Cutting Shingles: I use a hand held pair of industrial shears, exactly like the hand held coupon clipper out there, to make the cut, but rarely is the angle correct! I used to use the Exacto and had to make 5-10 attempts without breaking the shingle! I always save discards for the fit it in and birdhouses. I use the discarded skinny pieces to the ridge layer to cover up all the underworkings.

Susan


Formica: You could make a very nice tile floor out of the little color samples of Formica. Cut in one inch squares and glue down. You could even mix colors if you have different colors. For the grout in between, you could use real tile grout. Put a thin layer over all, let it set for about 15 minutes, and wipe off the excess.

jeregrl


Stair Handrail Solution: One of the neatest things I've ever heard of for making a spiral staircase handrail was to use a length of upholstery piping (white twisted cotton). You coat it several times with a white glue like Tacky. As it starts to stiffen, you can form it in the shape that you need, and when it is dry, you can paint it to match your staircase. The final result looks like a carved stair rail.

Anita Myers


Roof Guttering and Drainpipes: You can cut one of those "fatter" drinking straws in half. Spray paint silver and glue to side of roof. The drain pipe can be a straw also (actually, you probably need to lengthen the straw by gluing several on top of each other).

Viola


Stairs: I just finished gluing the pieces of sm. dowel pieces to the steps and hand rail on my house. The way I found to be easiest is to glue the dowels to the handrail first, and then glue the whole thing to the steps.

Tracey in Texas


Stairs: I have learned through trial and error (mostly error!) to drill holes in the treads to accept the spindles before I put the staircase together. Stack up the treads and do several at a time.

Dani Rice


Gutters and downspouts: In the US you can purchase lengths of wooden guttering; painted gloss white, it is very effective. I had my DH drill a hole in the bottom of one end, and I inserted a length of dowel rod for the downspout. I used a piece of bendable straw for the bottom of the pipe - the diameter of the dowel depends upon the size of your straw. One of my very, VERY few ventures into the world of Fimo was to make the little concrete splash guard to go at the bottom. I finished it all off with a puddle of Elmer's Glue, which dries clear, and sprinkled 'doll house dirt' on it for a mud puddle.

Dani Rice


I have the instructions that came with my Houseworks stair kit and the way they indicate you put them together is to first glue down the treads to the risers, then glue in the balusters, putting a small amount of glue on the wide end of the baluster and then placing the end into the hole drilled in the tread. Then glue the top of the hand rail to the Newel post. After the glue has dried then glue the flat end of this Newel post to the staircase top riser. Allow to dry. Align top rail over the line of balusters. Starting at top, gently with your index finger and thumb pull the top portion of the spindle into the groove on the underside of the rail. Continue this process until you reach the bottom tread. Next glue the remaining Newel post to the handrail. Allow to dry.

Gutters and downspouts. In medieval times, they put gargoyles on the roofs to "spit" the water away from the building – so I guess there would have been gutters to collect the water but no real downspouts. I don't know when downspouts came on the scene but I do know that in Savannah, Georgia there are some really old buildings there that have these marvelous downspouts with dolphins at the end to direct the water away from the foundation. I was so fascinated with them that I took pictures hoping to be able somehow to duplicate them for my miniature house. Maybe someone in Savannah could let you know the exact age of those buildings. I plan to put gutters and downspouts on my house. Houseworks makes a gutter molding and I would think drinking straws would probably be convincing looking as downspouts after proper painting.

Doris McIntyre


Gutters & downspouts: My dollhouse kit came with gutters & downspouts. The gutters are made from wood shaped like gutters. The downspouts are dowels cut to different lengths and angles like a real gutter would look. I used a mini miter saw to cut the angles. Looks great. Painted it white, the rest of my house is trimmed in white also. A lot easier than it sounds. Glad I added these, which I almost didn't.

Rachel


Staircases: When I put together staircases, I glue the bottom newel post and the balusters first. Wait til the glue is dry. Then I put on the rail. Last I do the top newel. This is because if the newel was glued you couldn't adjust it without messing up the job. They never seem to be where they are supposed to when your fitting in the rail.

Deanna Spanjar


Previous 10 | Next 10


Page 653 of 1032.

Total links in database: 10312.



Search for:


Browse the database (all entries)