Clear nail polish: I have been using nail polish for a while now and agree that it is so much better than fray check in many ways. Not only do I use the clear polish to stop fraying on fabric but I also use it to give just the right shine to porcelain pieces that I have painted with acrylic paints and then sealed with the polish.

Marilyn


Making fabric roses: I have not used the commercial fray-stop products for a number of years. They always seemed to bleed and discolor and generally make me stop working for a while because I was discouraged with the results.

And then I discovered that I could use clear nail polish instead. In fact, clear nail hardener works even better than nail polish. And it is so easy to apply. I dip the brush into the hardener and then hold it at a 90-degree angle to the fabric edge. I gently tap all along the fabric, refilling the brush if necessary (but not too full).

This gives a very fine line, which is almost invisible, and it is also flexible. It would probably work for your fabric roses. What it does for me is let me sew the seam without having to fight to get the needle through the fabric! Believe me, that is a great bonus.

Joy Parker


When I am out of fray check, I use a tiny amount of glue on my finger and rub into the edge of the fabric. It keeps it from fraying. I can not use finger nail polish because of allergies. This might help those who can not use finger nail polish.

Mary


Printing on Fabric: Be sure to have a good image to begin with. Save it as a tif file for printed output not a jpg or gif. Because jpg format compresses as it saves, the image will lose quality each time they're resaved. gif only supports 256 colors. If you're scanning an image use at least 150 dpi for printed output. The 75 dpi is fine for scanning images to use on homepages, but your printer will support greater dpi output. Also be sure to check your printer options and settings to get the best output.

Use whatever fabric you like, (natural fiber is recommended). I usually take sizing out of fabric first and press it very smooth before printing on it. If you don't take the sizing out, the ink sits on top too much, rather than bonding with the fibers.Cut it to 8 1/2 x 11 inches and affix it to full-page Avery Labels. Rip off the paper backing, as you would with any stick on label, then affix the fabric to the sticky side, once again making sure it covers the leading edge in particular completely (no sticky label extending beyond the fabric so the label won't stick to your printer rollers).

Load it in your printer (making sure which side should be up), and print! Depending on the fabric, you may want to seal the edges from unraveling with a thin bead of glue. After printing, let it dry and cure for several hours and then iron with dry iron as hot as your fabric will take, then spray with two coats of fixative, drying and pressing in-between. Don't remove label until all the pressing and spraying is complete. Much easier to handle and keep square.

You can use the Avery labels over and over again, until the stick-um doesn't grip well at the edges any longer.

Anne Gerdes


Printing your own fabric: Just read Anne's hint about printing on fabric. I have not tried exactly what Anne suggested, but have printed on fabric for quite a while and have a few comments. Judee' Williamson (my biz partner and fabric maven) ALWAYS pulls threads on the fabric first so that the fabric itself is square, and then cuts the fabric along the pull lines. She considers it a vital point! Then she irons the fabric to a piece of freezer paper. The freezer paper can be used over and over. It holds the fabric gently. The fabric can easily be removed from freezer paper. And the paper is cut to the correct size - usually 8 1/2" x 11" - and fed into the printer just as Anne described.

Nicole Walton Marble


To print on fabric I use my ordinary bubblejet printer. Take a piece of thin cotton lawn (for some reason off white gives the best results) glue it on a piece of regular paper, only the bottom and the sides with a glue stick (or iron it on freezing paper for you Americans, we don't have that here) Make sure that the bottom of the paper and the fabric are cut in one line, and feed this through your printer. On some printers' setup you can click on "fabric sheet" but I use the normal setting. When printed, peel the fabric off the sheet and iron (without steam) to set the colors.

You can make all sorts of things like that: tablecloths, carpets, curtains (matching the wallpaper) etc. I copied some material on my scanner and reduced it to scale, then printed it on fabric.

I heard that in America you can buy something like bubblejet set, but as we cannot buy that here in New Zealand I have no experience with it.

Dorothee


Flocked Wallpaper: If you want impressed designs, lay 'velvet' paper on top of a doily or something else with a raised design, spray with fabric starch and iron heavily. The nap will stay raised where there is no design and flatten where there is a design.

You can also do this on velvet or that upholstery fabric that has a nap.

Anne Gerdes


Fabric Printing: After the size has been washed out, no fabric softener in rinse water..Poly/cotton works best, iron to shiny side of white freezer paper, rule cut line with sheet of paper and cut inside of line to have 8-1/2 x 11 regular size paper. Print like special paper option on inkjet printer and let dry, cover with press cloth an design is permanent. In regular size they can be washed.

Lenora


Printing on Fabric:  I've got directions for one way to print on fabric at http://wingsnthings.tripod.com/spring.htm   It uses a regular printer and fabric ironed onto freezer paper.

Lee Menconi


Printing Fabric: I like to buy the packages of June Tailor Printer Fabric. Wal-Mart in the quilting dept, 4.00. And I have also bought it at Hobby Lobby for 5.29, and seen it at JoAnn's. There are 4 sheets to the package and it comes in bleached or unbleached muslin. It's fabric on sticky paper (like the labels) For rugs, I leave the backing on to stabilize. Then I add fringe if I want to. For quilts, upholstery, clothing, curtains and pillows and such, I peel the backing off. I have had really good experiences using this. I do have the capacity to print and iron on like transfers, but haven't found this necessary. I have had no problems with the fabric through the printer. I do make sure there are no loose threads on the sheet before I put it through.

Fannye


Previous 10 | Next 10


Page 606 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)