Crown Molding: The best way to fit the molding is to use a mini miter box and saw. Miter the molding ceiling side down. What this means is to turn the molding upside down when you miter it. I suggest that you practice on some scrap wood first.

Carol


Crown Molding: I asked my husband who is a carpenter. He says it helps to be dyslexic. Baring that, here's how he explained it to me. It works if you label your miter box. The bottom of the miter box becomes the ceiling of the dh because you have to turn the molding over when you go to cut it. The back of the miter box becomes the wall of the dh. When you cut the molding, the right-hand corner of the miter box, becomes the left-hand corner on the dh ceiling and the left-hand corner of the miter box becomes the right-hand corner on the dh ceiling. I won't tell you how many pieces of wood I wasted before I asked for help! A trick I use sometimes, is after you label your miter box, draw it on a piece of paper and keep it where you can see it.

Grace Shaw


Crown Molding:

1. Cut your molding as it stands upright, just the way it will fit against the ceiling. Don't lay it flat. (I believe you are supposed to turn it upside down, too. Try some practice cuts with some small pieces of your molding.)

2. Cut from front (the side with the design on it) to back. That means the side with the design on it will be facing you. If you cut from back to front, the fit is not as good.

3. Cut your pieces too long and then nibble away until you get a perfect fit.

Barbara


Wallpapering: If you are like me and find you want to change the decor in your house or roombox later, paint you walls with semi-gloss paint before wallpapering. The paper will stick, no problem, but will be easier to remove later than just primer or a flat paint.

Pat M.


Painting metal: A lot depends on how detailed the items are that you are painting. I sell a lot of metal miniatures that have a lot of detail and I use Floquil paints. They can be bought at most railroad hobby stores. They are a fine pigment petroleum distillate based paint meant for tiny metal items. Yes, you should use a primer underneath them. You should also be sure to wash them with warm soapy water and allow them to thoroughly dry before painting.

For something larger, you can use a paint that is thicker. In fact, I wouldn't recommend Floquil on a larger flat surface as the paint dries to the touch very quickly. It is best to wait 24 hours between coats though. And use in a well ventilated area. Any paint that says it can be used on metal will probably work. Just follow the directions. There are some acrylic based paints meant for small miniatures as well. I haven't tried them. Floquil is quite durable. Hope this helps.

Debbie Olsen


Painting on plastic: I've been painting mini plastic slippers and found that a coat or two of water based Kilz creates a wonderful base for acrylic paints. Getting the Kilz on takes a little patience but it works.

W. Marie in Edmonds, WA


Painting on plastic: Tamiya Brand paints are made for painting plastics. They are waterbased, come in small jars, and are sold at most model (train) stores. They have a bit of a bad aroma, but the results are worth it.

Roz Weitzman in Toronto, Canada


Fixative and/or Primer: I keep a small non-aerosol bottle of hairspray (lacquer base) on my work table. I've used this for years to set chalk drawings and other works from my art students. I love it for a quick lacquer finish to a small piece of wood or a fast primer.

Becky


Gold finish for chandelier: Have a look at this internet site:

www.baremetal.com

They sell sheets of gold (others too, like chrome and black chrome) for use on model cars, airplanes etc. I am sure this would give you that lovely smooth gold finish you want on your chandelier. The sheets cost $5 each but you'd only need one. I am sure they would provide instructions as well. I have been thinking of getting some just to have on hand in case a need arises. Does anyone have any first hand experience with this product?

Penny Johnson


Flagstone Flooring: Joanne Swanson had an article in Dollhouse Miniatures, October 2000, for a Wizard's Room box and she gave instructions on doing a flagstone floor. You can get back copies by going to the Dollhouse Miniatures web site.

I did the floor, haven't painted it yet, but so far it looks good. At first I wasn't happy with it but after a few tries got the hang of drawing the stones. Best to practice on paper until you figure out how to outline the stones.

Elizabeth


Previous 10 | Next 10


Page 611 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)