Depth: Wonder how many of you are like me and like a 3 dimensional effect with the pictures they use in their minis for looking outdoors through windows or doors? I knew when I started doing this that it would add hours to a project but still decided I had to do it. The effect is fantastic but not for the faint of heart who want something done right away. It's extremely time consuming but well worth the effort.

If you looked out the window, you saw mountains. I didn't want just a picture of mountains, there wasn't enough room for actually making any, it was only a space about 1 1/2" deep and lot's of stuff had to go in that space. So I proceeded to make several copies of a mountain with sunset scene, and cut out the mountains and glued them atop each other until it had the effect I wanted, then bent the bottom of the picture forward so that it sloped in the right way. The effect was amazing.

Then I actually drew birds flying overhead, some tiny ones sitting in the snow up closer to the picture window and on top of the bike seat, that was just outside the window. Even had a "Don't cut the grass" sign just sticking up out of the snow. Had a birdfeeder out there too

That left a space to the right of that window that was the same depth that I couldn't figure out what to do with. Didn't want to waste it, so I put in a wide door opening and behind it I found a picture looking off into other rooms with a curving staircase in front and to the left. Again I proceeded to print several copies of the picture, cut out the steps, and then the railings and glued them on top of each other until they were 3 dimensional. I slightly curved the bottom of the picture out so it looked like the floor that was in the roombox blended right into the other room. Made the room look much huger than what it was. There was a large plant to the left of the staircase and I also cut out tons of little leaves and glued them around the picture so it looked like there really was a plant there, bent this way and that so that the leaves looked realistic.

Kathy in E. TN


I already have an idea for a project. Picture a woman sitting at a computer, engrossed in what she is reading on the screen. (If you look really close, you will see it is SSD.) Behind her is a washing machine with a pile of dirty clothes, then an ironing basket with a stack of ironing,waiting to be done. There is also a dishwasher open to show clean dishes waiting to be unloaded, and in the sink dirty dishes waiting to be loaded. Perhaps through an open door a glimpse of breakfast dishes still on the table. Through the kitchen window some washing is on the hoist and the pot plants wilting in the hot Australian sun, dying for a drink. That is a picture of me over the last week, reading and absorbing all the mail you sent, and if I ever do get around to doing that scene, l shall call it: I WOULD IF I COULD.

Joyce J. from Downunder


Wire Mesh: The aisle with the Wire Mesh was the one with the gold leaf, and I believe FIMO, etc. The wire mesh was available in different screen sizes - mine was 80 mesh. The other sizes would be great for frames for lamps. If you cut it into strips, you could weave it and it would hold its shape while you weave for a great woven basket. You could shape it into a modern chair, covered with foam and fabric or leather only. There's no end to the wonderful lamp shades it would make. Single strands would be good on a 1/144" Christmas tree.

Jean Day


Polishing with "rouge": A handy rouge to polish with if you are doing it by hand or by machine (Dremel) is to use plain old tooth paste. After all, it is a very mild abrasive (rouge).

Dr. Bob


Polish: If I want a really good mirror polish on jewelry or a mini, I use Mother's Mag Wheel Polish designed for chrome or aluminum. My DD needed a mirror that was a cylinder for a project and I made one out of stainless steel, hand polishing with that stuff. It worked very well. The grit is finer than jewelry polish, and it is suspended in a white grease that can be washed off afterward. Buy it in a hardware or automotive shop. I use a lot of it, but it comes in a small jar too, which would be a lifetime supply for a miniac, at quite reasonable prices.

Rroweblue


Polishing Compounds: When I mentioned polishing wheels for the Dremel, I used rouge as an example because often accessory kits come with a small container of this polish and often people don't know what it is used for. I actually prefer other compounds - I do a lot of jewelry work and use Tripoli, Zam and other compounds. "DrBob" is correct that toothpaste makes a handy and cheap polish. I have used that to polish the edge of Plexiglass and other things with much success. Someone also wrote about the mag wheel polish which is also great stuff. My favorite for hand polishing of metal is "Wenol" that comes in a large orangey colored can or in a tube. That and a bit of elbow grease really gives things a mirror shine.

Bonnie Gibson


3-d Effect: The 3-D effect is actually Paper Tole - quite popular in full size and I have done about 30 of these over the past few years. They certainly add another dimension in the background of a scene - especially when used for a scene out through a window, or from a balcony.

Jan in sunny Melbourne, Australia


Matboard: Brooke Tucker always advises against using matboard because it is not meant to have paint, glue or anything like that on it and it can separate into layers. Illustration board (poster board) comes in single and in double thickness and is meant for these purposes.

June in London, Ontario, Canada


Mat board: Seal it first with shellac or don't use water based paints to avoid separating.

Tom Berkner


Hard Paint: I had some acrylic paints in screw top jars go hard too. I put the rest in squeeze bottles and they lasted much longer. Acrylic paint is plastic so once hard there is not much you can do to salvage it as paint. However.. being a miniaturist you might try shredding the hard paint with a knife to use as foliage, slicing it into shapes as you would cooked FIMO. It makes interesting grass for small scenes. I sometimes dry a thin layer of acrylic paint on glass and scrape it off with a knife for paper thin leaves for plants, it's very flexible.

Jean Day


Previous 10 | Next 10


Page 604 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)