Sticky Paint: When I was building my shop, the pieces that made up the windows were so tiny! What I did was to stick a long pin CAREFULLY into the end of each one, held the pin while I painted, and then stuck the other end of the pin into a block of expanded polystyrene to dry. Worked very well. Just make sure you don't split the end of the wood where the pin goes in. In fact I used this method for the bigger pieces too, then wound some wire around the head of the pin and suspended them from my clothes airer. Jan |
Paper doilies for architectural detail: When I built my first structure 20-some years ago, I enhanced the front by cutting out, then gluing in a stack, a full package worth of the same motif that I repeated 3 times on the front of the shop. Since then I've also used this technique to make "pressed-tin" ceilings and the effect is perfect. Much cheaper than the plaster ceilings you can buy, and you can adjust the sizes and details to fit any room. Kate |
Doilies for ceilings: I used the plastic doilies that are sometimes sold, to make fake plaster ceilings. I didn't even have to paint them. The ceiling was white and the doily fancy detail was picked out in blue and gold which fitted right in with my antique shop color scheme. Roberta |
1/4 Scale Teapot Walls: There are three options I'd suggest for your teapot walls. One is to snip thin wedges out of the paper to help it conform to the teapot curves, something like the way tiny 'v'-cuts are made in fabric to help ease it around a curve. The second is to cut walls from matboard and fit those in place rather than leaving the interior curved. I think I'd paint the curved walls, then if you want a print you can either paint dots or flowers on them or cut little bitty designs from paper or fabric and glue them in place. Pam |
Painting on Plastic: I have found that if I base plastics, metals, etc with a coat of Krylon primer (auto body gray is my favorite), I can even use nail polish on plastic with great results. There are two older articles in NSN (Dollhouse Miniatures) July 90, pg 50 is an article by Pat and Noel Thomas on using spray paints on Chrysnbon to get really realistic finishes. I tried it and have been very pleased with the results. Nancy |
Painting Plastic: There is a wonderful paint to cover plastic and anything else you might like to cover......I use the white paint to cover plastics and spray just a light coat and then use the color I want over it. It's called Kilnz.....and it's fantastic. Most hardware stores have it. It's a bit pricey but it will cover anything! Georgina Hanford Simmons-Gagnon |
Marquetry; When I paint in water colors and I want to prevent an area from getting "washed" I paint it first with plain rubber cement. The wash stops at the margin of the rubber cement. Then when the paint has dried I rub the rubber cement with my fingers and it comes off. Exposing the unpainted surface below it waiting for me to paint it. Bob |
Sealing Printed Materials: Any time you use paper printed with ink (computer or print shop) be sure you spray it with a fixative for inks so inks won't smear when the glue hits. Find these with artist supplies. The matte finish is my preference. If you want to seal it after it is glued into place, use Modge Podge for gloss finish. Laurie Sisson |
Finishing Tips: If you use several different colors of wood stain and mark your pattern out on the wood you want to use you can make a very fancy floor with very little work (yeah sure) but it looks great. Use a stencil or mark it out with tape and then do the next part when that has dried. I have seen it done in full size and it really does look pretty. If you make copies of the inside walls and ceilings before you assemble your house you can then cut the matte board or what every you are using, real easy and the pattern is easy to get that way. This is for putting your paper on so that you won't have bumps from your wiring and if you decide to redecorate it someday you can remove the sections and do it really easy.. This is also a good idea for your floor covering or carpet. Charlean |
1/4 Scale Teapot Walls: Imagine a little, white box of Chinese food. Turn the box on it's side, remove the top. Now, if that were unfolded, it would be easy to wallpaper wouldn't it? Blue Teapot 2000. I used this method to do the interior. It creates space under the lid to put surprises? Laurie Sisson |
| Previous 10 | Next 10 Page 629 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |