Shopping Guide: Have been noticing all the questions about stores in different locations and have a suggestion: take a look at the CIMTA site, http://www.cimta.org and click on the Shopping Guide. You will find all the member stores and it is a great way to check on who is where. The listings are by state.

Ann Hendricks


Las Vegas Store: There's a miniature store out by the Liberace museum. It's several blocks off the strip but if you're young and healthy, you could walk it. I took the bus, the last time I was there because we were staying downtown. The name of the shop is Kimberly House and it's at 1775 E. Tropicana #10. Phone 702-795-2276. You might want to call before going all the way out there. It's a pretty nice shop and the home of the publication, Kimberly Corner.

Gail Dillard in Lompoc


San Francisco Stores: I got a terrific list of stores in San Francisco from my dear, dear Grace Shaw, of http://www.virtualdollhouse.net, here it is:

Olde Victorian Miniatures
724 main Street
Half Moon Bay, CA
Phone: 650.726.6915

Elizabeth Baxter, Ann Arbor


I have made "beautiful" hardwood floors with wood purchased with the grooves already imprinted. I just stained, polyurethaned and installed. Cheap and easy.

But the reason I'm posting to the list is because I decided that I would try some printable flooring. I never wanted to before because it just looked so....so... I don't know...unreal? Well, anyway, I went to Eileen's and chose hardwood flooring. She had a nice pattern for parquet(?) flooring. I printed it, used a glue stick and glued it to some thin cardboard (file folder), I then put on three coats of the polyurethane. BEAUTIFUL!!! I mean absolutely beautiful. I think I like it better than the actual hardwood floors. If you haven't tried it, give it a try. I think you'll be pleased. I'm going to try some of the other tile on her site. If you'd like I'll let you know how it goes. I'm sorry I don't have pictures yet, but I will. Just trying to fix up my Beacon Hill after seeing Kathy's (it will never compare.) And thanks so much Eileen. Also, Hope of Hope's printables. I just put some of your wall paper up today. Beautiful

Tonya in Brooklyn


Mitering; If you have to go beyond a butt joint and have to measure mini angles (corners in a room or door and window openings,) a few things came to mind. Take a small pinch of kiddy clay and press it into the corner to be filled and you now have the angle of the corner. Take it from there. Or, yhis may be difficult to explain (describe)but..... think of the letter "H". Use pointed flat or square toothpicks for this. For the 2 vertical parts of the "H", leave the points on. For the cross piece of the "H", cut off the points. Make an "H" using the three pieces of tooth picks and attach the cross piece to the vertical pieces with a small straight pin. This permits the vertical elements to move (rotate around the ends of the cross piece. In this way you can place your device into the corner to be measured and adjust the vertical elements to measure the corner. Of course the limit to this device is an angle no bigger than 90 degrees.

Dr. Bob, Delray Beach, FL


Removing Adhesives: Here for once us kiwis have a product that you overseas folk won't have! A door-to-door salesman comes around our homes (yes, even today in the year 2000!) and sells medicines and creams, essences, and all sorts of wonderful products. He is called a Rawleighs man. They sell a product called 'Ready Relief'. You put RR on your pillow or your hanky when you have a cold or you put it in hot water and inhale it to clear your nasal passages. It is fantastic for removing sticky labels (or the remains of) from jars and bottles etc.

Now you are probably saying what is the point of telling me that when I can't get it here? The basis of this product, is Eucalyptus oil so, try get some Eucalyptus oil and get the stuff off with that. I would test it on a similar jar first just to be sure it doesn't cloud the plastic - the oil being stronger than the Ready Relief. I actually wrote the rest of the details for the benefit of SS Kiwis who can buy this product!

Diana in New Zealand


Removing Adhesives: The best thing to use to remove labels is De-Solv-it. I purchased mine at the local Wal-mart. It will take off labels and just about any kind of sticky residue. I've used it on glass, wood plastic, etc. I even used on an old kids desk where the labels had been on there for many years and they all came off easily with now scratching of the wood. If you can't find it in your area it is made by orange-sol household products. Their web address is http://www.orange-sol.com phone number 800-877-7771.

Terry


Removing Adhesives: Avon Skin-so-soft works well, and doesn't dull plastic.

Kay Gale


Removing Adhesives: For label stickiness I try Mineral Spirits first. I used to use furniture polish (I think Heloise recommended it) but then you have to wash THAT off too. My resident Chemical Engineer says to use Mineral OIL. His company sells flooring adhesives and he says the installers use only Mineral Oil to clean off the glue.

Jhliddington


Removing Adhesives: about getting glue off a plastic bottle: Use Orange Oil. It won't cloud the plastic. You can get it in the grocery store or home store- it's also great for getting pine sap from the Christmas tree off your hands and dissolving most kinds of sticky, gunky stuff, it won't harm your skin, AND it smells good!

Linda


Previous 10 | Next 10


Page 619 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)