Copper Bay Window Roofs: Years back, I made a Tudor Shoppe with a copper-topped bay window. We did make a paper pattern, glued the sheet of copper to cardstock with contact cement and then, cut out the pattern, bending as necessary to fit the roof area. We glued it to the Shoppe with hot glue and tacky. For aging, we used a commercial product called "Patina-It" which I found at a model train shop. There may be something available for aluminum also, for the person doing the trunk. (Sorry, can't remember your name.) Another aging product made by the same company as Patina-It is "Weather-It" for wood. Works great. I have no connection to this company, just like the products. When I first started making minis, everything had to be neat, clean and perfect. Then as the years passed, I discovered that for realism, perfect means more normal, aged, and lived-in. Isn't this hobby great ! Marjorie in CA |
Removing Adhesives: I've yet to read the easiest and cheapest way that I use (but may take a little more time)- pure dishwashing liquid soap (DAWN). After I soak off the label while the water is hot and soapy, I scratch off an abundance of the collected glue with my fingernail. It doesn't scratch the plastic since the glue is softened from the hot soapy water. Now pure dishwashing liquid soap (I use DAWN) is readily on hand and useable. After the bulk of the glue has been removed, I apply a coating of my undiluted Dawn dishwashing soap. I smear it around over the glue residue with the tips of my fingers and leave it soak a short while. I keep running my finger around over the sticky gooey area to keep the liquid soap ON THE SPOT that I want to clean. A light application of my fingernail over the glue area takes off more (almost all) of the glue. I usually take a paper towel and rub off as much of the glue that will come off after being further softened by the full strength dish soap right from the bottle. Usually there is just a little cloudy smearing of glue substance evident at this stage of the removing/cleaning process. "IF" it's important to have the container completely clear of glue (smears) at this stage of cleaning, I would use a little GOO GONE. Applying this moist Goo Gone to just a corner of the towel is enough to remove the smear of glue left on the container. A little washing with hot soapy suds and a clear rinse will leave the container (plastic or glass) sparkling clean with no residue left. It takes a little more time this way but much less of the expensive cleaner, Goo Gone. It does not evaporate in its tightly sealed container with its specially sealed top which has small hole that emits its liquid only when the bottle is squeezed. Barbara Smith |
Ageing and weathering [DUST & COBWEBS]: The bagless cyclonic vacuums are great for the carpets and floors in your "real" house. I would stop quite short of using the dust that's in the container after vacuuming though. Reason = think of all the molds, allergens, bacteria / viruses tracked into your house on the bottoms of shoes and that are "blown in" through windows on a daily basis. A more reasonable and cleaner method for "dust" in your doll house or room boxes is stucco powder. You may purchase this in the paint department of any hardware/home supply store. I've used a small container for about 10 years. To use, put a about a 1/2 to 1 teaspoon on either a piece of typing paper or the palm of your hand. GENTLY.......blow into the areas that are to appear "dusty". No need for any spray to hold it down......it will stay put. If you need cobwebs to go with the dust.......purchase a package of the white fluffy Halloween webbing at a party supply store [i.e., Party America]. Use a very small piece and pull out to a VERY THIN layer, then drape wherever you want the cobwebs. Much safer than turning "pet spiders" loose in the house. Patricia/Redwood City, CA |
Removing glue: DON'T use nail polish remover on plastic! It will permanently cloud it. I haven't tried the new remover without acetone on any though. Maybe it would work. I haven't had anything I wanted to risk trying it on. Debi in Quesnel |
Removing glue: They have been using straight acetone on plastic for years. I've worked in an optical lab since 1980 and that's the only thing we clean the plastic with. It depends on the grade of plastic you are trying to clean off. I've cleaned all my old medicine bottles off with it. No problems. (Lots of other stuff too) Just remember to use it sparingly. Donna |
Removing glue: I've had very good luck with rubbing alcohol. Be patient. Pour it and keep the area moist with it. It will take a while. It's also good for removing acrylic paint from windows too. Shannon Moore |
Sealing plywood: I always use White Shellac. Regular shellac works too but lets the color of the wood show through. I like to thin it out a little to make it flow better but leaves you with a nice sealed wood to prime (if you are going to use paint) or wallpaper. By the way, shellac is the best sealer of all time in my opinion. I had a piano I was rebuilding that had mice living under the keyboard, of course leaving little reminders of their existence. I washed it, disinfected it, did everything I knew to get rid of the smell but to no avail. I thought I was going to have to tell the people that the piano was done for, when I read that shellac puts up a permanent barrier to animal odors (that included dogs and cats). So I tried it as a last resort and IT WORKED. Because I had to be careful not to warp the keybed of the piano, I used a "spit coat" (for anyone who remembers The Furniture Guys) of 3 parts denatured alcohol to 1 part shellac and, in spite of the watered down version, completely sealed the keybed (in case you hadn't guessed I'm a piano tuner/technician as well as a mini nut). Ana Gerard |
Paint applicators: I have found that those triangle make-up sponges make the best paint applicators for miniatures. I use some uncut for large items, others I cut lengthwise in half or thirds, depending on the size of the item I am painting. Not good for detail though. MAP in Puyallup |
Book Roombox: I found an old set of encyclopedias at a yard sale for $5. We have chosen #23 for one teacher, cause that is also her room #. I haven't started yet but was thinking about this process. (promised the li'l one we would start this weekend. 1. Open the hardback cover 2. Mark where you want the 4 corners and drill a hole through all pages. Make sure you don't drill through the back by masking taping your drill bit to the depth you want. 3. Slice with a SHARP blade from utility knife or x-acto. 4. Now that the pages are cut flip through them and spray with glue as you flip 5. Gesso the front page and inside you have cut. 6. We have been collecting school items for ours and will be making a shadow box effect display of their favorite things. Some like science, math, biology, etc. We will be cutting matboard and tonguing it together by cutting a slot 1/2 way thru each piece. If anyone has a better way, mine hasn't been started yet, so am open to suggestions and undoing my mistakes before I do them! Lisa Lynn |
Hardwood floor using iron-on wood veneer: I looked in the archives and didn't see anything about it. I just "laid" the floor in my dollhouse this way, and it looks, as my teenager said when he saw it, "way cool, Mom!". I used the 3/4" strips (comes in a roll), cut it down the middle, and made 6" planks. Then, I just ironed it on in the same kind of pattern we used when we laid our real floor. It comes in oak, cherry, or pine, although only oak was available at my local Lowes home store. This was fairly inexpensive (2 rolls and a little more for each 15 X 29 floor), and gave a little more lived-on look than a sheet of flooring. Linda in NC Mtns |
| Previous 10 | Next 10 Page 620 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |