Mini Animal Skin Fur Pelts: If you're looking for realistic miniature pelts for a trapper's cabin (great project, by the way!) and if you don't want to skin real mice, how about those fake mice that cats love so much? I think they're made with rabbit fur, but they come in all sorts of colors and I bet you could dye them, too. You could cut them to the right shapes, and clip the hair, too. I got a pack of five, white and grey for $2.50.

Christine (San Francisco)


Decorating with Real Wallpaper: If you have a Home Depot in your area I have found they will give you a big enough sample piece for most rooms and especially ceilings. They have one great white paper with the raised pattern that simulates the fancy old ceilings. I use this often. (There are several so be sure to really look at them only the one works well. In 144th you can use a lot of these by thinking in parts and pieces more then the full pattern. Example: part of a stripe might make great wainscoting or a thin stripe of gold may be cut out as a trim piece or part of one stripe and part of the adjoining one may be the wainscot and wallpaper above it all in one. A finely marbled piece makes fireplace fronts, hearths and bathroom, entry or hall floors. A lot of ways you can go to get the look you want. I do a lot of hand painting of paper pattern on walls in my 144th but that is just another option.

Anita McNary-Haynes


Blue Rubber Bands: ...or any other colour! Make thong sandals. Cut the shape of a foot in the rubber band. Then with glued together embroidery thread of the same colour or contrasting, or other thread or strap, bring a double strand up through where the big toe and next toe to it would be, split the thread/cord , and tack down one along one side, the other down the other side. Ta-da! You have one thong sandal! Now make one to match.

Jonesy


Painting: In fine art artists often paint a base picture in watercolor or acrylics and then when dry, paint over it with oil paint. The general rule is thick over thin. Thin, water base products, dry quicker. Oil paints often take months or years to dry completely. If the water based is painted on top of the oil, the oilwill not dry right and the painting will never set right.

Mary Lou in Portage, IN


Wood shavings tip: Take thin wood shavings, dunk them in water 'in and out' - no need to soak - and flatten them under weights for a week to make sure they flatten, putting them between newspapers to absorb the water. Then peel off paper. Voila - the thinnest flat wood, which can be cut with scissors like paper, to make flowers or anything for which you may ordinarily use thin card.

Helen from York, England


Wood shavings tip: What I did was to create a fairy dwelling. I started with a small balloon. I covered it with kite string fairly heavily. Then I coated it with Elmers glue and let dry. I popped the balloon and disposed of it. I cut a hole in the ball of stiff cord for an opening and glued it down to a piece of oddly cut foamcore board. I then used the wood shavings in their natural state as a covering. I used some green and brown mosses as well. I covered the foam board with moss also. Then I decorated the inside with found things to furnish it. Finally, I turned a keychain Barbie into a fairy and it was complete. It was a fun and very easy project and the person I made it for loves it.

Dottie in Florida


Plaster vs. Joint Compound for Piped Molding: You could try joint compound, but I expect you will be disappointed. Joint compound is designed to shrink as it dries, thereby making the joint less visible (ever noticed that they have to cover nail heads 2 or 3 time - cause it leaves a dimple when it dries). This will make your 'molding' smaller than it started. More significantly, if you have it very thick (like over 1/8" or 1/4") the surface will dry too quickly compared to the inside, and it will crack. Using joint cement, you have produced an object from glue, which is still water soluble.

Plaster, on the other hand sets up by a chemical reaction, not by drying (which happens later). The reaction happens quickly and the entire batch sets all at one time (or very close to it). By using plaster, you have basically made something of stone.

Tom Berkner


Widows Walk Flat Roofing: I would do it the same as my parents' roof. It is tarred wiyh small gravel attached. To get the same look as that, paint sand paper, then you can sponge paint different colors for the variety of rocks used or just do straight black/grey.

Lisa Lynn


Metallic Creams: If you wish to change a metal color, such as a frame for pictures, you can purchase buffing wax creams from craft stores. They are used to give different finishes to wood items, and are used mostly on picture frames. Just wipe the cream on the piece, and you have an entirely new look. I moved into a 1930's house, which had a huge yellow plastic medicine cabinet. I primed it with gesso, painted it black, then rubbed in silver cream. It looks spectacular! Just like an old, tarnished silver frame. These cream waxes come in all shades of gold, silver, black, white, copper and bronze - great item.

Mary Barry


Bronzing Powders: If you wanted a sparkly look, such as gold flecks in Formica, use bronzing powders. I apply a coat of paint or varnish to item, and then blow some of the powder onto the wet finish. Be very careful not to inhale the powders though! You could also mix the powder into the polyurethane, which makes a transparent metallic surface that almost looks like the metal is floating on the surface.

Mary Barry


Previous 10 | Next 10


Page 643 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)