Casting lead: Low temp casting lead is not really lead it is a combination of metal salts and such that melt around 190 degrees. Some are expanding as they cool others do not. I believe the metal offered at micro-mark is expanding kind which is best for detail. have not use it though.

It can be cast in anything that will stand up to 190 degrees. Best molds are from RTV. If you can vibrate the mold as you pour it will give you more detail.

Drawbacks of this kind of metal. They melt under spot lights. When My friend and I first started casting metal for model railroad kits we used Cero Bend. 190 degrees melt. He painted one of the kits after assembling it for photographing. The photo lights that were set up melted a wheel closes to it. All that was left was a shell of paint.

These are the kind of metals that were used in the melting spoons that were sold in trick catalogs in the earlier years. The metals are sort of toxic so not too good of a trick.

There are many uses for the metals including holding parts while making them. The most use comes from indoor fire sprinklers. The little tags that keep the sprinklers off is made from such metal. When it gets hot enough to melt the seal the sprinkler comes on.

Bill Hudson


Warping, etc. What kills the wood is not the heat ... or the moisture ...

As a piano tuner/technician I have worked on pianos from all over the country. Here in Vermont, it is the constant changes in temperature and humidity that wreaks havoc on the pianos causing the soundboards to crack and the pin blocks to fail(that's the part that holds the tuning pins in place). Humidity causes wood to swell...dryness causes it to shrink. Think of a rubber band you keep stretching and then let go - pretty soon it breaks. On the other hand I picked up a grand piano in Denver (made in 1922) that looked as though it was just out of the showroom (Denver has about a 10% humidity rate) - it was even still in tune and had not been tuned for 20 years! If you take a piano or furniture to Denver from the humid East Coast you end up with kindling wood - the other way around you end up with sticking drawers, etc.

My point here is that for stable wood conditions you need a constant temperature and a constant rate of humidity to keep your wood from failing. For the pianos here I have an air-conditioner plus a de-humidifier in the summer and a humidifier to make up for the lack of humidity in the winter – I don't know how your climate is in your section of the country, but let's say that it is very humid (likeFlorida) and you put your dollhouse over a radiator it is going to create warpage, loose joints, etc.

I'm usually thinking $10-25,0000 for a decent piano - you wouldn't risk losing your investment due to improper placing or care of the instrument. Is your dollhouse any less valuable to you? When you are talking dolls houses be realistic about how much you have invested (both time and dollars) and don't throw your investment out the window.

Ana


Syringe caps: depending on size make good DIY components. I have a very pretty sewing box/table made from an enamel pillbox with syringe cap legs courtesy of an insulin-dependent friend. The caps took acrylic paint well. Other uses: prefab legs for modern furniture; combined with jewelry findings to make vases or lamp bases; decorated with flowers and hung as wall-pocket vases in a 30s scene; topped with a bead, wall-hung torches for a Gothic scene.

Loretta.Sniarowski


Wedding cake columns: Don't forget they make a great base for the infamous garden "gazing ball", especially since the mini Christmas balls that are on sale right now work well. Just cut the pillar down to the height you want, and plop in the upside down ball (the end with the hanger goes down the hole.) Glue on with hot glue or epoxy, etc. You could also recreate the Parthenon.... but guess that would take up a lot of space if you do it in 1" scale!!!!!

Bonnie Gibson - Tucson


Water: Fill your McDonalds "tub" with DAP Clear seal caulking. Found in any Home Depot or any store that carries caulking.

Dr Bob


Rolling Base for Dollhouses: If you really want to put it on wheels, you can build a crawl space type addition with a fairly thick base, then buy large round casters (wheels) at the hardware store or lumberyard, home depot, etc, the kind with four holes to put screws in (usually come with a set of 4. otherwise, buy a cabinet with wheels, or add wheels to an existing cabinet. The other option is to make a firm base at the bottom of the house; like a plywood base with room for landscaping, then before attaching base to house, attach a turntable with screws or bolts, depending on the turntable.

Second Hand Rhoda


Rolling Base for Dollhouses: In answer to the rollable base for a dollhouse question. I went to a school auction and bought something that had been used in a chemistry lab (or something similar). It is on rollers and has shelves under it with a door on one side. My farmhouse fits just nicely on the top with room for my recipe box/greenhouse on one end. When the grand kids come... it can/could be rolled to another room but they're actually very careful and look basically with their eyes.

Pat


Rolling Base for Dollhouses: I made one that you might be interested in. Bought 2 wall hanging cabinets (with doors) and made a work table out of them by connecting with a sheet of plywood. Put castors on the bottom of the cabinets. Thought the 2 cabinets would hold my supplies for my dh...LOL! (Little did I know how *many* supplies I would wind up with!!) Anyway, you could also do the same with one cabinet (from Home Depot or someplace similar), put a piece of plywood or fiberboard on top to be as large as you need (be sure and secure good with screws). They could put extra furniture, or just other toys inside the cabinet door. I love mine...but I outgrew it for supplies immediately after starting to work on the dh. Hope this idea helps you.

Rita Pierce


Rolling base for a dollhouse: my two big houses are on wooden TV stands on casters recycled from the flea market. If your house is bigger than the dimensions of these stands, you could cut a piece of plywood the right size and screw it to the top with metal L-brackets, then paint the whole assembly to match the house. I find carts handy because they move for the rare times I clean the workroom, and my glass-topped aquarium gardens fit on the bottom shelf (no worries about dusty shrubbery that way). A rolling kitchen island might work for larger houses if the jerry-rigged TV cart sounds too tacky.

Loretta.Sniarowski


Here are some URL's to use to give the address you're starting from (motel, your home, whatever) and the address you're going to. These online websites will print maps for you and even print exact driving directions from your front door to your destination.

http://www.mapquest.com/

http://maps.yahoo.com/py/maps.py

http://www.mapblast.com/myblast/index.mb

http://www5.MapsOnUs.com/

Wilma Kinder


Previous 10 | Next 10


Page 641 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)