To clean out a pecan: - The best pecans are the dark red ones. Their shells are the hardest. The meat inside a pecan is similar to walnuts in that it is divided by membranes. These membranes all hook to the shell at the pointed end. File off the pointed end of the nut, with a fairly course file until you have a hole about 1/8" wide by about 1/4" long. Once you file into them they come out fairly easy. Use nut picks and a sharp knife blade and carefully dig out the meat. Go slow and shake the pieces out a little at a time. The great thing about it is you get dessert while you work. I love pecans. ****WARNING**** Do not try to cut the pecans with a dremel or any other power cutting tool as the shell is very brittle and will shatter. It could end up causing the cutter to cut into your hand. If you want to cut the shell in half use a jeweler's saw with a medium blade. Bill Hudson |
Fairytale Book Room - Find a book that has a two or three fairy tales that you like in it (or you could use a book with one fairy tale as long as each chapter has a different title). One of those thin kids books would work great, if you could find one with an interesting cover that isn't so busy it would take away from the exterior. Set it on a circular turntable, open it so that there is a right angle between the outside of the front and back covers (this will be the garden or outside of the house. Open it to one of the stories (that you'd like to do vignette of) so that the title shows for that segment, then open it so that a different story title shows for a second segment. You want to divide the book into 3 or 4 segments and each with a different title so that each can have it's own scene. Glue the unused pages together and add a piece of wallpaper covered mat board against the untitled wall for support. Smallstuff Member |
Containers: I have two 10 gal fish tanks, which house miniatures. One a Holiday Shop with many gift exchange items and things I have made myself, all Christmas related. I have a sheet of quilt filler on top to resemble snow and a few larger items like Santa and Reindeer. The other is an Asian antique shop. It looks just fine on the inside, but I wanted it to have a more Oriental look on the outside. A friend gave me a pair of very heavy black "temple dogs"? which I have on each side of the lower roof. Bought DH some socks the other day and was about to toss the black plastic rod hangers in the trash, when I took a better look, they have curved back ends, and those are staggered. The effect is like the pagodas in the Orient. I glued them on with tacky glue. I like it, I like it. There was a water line mark in the fish tank I got at a garage sale, which has been impossible to remove. The tank is plexi glass. I didn't want to scratch it. I found in DH's car stuff box a bottle of Dura-Shield, a vinyl and plastic cleaner. It felt very smooth to the touch, so I put a dab on an old handkerchief and rubbed the water mark away. So far it hasn't come back, the way some water marks do, when you think you got rid of them. I guess DH got it at Shucks or in the auto dept. of K mart. MAP in Puyallup |
Walnut shell scenes: Curious as to what else you can put in walnut shells? See the "In a Nutshell" articles I wrote for Nutshell News/Dollhouse Miniature magazine: Dec., l995 "Waiting for Santa" Marilyn - Wisconsin |
Walnut shells: I have made cradles with walnut shells. And Sammy Smith has tiny porcelain "wee" baby fairies that fit in them for $12.00. You can see my walnut shell fairy cradle here: http://gerdesdesign.com/northwest.htm Sammy's site is http://home.ici.net/~sams/happiness Anne Gerdes |
Wedding Cake Columns: I instantly thought of my wedding when you mentioned your columns. Our "floral designer" brought in four very tall columns to the chapel at Johnson Ferry Baptist church in Marietta, GA. She put beautiful greenery on top of each one with feathery fern-like greenery cascading downward. This delicate greenery was repeated at the top corners of each window which she had draped in sheer white swags. So, I guess my idea would be to do a miniature wedding scene...seems appropriate since the columns originated on your wedding cake. Let us know how it goes! No matter what you choose to do with them, it will be fun and I'm sure it will be beautiful. Paige |
Wedding Cake Columns: You do not need to use the wedding cake columns in a scale smaller than one inch! They can be gilded to display artwork or plants, used to support a wonderful shelf full of sculpture, or even cut down and made into a garden bench! Alice Zinn |
Wedding Cake Columns: Here are some 1:12 scale ideas for cake columns: Column for a bird bath Sandra in New Zealand |
Wedding Cake Columns: don't let the pillar size stop you. I've adjusted the height on them by gluing them to a wood block and then using fleckstone on the whole thing to meld them together; used this to kit-bash porch supports for a Tiffani kit so it looked more 30s bungalow, and also used them topped with a grid made out of chopsticks to create a garden pergola; makes a nice change from the usual gazebo. Loretta.Sniarowski |
Painting Lines with Shaky Hands: Easier said than done. In one of my past lifetimes i was a sign painter and pen striper. I painted advertisements on trucks and race cars, I also pinstriped cars. In 1956 I could run a 1/16" pen stripe the full length of a car from the head light to tail light with out a bobble. Now- no way. it is possible but it takes lots of practice. I don't' practice now and I pay for it. had a heck of a time striping the pedal car. Lucky it is aged. For full size striping a pen 9 long tapered bristle brush with a little short handle) is used. For miniatures long fine brushes work best. For a palette I used a piece of glass glued to a square of plywood with a handle sticking down. I held this like a mason's hod. I applied a puddle of paint, a puddle of turpentine and a puddle of thinner. i worked the paint till it would form a small drop hanging from my pen with out falling off. Once the desired consistency is reached i loaded up the brush (pen) then wiped it back and forth on the glass until it formed the correct point. I made a couple test stripes on the glass before starting the line on the car. This works fine for miniatures but you need a much smaller brush. Hold (pinch) the brush between for finger and thumb. Use the other fingers for guides and glides. The real secret is to use you whole arm as if your wrist was fused to your arm. If you try to move your wrist you will not get the flow of a straight line. You can use templates by attaching a guide on your brush. I can tell anyone who wants to know more about using templates, more on the subject by private e-mail. Bill Hudson, Eugene, Oregon |
| Previous 10 | Next 10 Page 624 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |