Wicker Ideas: This Bend, OR, firm makes dollbuggies and related toys in Victorian styles, wicker and iron. Apparently authentic designs; could be a great pictorial resource for wickerworkers..

http://www.newsom.com/buggies

There are also some iron hatstands. Look at them and you'll immediately start thinking of contriving your own from assorted jewelry findings, etc. We often think of hatstands as having head-size tops, but these don't. As I recall a wonderful Illinois shop for cheap hats in the 1940's, theirs didn't either. (This shop would be fun in a mini version. You bought your hats and trims separately, cafeteria style. A feast of ribbons and flowers. Probably feathers too, though I don't remember them.)

2. There's also a picture of a glass and iron bistro table. A bit flimsy-looking, but the legs are trimmed with iron cutout leaves. If you have those oak or maple leaf box punches, you might get some additional mileage out of them this way. It wouldn't have to be that particular design. You might need to thicken the leaves by layering two or three together. Or maybe the acrylic gel recently mentioned by Mary Kinloch would do the trick here? (These and other punches can be used for stone work too.)

Mary (Oregon)


Camping Articles: I checked thru back issues of Nutshell News (now Dollhouse Miniatures) and found some articles for the lady asking for ideas for camping/beach scenes. So here goes.

Aug/95 - lantern, campstove, ice chest

Aug/94 - sleeping bags

Oct/82 tent, campfire, coleman lantern, canoe

Also in Miniature Showcase:

Summer/91 - hot tub, deck and accessories for the person who asked about this in a previous digest.

Spring/87, Summer/91, July/93 - all very good landscaping and perspective issues with tips from experts.

Donna


Scrimshaw Carving: There are two products that are great when carved in miniature. One is a plastic called "ivorine" and the other is the Columbian vegetable ivory known as "tagua nut." Ivorine you can get through some art supply houses and tagua nut can often be obtained from places that specialize in wood and inlay materials. I bought a few pieces from "Woodcrafters" catalogue a few years ago and have never tried them, but I have seen extraordinarily beautiful bowls made from it sold at C&J Galleries.

The thing I like about Tagua nut is that it polishes like ivory when you turn it on a lathe, and it has a really beautiful "miniature" grain as well. The disadvantage is that it has a hole down the center so it needs to be sliced into sections that avoid the hole before being turned on a lathe. Someone I talked to also mentioned that it was best to soak the nut before using it, but I cannot confirm this

Lynn O'Shaughnessy, Princeton, NJ


Easy Inexpensive Flooring: For years, I've used the very thin balsa wood, I think about 1/32" thick. A strip 3" wide and about 36" long runs $1 to $1.25 depending on where you buy it. Score it with a pen or pencil, according to the type flooring you want (fine, narrow evenly spaced strips for a "nice" room or wider, more random strips for a more casual or rustic look.) Then, since balsa doesn't like stain much, I use paste shoe polish. Just rub it on, no drying needed. Tan polish gives sort of a blonde oak look, which I don't care for, but a light coat of brown is more of a golden oak ... add a little more and it's more of a maple-ish tone. Oxblood -- who knows? You can then lightly sand it for your traffic areas, or put a high gloss on it AFTER it's glued down and dried. This is CHEAP and easy -- I just did both levels of a small Greenleaf kit for under $3. Mail me privately, and I'll try to send you a picture of the finished floor.

Paula Isaacs


Carving/Turning: I read Lynns' note about Ivory (Tagua) Nut - she is right, it is a nice substitute for real ivory. You can't make really big items out of it, but for miniaturists that shouldn't be a problem. In fact, on the scimshaw globe on my miniatures album, I turned tagua nut on my lathe to make the decorative finials. I have seen tiny goblets and such made from it and it does scrimshaw well. You can also do scrimshaw on other items such as turquoise and other soft stones, antler and bone, but ivory is still the easiest to work.

Bonnie in Tucson


Easy Inexpensive Flooring: I made flooring from the backing that came with the mini flooring I bought, I made lines with a ballpoint pen in black, then stained it. I guess I could have put a gloss coat on but I did not think of that. When I laid it, it looked good. I did put pin holes on with the pen. Try it.

Chris Evans


Turning ivory nut: I've turned it many times, and it carves and turns marvelously, but it smells like burnt toast. But it looks good, although a bit more white than ivory. There is a hole, which if properly planned, can be put to your advantage. (I've never soaked it first)...once I carved a baby dragon "hatching" from the nut, and I glued a cool crystal into the space in the center. It looked like he was wrapped around the crystal, and the outside of the nut, which is rough and brown, made up the bottom of the "egg" in which he lay. I called it "born in fire". The fellow I know who does the narwhal tusks works in beef bone. I've never heard of ivorine, but as an old Alaskan, I have a goodly supply of walrus teeth, which are still legal to jewelers and craftsman, as most can be found on certain beaches in AK if you know where to look.

Dave Pierce


Scrimshaw: Art Werner's miniature ivory scrimshaw has to be seen to be believed! He has whaling tools and other ships items too. You can contact him by mail:

Arthur F Werner,172 Louvaine Drive, Kenmore, NY 14223

Leslie, in Buffalo NY


Easy Inexpensive Flooring: Before you assemble your house, set it up and mark where the floor will be. Score with an awl down the side of a metal yardstick. I marked mine 1/2" apart and, although that isn't in scale, it accentuates the floor. I feel that if any smaller, you would be covering up all your work. Then add some lines across your marks to resemble joints in planks. If you want nail holes, just tap the awl with a hammer right by your joint marks. Sand the floors and stain! I did try to wood burn some of the lines to see what effect it would have and the burner operator got a little off track from the wood grain, though it would look great in a old 'lived in house (like my real one, with kids and pets)or a log cabin setting.

Lisa Lynn


Scrimshaw: My uncle, an engraver, also does scrimshaw. He gave me some really nice poker chips made out of the faux ivory that were just the right size for small pictures. Maybe you could find some of these in antique or thrift stores . I also did a piece of scrimshaw on a slice of deer antler but it took a LOT of prep work to get is smooth, so overall wasn't really worth the trouble (and it never did get really smooth like ivory does, but it was an interesting effect nonetheless).

Tori


Previous 10 | Next 10


Page 637 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)