Disposable Aluminum Pans: A friend brought me a dessert in one of those rectangular pans, and I noticed this one had a fancy, scrolled design on the bottom. They aren't pierced, of course, but thought they could be for hutch inserts, etc. since the design is already there. Maybe washes added for the old look. Theresa Thomas |
Tin Roof: Have you looked at a tin roof? What does she remember about it? Ridges? Use strips of wood for the ridges, cover them with TORN newspaper and Mod Podge/wallpaper paste to round the hard edges, let dry. Paint with metallic paint and weather with water and India ink or greyed paint. What she really remembers is the sound of the rain on the roof so, she needs the visual reminder of metal in the correct shape. Laurie Sisson |
Beginner's Resources: I took a look at the Dollhouse Miniatures magazine site and it had a lot of information on basic tools and supplies, as well as techniques which would be very helpful to those of you who are new to this wonderful hobby. http://dhminiatures.com/FAQ/Tips.html Alice Zinn |
Tin Roof: You could save the large paper thingies in which 4 light bulbs are packaged and use the inner, corrugated side for your tin roof. It can be painted with draft paints, then when dry sprayed with clear acrylic spray to give it a slight sheen. If you want it to look old, splotches of brown or reddish brown here and there will "age" it. Just an easy, inexpensive alternative to real tin roofing. Mary in MS |
Tin Roof: For the tin roof, you might try gluing half rounds (1/16 or 1/8) to your roof boards, spaced approx 1-1/2" apart and then lay tin foil over the roof area, pressing in and around the dowels. I think it would make a fair looking roof. You would need to dull it somewhat to be more realistic by giving it a wash with acrylics or spraying it with a sealer (I got some from a ceramic dealer once called "Porcelain" finish and when sprayed on everything I have tried it on, it dulls the sheen.) Marjorie in CA |
Tin Roof: Do you have a Starbucks near you? Now don't laugh, their cup holders are corrugated like a tin roof is. Now I haven't tried this but always thought I would if I needed to improvise a tin roof. Spray with a gloss silver spray and see if it works. If you want it to look aged, I KNOW there are some people on here who can tell you how to do that. Jean Lierman |
Realistic Weights: Get thee to Home Depot's fastener section and get some nails (long ones). You will have to remove the heads and points, then get some washers (usually in the same section). The rest comes naturally. Dr Bob |
Rolling Base for Dollhouses: For my biggest, oldest dollhouse, I bought a breakfast bar table. It's 18" wide by 48" long and 36" high. To make it easy to roll on carpet, I got the big, wide casters and a drill bit big enough to accommodate the caster posts. For my San Franciscan, I made a table with full-scale staircase spindles for the legs. The braces are 2x4's. Because the spindles were so narrow and delicate, I couldn't use the big casters but the little ones roll on carpet just as well. The tops of the spindles have round knobs on top that are meant to fit inside of stair railing. Instead of shaving them off, I drilled holes -- not all the way thru -- into the plywood sheet that goes on top of the table so it fits over the knobs. The house is glued and screwed to the plywood but the plywood can be lifted off the base. I finished off the plywood edges with moulding. I actually built the base before starting the house. It made it easy to work on because I could roll it over to where I was working and turn it around as needed. For my Christmas Shop, I used an old wooden stool I got at a garage sale for $2. I drilled a hole thru the middle of the seat. Attached a 9" turntable to seat and dollhouse. Ran the electric cord thru the hole. For a small house, I think turning the house is easier than turning a table. I plan to use stools and turntables for all my small houses. Sally Cook-Thomas |
Rolling Base for Dollhouses: I designed a rollable cupboard for my dollhouse which my very talented wood working hubster made for me. I was very limited for space to display my Dollhouse. The only spot I could find was to have it wedged at the end of a hallway. I ran into a problem displaying it because once I set it there if I wanted to see the inside it was such a chore (and also a risk for ruining the floor) to turn it. The cupboard I designed looks the same on both sides and is mounted on casters wheels. They are hidden by the trim molding along the bottom. Its so easy to turn, move and is attractive from either side. On one side the doors open with shelves inside for storing minis. The other side the doors are faked. They don't open but they look as if they do. Leslie, in Buffalo |
Rolling Base for Dollhouses: I don't remember what site it was but it had absolutely fabulous dh's - the lady who created them said she gets unfinished bathroom sink cabinets and puts them on castors. I thought this was a great idea, 'specially since my DH is not the wood-working type! All I'd have to do is put a back on the cabinet and finish it to match the dh. I often seem them on clearance at Home Depot or Lowes, too, so I think it could be fairly inexpensive. Linda in NC |
| Previous 10 | Next 10 Page 622 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |