JAF catalog is $10. Write to JAF Miniatures, RR 3, Osceola, MO 64776 or phone 417-646-8642 (Mon to Fri - 9am to 4 pm)

Paula


Dogs with real hair. Contact Peggye Mills at pegnstax@idworld.net I have two poodles from Polymer clay that have fur. She did an excellent job on them. She takes custom orders and works from pictures furnished by you.

Katherine


here's info for Cat's Paw. Really nice folks.

Cats Paw Doll Accessories
Pamela and Michael E. Lembo
336 Candlewood Lake Road
Brookfield, CT 06804

Tel: 203-775-4717
Fax: 203-740-8146
melembo@snet.net

Judy in CT


Applying shingles. Lay out a straight edge on your workbench about 12 to 18 inches long. Could be a ruler or a piece of wood, just so it's thicker than your shingles. Line up a row of shingles against the straight edge. Take a long piece of masking tape and apply to the shingles, lift and stick an end of the tape to the edge of your workbench. Make a dozen or more. Using a tacky wood glue (Roo Glue for wood is good,) you can apply a row of shingles at a time. Usually, by the time you get to the end of the first row, the original row is set, remove the masking tape and apply the next row. Sure beats gluing on one at a time!!

Also, remember to apply a row of half shingles or a spacer board the same thickness under your first row, flush with the edge of the roof. This keeps each row at the same angle.

Ruth


I have found the best thing for shingles is an alcohol soluble analine dye. You can get it from wood workers shops (one of which is 1-800-645-9292 for a catalog). Because its alcohol, it dries quickly and doesn't warp the shingles. Glue them on with tacky, then brush on the dye.

Tom Berkner


Thatched Roofing: For material, use Raffia or broom bristles. Tie the material in bundles and glue these to the roof. If you own a staple gun, the bundles can be attached with the gun. It helps to work from a picture of a real thatch in front of you. As with slats, start with the bottom row and work upwards, so that each row overlaps the row before. Dormer windows are tricky to work around: cover the section over each dormer separately, before tackling the main roof so that you can make an overlap at the top. Trim the edges neatly to shape with a pair of strong scissors, remembering that thatch always has rounded corners and should overhang the edge of the roof.

Sallie H


Slate Shingles: The Dollhouse Factory in Lebanon, NJ lists genuine slate shingles in their catalogue.  To contact them call (908) 236 6404 or write to them at 157 Main Street, P.O. Box 456, Lebanon, NJ 08833.  Fax number is (908) 236 7899.

Wendy in NJ


Aging Copper: For aging copper, there is a product called "gun blueing" or gun blacking.  It is used on weapons to take the shine off them, and is available in stores that sell guns.  Also available in leaded glass stores, since you use it to "age" copper foil when you use that technique.  This will turn your copper dark.  The longer you leave it on, the darker it will get. Denise Jansen

Denise Jansen


Thatch for a 1/4 house: how about fringing out grosgrain ribbon?

Martha Simpson Nock


Lightening Weathering: For the person who is trying to lighten up weathering that is too dark, try a weak mixture of bleach and water.  See what happens.  You can make it stronger if necessary.  Paint it on.

Denise Jansen


Previous 10 | Next 10


Page 648 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)