1/4 Scale Teapot Walls: Suggest pre-painting and then apply whimsical decals? Model railroad stores and a few mini shops have a solvent that makes decals more flexible than usual so they may conform to the interesting back shape. If you build false walls, don't lose the in-between space entirely. Paint and "plant" a backdrop on the pot wall and include a window or two in your false wall. Plan ahead so windows align with point of greatest "exterior" depth. Mel in Vegas |
Mini Pine Cones: Lorrie Harvey has very low priced mini cones on her web site that is mostly for "stained glass." You may have to search a bit. http://www.suite101.com/myhome.cfm/minilorrie Bar Turner |
Thinning Leather: To thin down your leather samples you need a skiving knife. I don't know whether Tandy Leather Co. is still in business, but that is where I got mine many years ago. Any craft shop that sells leather craft supplies should have it. Sylvia in MA |
Thinning Leather: You can turn it upside down and file it down using a good quality emery board... but be careful, it files away quickly and you don't want the leather to get too thin. (This was one of the hints in our "Dolls & Miniatures magazine, and not my original idea. But it works! Viola Williams |
Thinning Leather: Two ideas for thinning leather; #1: turn the leather so the finished side is down and tack or nail it to a board. Use sand paper on the unfinished side to remove some of the leather. #2: This method will make the leather more supple (softer and pliable) Rub the leather either side; with candle wax and then beat it with a hammer as you would veal to tenderize it. Dr. Bob |
1/4 Scale Teapot Walls: Why not just use strips or squares of patterned tissue paper or paper napkins and decoupage them on the teapot walls. The paper is thin and more forgiving than the thicker true wallpaper and would allow you to follow the curves better.It won't be an even, neat lining up like true wallpaper and you will still have wrinkles, but they will be less obvious and it will add some color and a semblance of wallpaper. Parisa |
Champaign cages: I use them for four sided hanging lampshade frames by twisting the top square part a bit smaller and by curling up each of the 4 bottom ends a bit shorter. You can also use the top corked cap piece for the top base and drill a tiny hole for the wires/bases etc. I then create my four-sided design (or leave it plain) and print it out on tracing paper, seal it and then mod podge it to give it clarity and shine. You may also use a light parchment paper, they really turn out nice. They also make a Gold colored Cage, which make beautiful pieces. Can't wait to try the bar stools. Brooke, WA |
Cheap Trunks: I too purchased those beautiful little $.97 trunks at Wally's. The sides are a bit thick for scale so I lined the trunks with cloth and turned and glued the edges close to the inside outer edge of the trunk to give it the optical illusion of having thin walls. Hope this makes sense. Brooke, WA |
HUTCHES: I took one of the hutches from Michaels and painted it midnight blue. Then splattered it with white paint. Next I made a small kitchen table and painted it the same way. I did a little trimming with white paint, around the drawers, a little scroll work, and the knobs on the doors/drawers/table legs. They look great! Today I had a white bookcase I'd made from mat board and splatter painted it in 3 shades of green. Looks like it would go in a kids room. (another project) Then I made another table and painted it a deep green. Put a white circle around one place on the legs, a light green on the bottom circle of the legs and put dots on the part of the leg near the table top. Now, I've got to decide which hutch I want to put with this table. Terri Young |
Very Fine China: I have some very fine china from many artisans (none of them Bespaq) on my website. Everything on my site is in stock and I will do special orders if it's not in stock. Carol |
| Previous 10 | Next 10 Page 631 of 1032. Total links in database: 10312. |
|
Browse the database (all entries) |