Clear Display: I have used an inverted 10-gallon aquarium as a cover for a scene quite successfully. I found one with a clear bottom at the local mega-pet store (big store, not pets) for about $12.00. I built my scene on a styrofoam base that I cut to the size of the aquarium opening.

Chris in Minnesota


Cutting Plexiglass: To cut plexiglass the best thing to use is a table saw. To do this you need to put a cutting and drilling liquid on the blade. This is a product sold at tool suppliers and possibly hardware outlets and it helps reduce friction. It seems to be an oily substance but I am not sure exactly what it is. One that I have used is called "Cool Tool". A note re safety though, always remove the electric plug from the outlet before doing anything with the blade! After that, use a tissue or cloth to wipe the substance on each side of the blade. It is a good idea to wear a total face mask as well as the "sawdust" from plastic is hot. It won't hurt your hands or arms but you will feel it. I always use a full mask when I use a table saw as one can never be sure where the sawdust will fly. It is not worth it to get a piece of wood in one's eye.

June Simpson


Cutting the opening in tin cans:

1. Draw the circle a litlle smaller than you want.

2. Poke a hole in the middle and start cutting the hole smaller than you want.

3. Then cut slits to the size of whole you want, kind of like when you trim the interfacing on the curve

while sewing.

4. Lay the plastic you will be using as your window on the inside of the tin.

5. Then fold the tin over the plastic. This will hold your plastic in place.

6. You could trim the inside sharp edges with some trim of your liking to prevent cutting yourself while decorating or rearranging.

LISA LYNN


Cutting Tin: WEAR LEATHER GLOVES. If you cut the opening with tin cutting shears leaving an extra 1/2 inch to be turned under CAREFULLY using pliers or other tools, you can obtain a neat smooth edge to finish your opening (harder to do with circular or other curved openings.)

Bonnie in Tucson


Basement: Is the "basement" outside made of wood? If so, you could cover it with creative paperclay. Rik Pierce of Frogmorton Studios wrote a great how-to article. It's in the May 2000 issue of Miniature Collector. The stuff is REALLY light, an most forgiving to work with.

Trish


Basement: I have used this for the foundations of some of my buildings, but to make it 11" high I would recommend using 2" thick cut to size and insert wooden dolls every 4-6" to support the weight of your house. I used a ball-point pen to groove out a stone or block design painted the whole thing light gray the used a darker gray to pain the grooves to look like mortar - you could finish it what ever color you would like.

Jo


Basement: There is a wonderful article on a "Haunted house" done on a "rock looking" hill, in the October 1992 issue of Nutshell News. Sounds like he covered Styrofoam with a thin layer of plaster that was textured by using crumpled tin foil! Looks very realistic too!

Linda


Painting Tip: I have a tip that I hope I wasn't the last person in the world to find out. I love Accent's Razzle Red, but it is a shear color and I've always hated that it took many coats to cover a project. We are doing a building that is old and for patriotic ''stuff''. I wanted the trim to look like it had many coats of paint and I just grabbed the first paint I saw on my work table to cover the trim first. It was Delta Ceramcoat's Wedgewood Green. When I painted the red over this--one coat covered it. So when painting red, paint with green first.

April Gill


Painting Fine Lines: What I usually do to paint really fine lines is to cut a piece of heavy paper into a fine point, or for longer lines just use the edge of the paper. This works really well, but you have to keep cutting the paper to get a fresh point after a few dips in the paint.

Tori


Sticky Paint: I use tons of wax paper when painting or gluing minis. It keeps your work surface clean and the things don't stick to it.

Marilyn


Previous 10 | Next 10


Page 628 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)