyrights do expire, as long as they're not renewed by the original owner or the owner's estate, but this takes quite a long time. (I'd be very curious to know what Disney has paid the Winnie the Pooh and Peter Pan estates for use of the characters. All profits from the Peter Pan estate, BTW, goes for eternity to a children's hospital, I think inLondon). Unfortunately, you can't copyright "ideas," so I've seen my things (Fox Hollow Miniatures) replicated, often without the slightest change. A lot of my professional mini friends deal with this, and our consensus is that we just have to keep on inventing new things to stay ahead of the copycats. Kate |
Creative Crafts & Miniatures: In response to your inquiry about the authors and projects in Creative Crafts & Miniatures, the only one I know about is Ruth Armstrong. You would need her permission to do anything about sharing her projects. I don't believe she has an e-mail address but her snail mail address is: Ruth Armstrong, 302 South St., Jonesville, MI 49250. Marlene |
Copyright: Since there have been so many discussions on this topic lately, I've posted an article on copyright. Are you breaking the law when you print graphics for your dollhouse? Find out---the answer may surprise you: http://miniatures.about.com/library/weekly/aa110500a.htm Lisa Vollrath |
Paper Clay: I've been making paper clay bricks and stonework from an article by Ric Pierce in the May, 2000 Miniature Collector. I have not been applying the paper clay directly onto the wood for a fireplace or house, as his directions say to do...I have been making small squares of flat paper clay to start with. And, have come up with a tip for working with paper clay in this way...since you have to score the front for bricks, stone, etc...score the back too. Otherwise the paper clay will warp when drying. His instructions are clear, and this has been a fun project...not to mention a extremely useful way to make lightweight brick and stone. Kaye in L.A. |
Inexpensive ways to do things. Dollhouses on a shoestring: http://member.aol.com/Kapricrn Trash to treasures tips:http://homestead.com/miniscale_homes/miniscale_homes_tips.html Maureen in St. Albert AB CDA |
Gold Leafing: You can buy gold leafing adhesive sizing at most arts and craft stores. It comes in a small bottle and will be enough to last you almost forever. If you have genuine old gold leaf, you have quite a find. The stuff they sell today is "genuine imitation" gold leaf. You can also buy sheets of silver, copper and brass colored leaf. When you apply your adhesive size, rub some liquid soap into the bristles of your brush first. This will make it easier to wash off the sizing when you are finished with the brush. The leaf goes on after the glue is dry and no longer milky looking- may take up to an hour. Lay the leaf over the area and lightly apply. Use a clean brush to work it down onto the surface you are covering. When you are finished, you can use the brush to clean the leaf from areas where there is no sizing. Save your scraps to use to cover areas where you have rips in your leaf and you need more coverage. Make sure you don't have a fan going when you try this, the leafing will go everywhere! I use gold leafing on my gourd art. Bonnie Gibson, Tucson, Arizona |
Easy Gold Leafing with Imitation Leaf: Gold Leafing is fun and particularly effective in miniature - you get a lustre that you just don't get with gold paint. You can use the real stuff but it is expensive and difficult to work with - 24K leaf is so thin you can see through it! If you want to experiment, get hold of some imitation gold leaf - or Dutch Metal/Schlag (sp?) and some ordinary white PVA glue. A mini wooden picture frame is a good project to start with. First paint it with gesso to make it nice and smooth. Then paint with coloured acrylic -traditionally a deep rich red is used - the colour shows through the gold leaf and gives a rich effect - this is called the carnation layer. Use scissors to cut the gold leaf into squares about 1" square . When the paint is dry, brush on a thin layer of white glue and let it dry for a few minutes. Then lay the gold leaf onto the frame piece by piece - each piece slightly overlapping the next. Use a large soft brush and gently stroke the gold leaf onto the frame. Now take a dose of patience and let the whole thing dry for an hour or so. Next use your soft brush to brush away the excess leaf. You will probably find that the leaf has cracked here and there exposing the red paint - this makes for a very authentic finish. Finally, tone down the brightness of the gold by rubbing a little burnt umber onto the frame and then wiping it off. Lesley, Johannesburg, South Africa |
Gold Sizing: I use Rolco gold size varnish. Is is a quick setting varnish. I get mine at an art store. Remember to wait for it to "set-up" and the longer you can wait before it loses tack, the better your leaf will look. Also, it would be interesting to find out if the book of gold leaf sheets is set apart from each other with rouge paper. If you want to email me privately I can tell you about mounting the gold leaf on wax paper to make it easier to apply. Gary in NH |
People responded to the original posting and I think most, if not all, told about a water-based gold size for composition leaf. I use this product and like it and yes, it has its uses. I also use gold leaf that is real hammered out (pressed) gold. It requires a varnish based sizing which I told about on digest. To repeat I use Rolco which is a quick drying synthetic varnish. I buy a small can because if it gets gunky I can toss it and buy another. You don't want to cut corners with gold leaf. As for the wax paper, I use the wax paper from sandwich bags. Yes you can still find them in most groceries. They are better because they are thinner and have less wax. This can be good if you want the gold to stay better where you want it. Here is how to transfer the wax paper onto the gold leaf: 1. Cut the wax paper to fit the outside cover of the gold leaf book or, you could make it a little larger. This way the oil from the fingers will not get onto the gold. 2. Take the book of gold leaf. Open it from the front--the part with all of the writing. Go past the section of rouge paper and you are going to work with the gold leaf facing you. Place the square of wax paper and gently place it over the gold leaf, lining it up properly. Gently rub it with a finger and the heat from it will cause the wax paper to stick temporarily onto the gold leaf. 3. I failed to tell you that you should only prepare the number of gold leaf pieces that you will need. If you prepare too many onto the wax paper, the gold may stick permanently. 4. Now you can take out a piece of wax paper with gold leaf adhered temporarily. You can also cut it to size but each time you gently cut it with sharp scissors you MUST rub the blades with a piece of rouge paper so don't throw the rouge paper away. 5. Place the wax paper with gold leaf where you have prepared the size, place down gently and rub gently with the fingers. The warmth of the fingers will cause the gold leaf to adhere to the sized area. BTW, if you are lifting up the wax paper when you are done and notice some areas that did not take (these are called skips or holidays.)You can put the wax paper in place and rub gently in those areas. 6. Throw the wax paper away and breathe again. This is much less nerve wracking than the leaf in the wind technique where you take the gold leaf up after placing the brush in the hair for static electricity. Also it helps to use the wax paper if you don't have any hair! 7. Now you can take a cotton ball and gently rub over the gold leafed area and use a large soft brush. I use a large oval mop (very soft) and brush gently. 8. Being a New Englander (nasty cheap,) I save the gold leaf pieces remaining on the table in a glass jar with a screw lid and use it on projects that don't require such exacting work. I also suggest if you are interested in learning further that the craft farm in Vermont (The Fletcher Craft Farm) is great. They have a nifty free catalogue and you would not believe the cost (I did say I was thrifty and a New Englander) or the variety of crafts. I have taken courses in EAD (Early American Decoration) using bronzing powders and gold leaf. The instructors are the best. BTW -the guild is called the Historical Society for Early American Decoration (HSEAD). They are online and have a wonderful magazine article which illustrates many techniques including gold leaf. It may be a starting place for ideas and pictures. The guild is juried for admissions based upon stringent standards and techniques that are hundreds of years old. EAD is the one branch which shares some techniques with tole but is not tole. The address for a catalogue is Fletcher Farm, 611 Route 103 South; Ludlow, VT 05149. They celebrated their 50th birthday 2 years ago I believe. Gary in NH |
When to wallpaper: By all means, do your wallpapering before you install the stairs, fireplaces, moldings or any other structure. It would be very difficult to paper around those structures. Whether or not to install fireplaces as you finish a room or wait and do them all at once depends on if you like to see the results of your labors as you go along. Take care to measure where you plan to install the fireplace and leave an opening in your baseboards, so the fireplace can fit into the opening thus allowing the fireplace to be flush to the wall, rather than having an air space behind it because of the baseboard. I forgot one important thing which you may not know about since you are a "newbie." Never apply wallpaper to an untreated, raw wood surface or your paper will buckle. You can paint the walls with white flat latex paint or use sizing that is used in "real" life which is less expensive. Trust me, I found out the hard way and had to remove two floors of hallway mini paper - not a fun job and worse yet, I knew better than to do that. Jeanette in Wauwatosa, WI |
| Previous 10 | Next 10 Page 603 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |